Menu
▾
▴
gimp-print-devel
|
From: Robert K. <rl...@al...> - 2019-06-16 21:05:00
|
Steve, Could you build a Mac installer from the latest snapshot build (https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download)? This is to get everything in order, and get any Mac stuff into the repository, prior to cutting a new 5.3 release (which I'm thinking of calling 5.3.3, just to get beyond the very low numbers). -- Robert Krawitz <rl...@al...> *** MIT Engineers A Proud Tradition http://mitathletics.com *** Member of the League for Programming Freedom -- http://ProgFree.org Project lead for Gutenprint -- http://gimp-print.sourceforge.net "Linux doesn't dictate how I work, I dictate how Linux works." --Eric Crampton |
|
From: Steve L. <sle...@ya...> - 2019-06-17 11:54:02
|
Monday’s are busy I’ll try tonight. If not tonight then I will tomorrow. BTW, the builds are a big improvement. Thanks. Steve Letter Sent from my Commodore PET > On Jun 16, 2019, at 5:04 PM, Robert Krawitz <rl...@al...> wrote: > > Steve, > > Could you build a Mac installer from the latest snapshot build > (https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download)? > This is to get everything in order, and get any Mac stuff into the > repository, prior to cutting a new 5.3 release (which I'm thinking of > calling 5.3.3, just to get beyond the very low numbers). > > -- > Robert Krawitz <rl...@al...> > > *** MIT Engineers A Proud Tradition http://mitathletics.com *** > Member of the League for Programming Freedom -- http://ProgFree.org > Project lead for Gutenprint -- http://gimp-print.sourceforge.net > > "Linux doesn't dictate how I work, I dictate how Linux works." > --Eric Crampton > > > _______________________________________________ > Gimp-print-devel mailing list > Gim...@li... > https://lists.sourceforge.net/lists/listinfo/gimp-print-devel |
|
From: Robert K. <rl...@al...> - 2019-06-18 01:58:21
|
On Mon, 17 Jun 2019 07:53:23 -0400, Steve Letter via Gimp-print-devel wrote: > Monday’s are busy I’ll try tonight. If not tonight then I will tomorrow. OK. > BTW, the builds are a big improvement. Thanks. Are you referring to 5.3, or any changes in 5.2 (there haven't been any changes to the 5.2 build procedure, and I'm more than happy to finally retire it!)? >> On Jun 16, 2019, at 5:04 PM, Robert Krawitz <rl...@al...> wrote: >> >> Steve, >> >> Could you build a Mac installer from the latest snapshot build >> (https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download)? >> This is to get everything in order, and get any Mac stuff into the >> repository, prior to cutting a new 5.3 release (which I'm thinking of >> calling 5.3.3, just to get beyond the very low numbers). -- Robert Krawitz <rl...@al...> *** MIT Engineers A Proud Tradition http://mitathletics.com *** Member of the League for Programming Freedom -- http://ProgFree.org Project lead for Gutenprint -- http://gimp-print.sourceforge.net "Linux doesn't dictate how I work, I dictate how Linux works." --Eric Crampton |
|
From: Steve L. <sle...@ya...> - 2019-06-22 02:07:52
|
I placed the build atGutenprint - Top Quality Printer Drivers Brought to you by: easysw,
|
|
| |
Gutenprint - Top Quality Printer Drivers ...
Your download will start shortly...
|
|
|
Wholly untested, and I need to do a couple of fixes (warnings).
Steve Letter You're never to old to learn something stupid. -- unknown
On Sunday, June 16, 2019, 5:05:21 PM EDT, Robert Krawitz <rl...@al...> wrote:
Steve,
Could you build a Mac installer from the latest snapshot build
(https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download)?
This is to get everything in order, and get any Mac stuff into the
repository, prior to cutting a new 5.3 release (which I'm thinking of
calling 5.3.3, just to get beyond the very low numbers).
