[Gimp-print-devel] Canon CP1300

[Stuart T R. <st...@st...>]

I have just obtained a Canon CP1300 to replace my CP900. I tested it 
thoroughly prior to connecting to my Tumbleweed system running 
Gutenprint 5.2.15. I have used CUPS to detect the printer and define it 
as a printer using the IPP option (wirelessly) and while it does print 
OK the issue I have is that I have not (yet) found a way to get my 
printouts borderless.

Initially I used Postcard as the paper size but this comes out with 
borders giving an image of about 87x136 mm, so I changed to a custom 
size defined as 100x148 mm and tried again, this time printing the image 
at 94x135 mm. If I print the image from Windows then the actual printed 
image is 100x152 mm the extra 4 mm allows the image to print over the 
perforations.

So my question is how can I get linux to print on the CP1300 using 
borderless as I can do when printing from Android, Windows or offline 
from an SD card? There does not seem to be an option for this in CUPS at 
least not that I've found.

Stuart

-- 
Website: https://www.stella-maris.org.uk
or:      https//www.broadstairs.org