Re: [Gimp-print-devel] Canon IP90 Pixma

[Che C. <che...@ha...>]

Hello fellow saffa 😀

Thanks a bunch will run this by my IT guy as I am really doff when it comes to these instructions 

Regards
Che

Sent on the go from my iPhone

> On 28 Jul 2019, at 18:20, Gernot Hassenpflug <aik...@gm...> wrote:
> 
> Hi Che,
> 
> I've just been advised that the latest version is actually 5.2.15 (not
> 5.2.15pre-1), so you can get that, but you'll need to obtain it
> directly from the file download folder here:
> https://sourceforge.net/projects/gimp-print/files/gutenprint-5.2/5.2.15/
> 
> Install the DMG file and then use your printing system's interface to
> set up a print queue, selecting the gutenprint .5.2.15 driver for the
> iP90
> 
> Best regards,
> Gernot Hassenpflug
> 
> On Mon, Jul 29, 2019 at 12:59 AM Gernot Hassenpflug
> <aik...@gm...> wrote:
>> 
>> On Sun, Jul 28, 2019 at 11:06 PM Che Coleman
>> <che...@ha...> wrote:
>>> I have a Canon IP90 and can’t download drivers as my IOS does not support the software. The IOS on my mac is Mojave and my husband’s  mac has Yosemite.
>> 
>> Hi Che,
>> Thanks for contacting us. Latest version of Gutenprint for MacOSX
>> works for any OSX from 10.6 upwards, so your two version are
>> supported.
>> 
>>> Is there a way you can assist as I had went to this link  http://gimp-print.sourceforge.net/MacOSX.phpa    and don’t really understand how it all works.
>> 
>> At
>> http://gimp-print.sourceforge.net/MacOSX.php
>> 
>> download the latest version 5.2.15-pre1 at present, and install the
>> DMG as you would any other MacOSX software.
>> This installs the gutenprint drivers.
>> Then you need to set up a printer queue in CUPS or whatever printing
>> system you use, selecting the appropriate gutenprint driver for your
>> printer during the setup.
>> The Canon iP90 should be supported as far as I am aware.
>> 
>> Best regards,
>> Gernot Hassenpflug
>> PS: A South African (Capetonian) in Tokyo