--
Robert Krawitz <rl...@al...>
*** MIT Engineers A Proud Tradition http://mitathletics.com ***
Member of the League for Programming Freedom -- http://ProgFree.org
Project lead for Gutenprint -- http://gimp-print.sourceforge.net
"Linux doesn't dictate how I work, I dictate how Linux works."
--Eric Crampton
_______________________________________________
Gimp-print-devel mailing list
Gim...@li...
https://lists.sourceforge.net/lists/listinfo/gimp-print-devel
|
|
From: Robert K. <rl...@al...> - 2019-06-22 20:03:53
|
On Sat, 22 Jun 2019 02:07:43 +0000 (UTC), Steve Letter via Gimp-print-devel wrote: > I placed the build atGutenprint - Top Quality Printer Drivers Brought to you by: easysw, > > Wholly untested, and I need to do a couple of fixes (warnings). Excellent -- Matt etc., could you test it? Are your scripts (and any manual processes written up) in the repo? Once that's done, and the Mac build tested, I'd like to do a 5.3.3 release. -- Robert Krawitz <rl...@al...> *** MIT Engineers A Proud Tradition http://mitathletics.com *** Member of the League for Programming Freedom -- http://ProgFree.org Project lead for Gutenprint -- http://gimp-print.sourceforge.net "Linux doesn't dictate how I work, I dictate how Linux works." --Eric Crampton |
|
From: Steve L. <sle...@ya...> - 2019-06-22 22:10:01
|
And I really can’t give complete instructions, as I would need a clean system to retrace setting up a build system for gutenprint. So I am going to assume anyone attempting a build will be an experienced developer. I will state that in the instructions. Steve Letter Sent from my Commodore PET > On Jun 22, 2019, at 4:03 PM, Robert Krawitz <rl...@al...> wrote: > >> On Sat, 22 Jun 2019 02:07:43 +0000 (UTC), Steve Letter via Gimp-print-devel wrote: >> I placed the build atGutenprint - Top Quality Printer Drivers Brought to you by: easysw, >> >> Wholly untested, and I need to do a couple of fixes (warnings). > > Excellent -- Matt etc., could you test it? > > Are your scripts (and any manual processes written up) in the repo? > > Once that's done, and the Mac build tested, I'd like to do a 5.3.3 > release. > -- > Robert Krawitz <rl...@al...> > > *** MIT Engineers A Proud Tradition http://mitathletics.com *** > Member of the League for Programming Freedom -- http://ProgFree.org > Project lead for Gutenprint -- http://gimp-print.sourceforge.net > > "Linux doesn't dictate how I work, I dictate how Linux works." > --Eric Crampton |
|
From: Solomon P. <pi...@sh...> - 2019-06-23 00:39:26
Attachments:
signature.asc
|
On Sat, Jun 22, 2019 at 04:03:45PM -0400, Robert Krawitz wrote: > Excellent -- Matt etc., could you test it? I passed it on to someone trying to use it with a Sony UP-CR10L, and this is what they said: "Can’t get it to work. In Mac os i can’t select the driver after i installed the driver." I asked for more specifics. - Solomon -- Solomon Peachy pizza at shaftnet dot org High Springs, FL ^^ (email/xmpp) ^^ Quidquid latine dictum sit, altum videtur. |
|
From: Steve L. <sle...@ya...> - 2019-06-24 10:30:27
|
Yes, there is a big problem here. It looks like none of the gutenprint printer are showing up. Sorry, I need to investigate further. Steve Letter > On Jun 22, 2019, at 8:39 PM, Solomon Peachy <pi...@sh...> wrote: > >> On Sat, Jun 22, 2019 at 04:03:45PM -0400, Robert Krawitz wrote: >> Excellent -- Matt etc., could you test it? > > I passed it on to someone trying to use it with a Sony UP-CR10L, and > this is what they said: > > "Can’t get it to work. In Mac os i can’t select the driver after i > installed the driver." > > I asked for more specifics. > > - Solomon > -- > Solomon Peachy pizza at shaftnet dot org > High Springs, FL ^^ (email/xmpp) ^^ > Quidquid latine dictum sit, altum videtur. > _______________________________________________ > Gimp-print-devel mailing list > Gim...@li... > https://lists.sourceforge.net/lists/listinfo/gimp-print-devel |
