Menu
▾
▴
gimp-print-devel
|
From: Solomon P. <pi...@sh...> - 2019-11-14 22:50:19
Attachments:
signature.asc
|
Matt/Steve, Would it be possible to spin me a new binary MacOS build based on current git code? I have a couple of users that are chomping at the bit to try some of the changes I've made since the 5.3.3 release. (They are _not_ using 10.15/Catalina, thankfully..) Thanks, - Solomon -- Solomon Peachy pizza at shaftnet dot org High Springs, FL ^^ (email/xmpp) ^^ Quidquid latine dictum sit, altum videtur. |
|
From: Robert K. <rl...@al...> - 2019-11-14 22:57:58
|
On Thu, 14 Nov 2019 17:50:07 -0500, Solomon Peachy wrote: > Would it be possible to spin me a new binary MacOS build based on > current git code? I have a couple of users that are chomping at the bit > to try some of the changes I've made since the 5.3.3 release. > > (They are _not_ using 10.15/Catalina, thankfully..) If you want a new release, let's do a proper 5.3.4. If it doesn't support Catalina for now, it doesn't support Catalina. -- Robert Krawitz <rl...@al...> *** MIT Engineers A Proud Tradition http://mitathletics.com *** Member of the League for Programming Freedom -- http://ProgFree.org Project lead for Gutenprint -- http://gimp-print.sourceforge.net "Linux doesn't dictate how I work, I dictate how Linux works." --Eric Crampton |
|
From: Steve L. <sle...@ya...> - 2019-11-15 01:14:07
|
Sounds good to me. Steve Letter Sent from my Commodore PET > On Nov 14, 2019, at 5:58 PM, Robert Krawitz <rl...@al...> wrote: > > On Thu, 14 Nov 2019 17:50:07 -0500, Solomon Peachy wrote: >> Would it be possible to spin me a new binary MacOS build based on >> current git code? I have a couple of users that are chomping at the bit >> to try some of the changes I've made since the 5.3.3 release. >> >> (They are _not_ using 10.15/Catalina, thankfully..) > > If you want a new release, let's do a proper 5.3.4. If it doesn't > support Catalina for now, it doesn't support Catalina. > -- > Robert Krawitz <rl...@al...> > > *** MIT Engineers A Proud Tradition http://mitathletics.com *** > Member of the League for Programming Freedom -- http://ProgFree.org > Project lead for Gutenprint -- http://gimp-print.sourceforge.net > > "Linux doesn't dictate how I work, I dictate how Linux works." > --Eric Crampton > > > _______________________________________________ > Gimp-print-devel mailing list > Gim...@li... > https://lists.sourceforge.net/lists/listinfo/gimp-print-devel |
|
From: Robert K. <rl...@al...> - 2019-11-24 03:02:11
|
On Thu, 14 Nov 2019 19:06:19 -0500, Steve Letter via Gimp-print-devel wrote: > Sounds good to me. Steve, Let me know when you can get to this and I'll cut a tarball. >> On Nov 14, 2019, at 5:58 PM, Robert Krawitz <rl...@al...> wrote: >> >> On Thu, 14 Nov 2019 17:50:07 -0500, Solomon Peachy wrote: >>> Would it be possible to spin me a new binary MacOS build based on >>> current git code? I have a couple of users that are chomping at the bit >>> to try some of the changes I've made since the 5.3.3 release. >>> >>> (They are _not_ using 10.15/Catalina, thankfully..) >> >> If you want a new release, let's do a proper 5.3.4. If it doesn't >> support Catalina for now, it doesn't support Catalina. -- Robert Krawitz <rl...@al...> *** MIT Engineers A Proud Tradition http://mitathletics.com *** Member of the League for Programming Freedom -- http://ProgFree.org Project lead for Gutenprint -- http://gimp-print.sourceforge.net "Linux doesn't dictate how I work, I dictate how Linux works." --Eric Crampton |
|
From: Steve L. <sle...@ya...> - 2019-11-15 00:09:13
|
