Re: [Gimp-print-devel] How to use special Inks?

[regis r. <re...@re...>]

On 24-Feb-00 Robert L Krawitz wrote:

>    I have an EX printer (I have buy the same printer than the Master
>    (aka rlk)) (NB for rlk: now prints are Ok with 3.0.6 ... I don't
>    have anymore the previous problem and I can't explain it)
> I suggest upgrading to 3.0.8 or 3.1.0, or 3.0.9 (which should be out
> before the night is done).

Oups, I wanted to say that releases after 3.0.6 are working!
If you remember I had strange print-outs.
Now I use the 3.1.0 of course.

>              1.
>                  MIS Sixtone Inkset - 15%-LC, 25%-C, 45%-LM, 50%-Y, 75%-M,
100%-K
> 
> Whatever this means...

The cartridge contains gray inks with different values:
Ligth Cyan = gray 15%
Cyan = gray 25%
...
How to explain this to the driver?

> You're going to be on your own here; I suggest experimenting and
> giving us back settings that work well with these inks.  I realize
> they're expensive, but there's not a lot of choice.

Yes I known that I must do this but I don't known where I must enter the values?
If someone in the development team is interested by this I can send cartridges
too ;-)
For MIS color inks there is also problem because they are differents than
Epson inks. 


-- 
<regisr>       re...@re...     http://www.regix.com/