Re: [Gimp-print-devel] sony udr200 dye sub not Printing, stuck on transfer

[PhotoBooth b. <rol...@gm...>]

I tried installing 5.2.3, but during the installation I get an error
message that the software failed to install because no software was found?
I am running osx high sierra and it looks like 5.2.3 is for much older OSX?
Is the reason it is failing to install?

On Wed, Apr 10, 2019 at 4:30 AM PhotoBooth biz <rol...@gm...>
wrote:

> i could not get it to work so I copied the error log below.  If you are
> based in use, I can the printer to you and I"d gladly Pay for a fix.
>
> E [08/Apr/2019:16:38:57 -0700] [cups-deviced] PID 3107 (gutenprint52+usb)
> crashed on signal 6!
> E [08/Apr/2019:16:53:40 -0700] [Job 17] Stopping unresponsive job.
> E [08/Apr/2019:17:02:12 -0700] Scheduler shutting down due to program
> error.
> E [08/Apr/2019:20:07:53 -0700] [Job 18] Stopping unresponsive job.
> E [10/Apr/2019:04:24:45 -0700] [cups-deviced] PID 6069 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:25:00 -0700] [cups-deviced] PID 6081 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:25:56 -0700] [cups-deviced] PID 6108 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:26:11 -0700] [cups-deviced] PID 6120 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:26:26 -0700] [cups-deviced] PID 6131 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:26:41 -0700] [cups-deviced] PID 6143 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:26:56 -0700] [cups-deviced] PID 6152 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:27:12 -0700] [cups-deviced] PID 6160 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:27:27 -0700] [cups-deviced] PID 6169 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:27:42 -0700] [cups-deviced] PID 6177 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:27:57 -0700] [cups-deviced] PID 6188 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:28:13 -0700] [cups-deviced] PID 6196 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:28:28 -0700] [cups-deviced] PID 6205 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:28:43 -0700] [cups-deviced] PID 6213 (gutenprint52+usb)
> crashed on signal 6!
>
> On Tue, Apr 9, 2019 at 7:00 AM Matt Broughton <wal...@ma...>
> wrote:
>
>>
>>
>> On Apr 8, 2019, at 7:11 PM, PhotoBooth biz <rol...@gm...>
>> wrote:
>>
>> I am having issues trying to get a sony up-dr200 printer to work on a
>> 2010 mac book  2.4ghz with 8gb ram runningHigh Sierra
>> I have read the “hidden dyes printer” topic in the FAQ
>>
>> when I got to add the printer  in mac OSX.
>> under the 2nd column that says “kind” it says USB
>> but the instructions say it should say “sony up-dr200 - cups+gutenprint v
>> 5.2.14”
>>
>> at the bottom of the dialog it says use sony up-dr200 - cups+gutenprint v
>> 5.2.14
>>
>> so at least it is showing in one of the two areas. I also loaded u 5.2.15
>> pre release with same issue
>>
>> When I try to print the lcd on the front of the printer says
>> transferring, but then it never finishes. it’s like the printer  is not
>> getting a stop command.
>>
>> My first post so please go easy on me. I searched the archive and did not
>> see an obvious solution.
>> <Screen Shot 2019-04-08 at 4.38.47 PM.png>
>>
>>
>> There is a very serious bug in the Gutenprint 5.2.4 release for Mac.
>> There may also be a problem with the 5.2.15-pre1 release.  I hope you can
>> help test to see if you find the same bug.
>>
>> You are definitely on the right track in installing thed 5.2.15-pre1
>> release.  The printer needs to be set up a bit differently than you
>> currently have it.  Please Delete the current printer you have where all
>> you saw was USB.  Then you want to add the printer again.  This time you
>> should be able to add the printer with a connection of 'gutenprint52+usb'.
>> Then select the software as Sony U-DR200 - CUPS+Gutenprintv5.2.15-pre1.
>> Please post back to let us know if that works.
>>
>> If you still can't print, please go to the Console application:
>>  /Applications/Utilities/Console.  There is a column on the left side of
>> the window.  Please use the disclosure triangles on the left to find
>> /var/logs/cups.  The click on the error_log option.  Copy and paste
>> anything that begins with a capital 'E' and post back.  It may appear as:
>> E [31/Mar/2019:12:03:31 -0500] [cups-deviced] PID 1340 (gutenprint52+usb)
>> crashed on signal 6!
>>
>> If that is what you report, downgrading to Gutenprint 5.2.3 should work.
>> In any event, please post back to let us know if you re-add your printer
>> using gutenprint52+usb and get the message of an error ('E').  That would
>> greatly help the maintainer of the dye sublimation code fix the problem.
>>
>> --
>> Matt
>> wal...@ma...
>>
>>
>>
>> _______________________________________________
>> Gimp-print-devel mailing list
>> Gim...@li...
>> https://lists.sourceforge.net/lists/listinfo/gimp-print-devel
>>
>