|
From: Solomon P. <pi...@sh...> - 2019-06-24 12:24:50
Attachments:
signature.asc
|
On Mon, Jun 24, 2019 at 06:30:20AM -0400, Steve Letter via Gimp-print-devel wrote: > Yes, there is a big problem here. It looks like none of the > gutenprint printer are showing up. Sorry, I need to investigate > further. I got sent back some screenshots (in German) of what he was talking about, but it sounds like you don't need them. (I know the printer itself works, as he installed a Linux VM on his Mac and I was able to test it out that way...) - Solomon > > Steve Letter > > > On Jun 22, 2019, at 8:39 PM, Solomon Peachy <pi...@sh...> wrote: > > > >> On Sat, Jun 22, 2019 at 04:03:45PM -0400, Robert Krawitz wrote: > >> Excellent -- Matt etc., could you test it? > > > > I passed it on to someone trying to use it with a Sony UP-CR10L, and > > this is what they said: > > > > "Can’t get it to work. In Mac os i can’t select the driver after i > > installed the driver." > > > > I asked for more specifics. > > > > - Solomon > > -- > > Solomon Peachy pizza at shaftnet dot org > > High Springs, FL ^^ (email/xmpp) ^^ > > Quidquid latine dictum sit, altum videtur. > > _______________________________________________ > > Gimp-print-devel mailing list > > Gim...@li... > > https://lists.sourceforge.net/lists/listinfo/gimp-print-devel > _______________________________________________ > Gimp-print-devel mailing list > Gim...@li... > https://lists.sourceforge.net/lists/listinfo/gimp-print-devel -- Solomon Peachy pizza at shaftnet dot org High Springs, FL ^^ (email/xmpp) ^^ Quidquid latine dictum sit, altum videtur. |
|
From: Robert K. <rl...@al...> - 2019-06-24 12:28:35
|
On Mon, 24 Jun 2019 08:24:46 -0400, Solomon Peachy wrote: > On Mon, Jun 24, 2019 at 06:30:20AM -0400, Steve Letter via Gimp-print-devel wrote: >> Yes, there is a big problem here. It looks like none of the >> gutenprint printer are showing up. Sorry, I need to investigate >> further. > > I got sent back some screenshots (in German) of what he was talking > about, but it sounds like you don't need them. > > (I know the printer itself works, as he installed a Linux VM on his Mac > and I was able to test it out that way...) Is this with 5.2 or the 5.3 snapshot? >> > On Jun 22, 2019, at 8:39 PM, Solomon Peachy <pi...@sh...> wrote: >> > >> >> On Sat, Jun 22, 2019 at 04:03:45PM -0400, Robert Krawitz wrote: >> >> Excellent -- Matt etc., could you test it? >> > >> > I passed it on to someone trying to use it with a Sony UP-CR10L, and >> > this is what they said: >> > >> > "Can't get it to work. In Mac os i can't select the driver after i >> > installed the driver." >> > >> > I asked for more specifics. -- Robert Krawitz <rl...@al...> *** MIT Engineers A Proud Tradition http://mitathletics.com *** Member of the League for Programming Freedom -- http://ProgFree.org Project lead for Gutenprint -- http://gimp-print.sourceforge.net "Linux doesn't dictate how I work, I dictate how Linux works." --Eric Crampton |
|
From: Solomon P. <pi...@sh...> - 2019-06-24 12:38:00
Attachments:
signature.asc
|
On Mon, Jun 24, 2019 at 08:28:29AM -0400, Robert Krawitz wrote: > > (I know the printer itself works, as he installed a Linux VM on his Mac > > and I was able to test it out that way...) > > Is this with 5.2 or the 5.3 snapshot? The user had this problem with the 5.3 snapshot that Steve just uploaded. As for my VM-based testing, at the time I was working witn unreleased backend code so get the kinks worked out. For source data I used both a windows-generated spool file and later one generated by a 5.3 snapshot. This was back in the early April timeframe, and all code has since been committed. - Solomon -- Solomon Peachy pizza at shaftnet dot org High Springs, FL ^^ (email/xmpp) ^^ Quidquid latine dictum sit, altum videtur. |