Sure. I will try to do it this weekend. My dad is in the hospital getting a pacemaker and my mom is early stage dementia so I am quite busy right now. Steve Letter Sent from my Commodore PET > On Nov 14, 2019, at 5:50 PM, Solomon Peachy <pi...@sh...> wrote: > > Matt/Steve, > > Would it be possible to spin me a new binary MacOS build based on > current git code? I have a couple of users that are chomping at the bit > to try some of the changes I've made since the 5.3.3 release. > > (They are _not_ using 10.15/Catalina, thankfully..) > > Thanks, > > - Solomon > -- > Solomon Peachy pizza at shaftnet dot org > High Springs, FL ^^ (email/xmpp) ^^ > Quidquid latine dictum sit, altum videtur. > _______________________________________________ > Gimp-print-devel mailing list > Gim...@li... > https://lists.sourceforge.net/lists/listinfo/gimp-print-devel |
|
From: Solomon P. <pi...@sh...> - 2019-11-15 01:00:31
Attachments:
signature.asc
|
On Thu, Nov 14, 2019 at 07:05:36PM -0500, Steve Letter via Gimp-print-devel wrote: > Sure. I will try to do it this weekend. My dad is in the hospital > getting a pacemaker and my mom is early stage dementia so I am quite > busy right now. Yikes! Take care of your family, don't worry about this printer nonsense.. (I'm in the middle of some dental procedures and will be spending every weekend this month getting a neglected rental property readied for painting and sale..) - Solomon -- Solomon Peachy pizza at shaftnet dot org High Springs, FL ^^ (email/xmpp) ^^ Quidquid latine dictum sit, altum videtur. |
|
From: Robert K. <rl...@al...> - 2019-11-15 02:12:45
|
On Thu, 14 Nov 2019 20:00:18 -0500, Solomon Peachy wrote: > On Thu, Nov 14, 2019 at 07:05:36PM -0500, Steve Letter via Gimp-print-devel wrote: >> Sure. I will try to do it this weekend. My dad is in the hospital >> getting a pacemaker and my mom is early stage dementia so I am quite >> busy right now. > > Yikes! Take care of your family, don't worry about this printer > nonsense.. > > (I'm in the middle of some dental procedures and will be spending > every weekend this month getting a neglected rental property > readied for painting and sale..) I've made the basic changes for 5.3.4 (configure.ac, README, NEWS). Solomon and Gernot, could you please update the NEWS file, as all of the changes since 5.3.3 appear to be in the dyesub and Canon drivers. -- Robert Krawitz <rl...@al...> *** MIT Engineers A Proud Tradition http://mitathletics.com *** Member of the League for Programming Freedom -- http://ProgFree.org Project lead for Gutenprint -- http://gimp-print.sourceforge.net "Linux doesn't dictate how I work, I dictate how Linux works." --Eric Crampton |
|
From: Solomon P. <pi...@sh...> - 2019-11-15 02:42:22
Attachments:
signature.asc
|
On Thu, Nov 14, 2019 at 09:12:28PM -0500, Robert Krawitz wrote: > I've made the basic changes for 5.3.4 (configure.ac, README, NEWS). > Solomon and Gernot, could you please update the NEWS file, as all of > the changes since 5.3.3 appear to be in the dyesub and Canon drivers. I just committed the list of noteworthy dyesub changes. - Solomon -- Solomon Peachy pizza at shaftnet dot org High Springs, FL ^^ (email/xmpp) ^^ Quidquid latine dictum sit, altum videtur. |
|
From: Protea W. J. <aik...@gm...> - 2019-11-15 15:09:54
|
On Fri, Nov 15, 2019 at 11:13 AM Robert Krawitz <rl...@al...> wrote: /../ > I've made the basic changes for 5.3.4 (configure.ac, README, NEWS). > Solomon and Gernot, could you please update the NEWS file, as all of > the changes since 5.3.3 appear to be in the dyesub and Canon drivers. Got it. Nothing extra to commit, I checked the NEWS file had the latest information in it. Regards, Gernot Hassenpflug |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X