Re: [Gimp-print-devel] Dither problem with stc740

[Karl H. K. <kh...@kh...>]

On Tue, Apr 18, 2000 at 08:45:36AM -0400, Robert L Krawitz wrote:
> All three (there were two microweave problems, one related to 1440x720
> and the other one related to the shadows) problems are fixed.  They
> were independent of one another.  This should also fix (not that
> anyone reported) problems with certain HP printers.

Robert,

if I understand you correctly than two of the three problems are fixed :-)

There is still something wrong with the 1440x720 microweave mode on the
stc740: The horizontal position is twice what it should be (if I want
to place the image one inch from the left edge it will be two inches
form the edge, if I want it two inched from the edge it will end up
four inches from the edge), plus the image is not printed correctly.
It looks like the right half of the 1440x720 Micro image on the
test image I put up yesterday (http://home.rochester.rr.com/specht/test)
I only get one penguin, but part of it's legs are missing :-(

Other than that all modes are working in single/variable dot size and
both dithering modes.

Karl Heinz

--=20
Karl Heinz Kremer                                      kh...@kh...
                                                http://www.khk.net