|
From: Matthew B. <mab...@fa...> - 2019-06-24 14:03:48
|
> On Jun 21, 2019, at 9:07 PM, Steve Letter via Gimp-print-devel <gim...@li...> wrote: > > I placed the build at > Gutenprint - Top Quality Printer Drivers Brought to you by: easysw, <https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1.dmg/download> > > Gutenprint - Top Quality Printer Drivers ... > Your download will start shortly... > <https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1.dmg/download> > > Wholly untested, and I need to do a couple of fixes (warnings). > > > Steve Letter You're never to old to learn something stupid. -- unknown > > > On Sunday, June 16, 2019, 5:05:21 PM EDT, Robert Krawitz <rl...@al...> wrote: > > > Steve, > > Could you build a Mac installer from the latest snapshot build > (https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download <https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download>)? > This is to get everything in order, and get any Mac stuff into the > repository, prior to cutting a new 5.3 release (which I'm thinking of > calling 5.3.3, just to get beyond the very low numbers). > > -- > Robert Krawitz <rl...@al... <mailto:rl...@al...>> I'm sorry that I haven't been able to get to this until now. A couple of quick observations before I even install to see what's what. The gutenprint52+usb is not included in the package. Is that going to be changed to gutenprint53+usb? That may bring a whole other set of problems. Additionally, the Mac installer is showing the files /MacOS/lib/gutenprint/5.3 has the files (leading spaces) config summary, libgutenprint.9.dylib, and the symlink libgutenprint.dylib The configuration summary is really not a problem. I looked at it and it is a 'rw' file containing the output of ./configure. Is libgutenprint.9.dylib correct? It has been libgutennprint.2.dylib a long time. Gutenprint Configuration Summary: ---------- ------------- -------- If you have any problems, please report the information below to gim...@li... ================================================================ Release: gutenprint 5.3.2-pre1-2019-06-16T01-00-e55733ff generated on 16 Jun 2019 Generated at Fri Jun 21 22:00:01 EDT 2019 by sletter Features: Build CUPS: yes, installing in /Library/Printers/Gutenprint.printerDriver/Contents/MacOS Build CUPS 1.2 enhancements: yes Build CUPS PPD files: no Generate PS level 3 CUPS PPD files: yes Build genppd statically: yes Build CUPS dyesub USB backend: yes Build EPSON inkjet utility: yes Build enhanced Print plugin for GIMP: no Build test programs: no Build testpattern generator: no Installation summary: Installation prefix: /Library/Printers/Gutenprint.printerDriver/Contents/MacOS Exec prefix: /Library/Printers/Gutenprint.printerDriver/Contents/MacOS (${prefix}) Data directory: /Library/Printers/Gutenprint.printerDriver/Contents/Resources/gutenprint Library directory: /Library/Printers/Gutenprint.printerDriver/Contents/MacOS/lib/gutenprint (/Library/Printers/Gutenprint.printerDriver/Contents/MacOS/lib/gutenprint) Executable directory: /Library/Printers/Gutenprint.printerDriver/Contents/MacOS/bin (/Library/Printers/Gutenprint.printerDriver/Contents/MacOS/bin) XML data directory: /Library/Printers/Gutenprint.printerDriver/Contents/Resources/gutenprint/5.3/xml Module directory: /Library/Printers/Gutenprint.printerDriver/Contents/MacOS/lib/gutenprint/5.3/modules (/Library/Printers/Gutenprint.printerDriver/Contents/MacOS/lib/gutenprint/5.3/modules) Install sample images: no General configuration: Configure arguments: --prefix=/Library/Printers/Gutenprint.printerDriver/Contents/MacOS --datadir=/Library/Printers/Gutenprint.printerDriver/Contents/Resources --datarootdir=/Library/Printers/Gutenprint.printerDriver/Contents/Resources --localedir=/Library/Printers/Gutenprint.printerDriver/Contents/Resources --docdir=/Library/Printers/Gutenprint.printerDriver/Contents/Resources/doc --mandir=/Library/Printers/Gutenprint.printerDriver/Contents/Resources --disable-samples --disable-test --enable-nls-macosx '--with-archflags=-mmacosx-version-min=10.6 -Os -arch x86_64 -D_PPD_DEPRECATED=""' Compiler: gcc Compiler Version: Apple LLVM version 9.1.0 (clang-902.0.39.1) Compiler options: -Disfinite=finite -O3 -mmacosx-version-min=10.6 -Os -arch x86_64 -D_PPD_DEPRECATED="" -Wformat -Werror=format-security -Wmissing-prototypes Build static libraries: yes Build shared libraries: yes Maintainer mode: no Use i18n: no Generate profiling information: no Generate debugging symbols: no Use modules: static Use readline libraries: yes, extra arguments: -lncurses uname -a output: Darwin Stephens-MacBook-Pro.local 17.5.0 Darwin Kernel Version 17.5.0: Fri Apr 13 19:32:32 PDT 2018; root:xnu-4570.51.2~1/RELEASE_X86_64 x86_64 ================================================================ VERY IMPORTANT: If you expect to build the CUPS driver or the enhanced Print plugin for GIMP, but the output above indicates that that component will not be built, it almost certainly indicates that development packages required to build that component are not installed on your system. Please read the README file and install the necessary development packages before reporting any error to the development team. Depending upon your operating system version, you may have to install packages from the installation medium or over the network. Matt |
|
From: Solomon P. <pi...@sh...> - 2019-06-24 14:23:48
Attachments:
signature.asc
|
On Mon, Jun 24, 2019 at 08:45:04AM -0500, Matthew Broughton wrote: > I'm sorry that I haven't been able to get to this until now. A couple > of quick observations before I even install to see what's what. The > gutenprint52+usb is not included in the package. Is that going to be > changed to gutenprint53+usb? That may bring a whole other set of > problems. The backend name changed, yes. I can't comment on the rest though... - Solomon -- Solomon Peachy pizza at shaftnet dot org High Springs, FL ^^ (email/xmpp) ^^ Quidquid latine dictum sit, altum videtur. |
|
From: Matt B. <wal...@ma...> - 2019-06-24 14:30:02
|
> On Jun 24, 2019, at 9:23 AM, Solomon Peachy <pi...@sh...> wrote: > > On Mon, Jun 24, 2019 at 08:45:04AM -0500, Matthew Broughton wrote: >> I'm sorry that I haven't been able to get to this until now. A couple >> of quick observations before I even install to see what's what. The >> gutenprint52+usb is not included in the package. Is that going to be >> changed to gutenprint53+usb? That may bring a whole other set of >> problems. > > The backend name changed, yes. > > I can't comment on the rest though... > > - Solomon Regardless of the name, the backend was not included. I can no also confirm, that I cannot generate a PPD/printer through the macos Printer & Scan interface. Matt |
|
From: Matt B. <wal...@ma...> - 2019-06-24 18:05:39
|
> On Jun 24, 2019, at 8:45 AM, Matthew Broughton <mab...@fa...> wrote: > >> >> Could you build a Mac installer from the latest snapshot build >> (https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download <https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download>)? >> This is to get everything in order, and get any Mac stuff into the >> repository, prior to cutting a new 5.3 release (which I'm thinking of >> calling 5.3.3, just to get beyond the very low numbers). >> >> -- >> Robert Krawitz <rl...@al... <mailto:rl...@al...