[Gimp-print-devel] 1440x720 Microweave Problems

[Karl H. K. <kh...@kh...>]

It's not just the penguin that's missing it's legs... I run some
tests with the 1440x720 microweave mode. You can see the results
at http://home.rochester.rr.com/specht/test=20
The first one (micro1.jpg) was done with a software version=20
that was a couple of days old, the second one (micro2.jpg) is=20
with today's software.

Micro1.jpg: This shows the difference between softweave and
microweave. I don't remember which dithering method I used
for this.

Micro2.jpg: Here I've done two prints with Hybrid F/S and
ordered dithering. The first one starts out similar to the
one in micro1.jpg, but then there is gap, teh second one
is really weird.=20

These tests were as usual done on my stc740.=20

Karl Heinz

--=20
Karl Heinz Kremer                                      kh...@kh...
                                                http://www.khk.net