>> > > I'm sorry that I haven't been able to get to this until now. A couple of quick observations before I even install to see what's what. The gutenprint52+usb is not included in the package. Is that going to be changed to gutenprint53+usb? That may bring a whole other set of problems. > > Additionally, the Mac installer is showing the files /MacOS/lib/gutenprint/5.3 has the files (leading spaces) config summary, libgutenprint.9.dylib, and the symlink libgutenprint.dylib The configuration summary is really not a problem. I looked at it and it is a 'rw' file containing the output of ./configure. Is libgutenprint.9.dylib correct? It has been libgutennprint.2.dylib a long time Was the driver supposed to be eliminated? That was used in the past as part of generating the PPDS I believe. That file is also missing. matt$ ls -l /usr/libexec/cups/driver/gutenprint.5.2 lrwxr-xr-x 1 root wheel 72 Jun 24 09:22 /usr/libexec/cups/driver/gutenprint.5.2 -> /Library/Printers/Gutenprint.printerDriver/Contents/MacOS/gutenprint.5.2 Matt |
|
From: Steve L. <sle...@ya...> - 2019-06-25 01:51:49
|
Matt, Thanks for the help. Everyone, I pulled the install down until I get everything straightened out. I may have questions. Steve Letter > On Jun 24, 2019, at 2:05 PM, Matt Broughton <wal...@ma...> wrote: > > > >>> On Jun 24, 2019, at 8:45 AM, Matthew Broughton <mab...@fa...> wrote: >>> >>> >>> Could you build a Mac installer from the latest snapshot build >>> (https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download)? >>> This is to get everything in order, and get any Mac stuff into the >>> repository, prior to cutting a new 5.3 release (which I'm thinking of >>> calling 5.3.3, just to get beyond the very low numbers). >>> >>> -- >>> Robert Krawitz <rl...@al...> >> >> I'm sorry that I haven't been able to get to this until now. A couple of quick observations before I even install to see what's what. The gutenprint52+usb is not included in the package. Is that going to be changed to gutenprint53+usb? That may bring a whole other set of problems. >> >> Additionally, the Mac installer is showing the files /MacOS/lib/gutenprint/5.3 has the files (leading spaces) config summary, libgutenprint.9.dylib, and the symlink libgutenprint.dylib The configuration summary is really not a problem. I looked at it and it is a 'rw' file containing the output of ./configure. Is libgutenprint.9.dylib correct? It has been libgutennprint.2.dylib a long time > > > Was the driver supposed to be eliminated? That was used in the past as part of generating the PPDS I believe. That file is also missing. > > matt$ ls -l /usr/libexec/cups/driver/gutenprint.5.2 > lrwxr-xr-x 1 root wheel 72 Jun 24 09:22 /usr/libexec/cups/driver/gutenprint.5.2 -> /Library/Printers/Gutenprint.printerDriver/Contents/MacOS/gutenprint.5.2 > > Matt > > _______________________________________________ > Gimp-print-devel mailing list > Gim...@li... > https://lists.sourceforge.net/lists/listinfo/gimp-print-devel |
|
From: Matt B. <wal...@ma...> - 2019-06-25 01:59:20
|
> On Jun 24, 2019, at 8:51 PM, Steve Letter via Gimp-print-devel <gim...@li...> wrote: > > Matt, > > Thanks for the help. > > Everyone, I pulled the install down until I get everything straightened out. I may have questions. > > Steve Letter > > On Jun 24, 2019, at 2:05 PM, Matt Broughton <wal...@ma... <mailto:wal...@ma...>> wrote: > >> >> >>> On Jun 24, 2019, at 8:45 AM, Matthew Broughton <mab...@fa... <mailto:mab...@fa...>> wrote: >>> >>>> >>>> Could you build a Mac installer from the latest snapshot build >>>> (https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download <https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download>)? >>>> This is to get everything in order, and get any Mac stuff into the >>>> repository, prior to cutting a new 5.3 release (which I'm thinking of >>>> calling 5.3.3, just to get beyond the very low numbers). >>>> >>>> -- >>>> Robert Krawitz <rl...@al... <mailto:rl...@al...>> >>> >>> I'm sorry that I haven't been able to get to this until now. A couple of quick observations before I even install to see what's what. The gutenprint52+usb is not included in the package. Is that going to be changed to gutenprint53+usb? That may bring a whole other set of problems. >>> >>> Additionally, the Mac installer is showing the files /MacOS/lib/gutenprint/5.3 has the files (leading spaces) config summary, libgutenprint.9.dylib, and the symlink libgutenprint.dylib The configuration summary is really not a problem. I looked at it and it is a 'rw' file containing the output of ./configure. Is libgutenprint.9.dylib correct? It has been libgutennprint.2.dylib a long time >> >> >> Was the driver supposed to be eliminated? That was used in the past as part of generating the PPDS I believe. That file is also missing. >> >> matt$ ls -l /usr/libexec/cups/driver/gutenprint.5.2 >> lrwxr-xr-x 1 root wheel 72 Jun 24 09:22 /usr/libexec/cups/driver/gutenprint.5.2 -> /Library/Printers/Gutenprint.printerDriver/Contents/MacOS/gutenprint.5.2 >> >> Matt I did a quick down and dirty compile on my machine. I didn't have libusb installed so I didn't get our backend. I also didn't use any arguments for ./configure. Everything built smoothly. I then did a DESTDIR install and it looks like everything is there. I'll try a more customized build using the configure arguments used back in January 2016. It won't be signed, but it may be OK for testing. Matt |
|
From: Matt B. <wal...@ma...> - 2019-06-25 03:53:59
|
> On Jun 24, 2019, at 8:59 PM, Matt Broughton <wal...@ma...> wrote: > > > >> On Jun 24, 2019, at 8:51 PM, Steve Letter via Gimp-print-devel <gim...@li... <mailto:gim...@li...>> wrote: >> >> Matt, >> >> Thanks for the help. >> >> Everyone, I pulled the install down until I get everything straightened out. I may have questions. >> >> Steve Letter >> >> On Jun 24, 2019, at 2:05 PM, Matt Broughton <wal...@ma... <mailto:wal...@ma...>> wrote: >> >>> >>> >>>> On Jun 24, 2019, at 8:45 AM, Matthew Broughton <mab...@fa... <mailto:mab...@fa...>> wrote: >>>> >>>>> >>>>> Could you build a Mac installer from the latest snapshot build >>>>> (https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download <https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download>)? >>>>> This is to get everything in order, and get any Mac stuff into the >>>>> repository, prior to cutting a new 5.3 release (which I'm thinking of >>>>> calling 5.3.3, just to get beyond the very low numbers). >>>>> >>>>> -- >>>>> Robert Krawitz <rl...@al... <mailto:rl...@al...>> >>>> >>>> I'm sorry that I haven't been able to get to this until now. A couple of quick observations before I even install to see what's what. The gutenprint52+usb is not included in the package. Is that going to be changed to gutenprint53+usb? That may bring a whole other set of problems. >>>> >>>> Additionally, the Mac installer is showing the files /MacOS/lib/gutenprint/5.3 has the files (leading spaces) config summary, libgutenprint.9.dylib, and the symlink libgutenprint.dylib The configuration summary is really not a problem. I looked at it and it is a 'rw' file containing the output of ./configure. Is libgutenprint.9.dylib correct? It has been libgutennprint.2.dylib a long time >>> >>> >>> Was the driver supposed to be eliminated? That was used in the past as part of generating the PPDS I believe. That file is also missing. >>> >>> matt$ ls -l /usr/libexec/cups/driver/gutenprint.5.2 >>> lrwxr-xr-x 1 root wheel 72 Jun 24 09:22 /usr/libexec/cups/driver/gutenprint.5.2 -> /Library/Printers/Gutenprint.printerDriver/Contents/MacOS/gutenprint.5.2 >>> >>> Matt > > > > I did a quick down and dirty compile on my machine. I didn't have libusb installed so I didn't get our backend. I also didn't use any arguments for ./configure. Everything built smoothly. I then did a DESTDIR install and it looks like everything is there. I'll try a more customized build using the configure arguments used back in January 2016. It won't be signed, but it may be OK for testing. > > Matt I am having some problems with pkgbuild tonight. I am pretty sure everything got built, I just couldn't package it. I will hopefully have a chance to look at it tomorrow. Matt |
|
From: Robert K. <rl...@al...> - 2019-07-06 15:43:20
|
On Mon, 24 Jun 2019 21:51:37 -0400, Steve Letter via Gimp-print-devel wrote: > Matt, > > Thanks for the help. > > Everyone, I pulled the install down until I get everything straightened out. I may have questions. Steve, how is it progressing? >> On Jun 24, 2019, at 2:05 PM, Matt Broughton <wal...@ma...> wrote: >> >> >> >>>> On Jun 24, 2019, at 8:45 AM, Matthew Broughton <mab...@fa...> wrote: >>>> >>>> >>>> Could you build a Mac installer from the latest snapshot build >>>> (https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download)? >>>> This is to get everything in order, and get any Mac stuff into the >>>> repository, prior to cutting a new 5.3 release (which I'm thinking of >>>> calling 5.3.3, just to get beyond the very low numbers). >>>> >>>> -- >>>> Robert Krawitz <rl...@al...> >>> >>> I'm sorry that I haven't been able to get to this until now. A couple of quick observations before I even install to see what's what. The gutenprint52+usb is not included in the package. Is that going to be changed to gutenprint53+usb? That may bring a whole other set of problems. >>> >>> Additionally, the Mac installer is showing the files /MacOS/lib/gutenprint/5.3 has the files (leading spaces) config summary, libgutenprint.9.dylib, and the symlink libgutenprint.dylib The configuration summary is really not a problem. I looked at it and it is a 'rw' file containing the output of ./configure. Is libgutenprint.9.dylib correct? It has been libgutennprint.2.dylib a long time >> >> >> Was the driver supposed to be eliminated? That was used in the past as part of generating the PPDS I believe. That file is also missing. >> >> matt$ ls -l /usr/libexec/cups/driver/gutenprint.5.2 >> lrwxr-xr-x 1 root wheel 72 Jun 24 09:22 /usr/libexec/cups/driver/gutenprint.5.2 -> /Library/Printers/Gutenprint.printerDriver/Contents/MacOS/gutenprint.5.2 -- Robert Krawitz <rl...@al...> *** MIT Engineers A Proud Tradition http://mitathletics.com *** Member of the League for Programming Freedom -- http://ProgFree.org Project lead for Gutenprint -- http://gimp-print.sourceforge.net "Linux doesn't dictate how I work, I dictate how Linux works." --Eric Crampton |
|
From: Steve L. <sle...@ya...> - 2019-07-16 02:05:21
|
All, I still don't have 100% confidence, I know I still have parts of the build to look at. (libgutenprint.9.dylib for example) However, I was able to print with the build I put up here:
gutenprint-5.3.2-pre1.dmg
|
|
| |
Gutenprint - Top Quality Printer Drivers ...
Your download will start shortly...
|
|
|
My printer is technically not a supported printer so I need more folks to test that it is operating properly. In tech terms, my build is still a bit wonky.
Steve Letter
On Monday, June 24, 2019, 9:45:09 AM EDT, Matthew Broughton <mab...@fa...> wrote:
On Jun 21, 2019, at 9:07 PM, Steve Letter via Gimp-print-devel <gim...@li...> wrote:
I placed the build atGutenprint - Top Quality Printer Drivers Brought to you by: easysw,
|
|
| |
Gutenprint - Top Quality Printer Drivers ...
Your download will start shortly... |
|
|
Wholly untested, and I need to do a couple of fixes (warnings).
Steve Letter You're never to old to learn something stupid. -- unknown
On Sunday, June 16, 2019, 5:05:21 PM EDT, Robert Krawitz <rl...@al...> wrote:
Steve,
Could you build a Mac installer from the latest snapshot build
(https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download)?
This is to get everything in order, and get any Mac stuff into the
repository, prior to cutting a new 5.3 release (which I'm thinking of
calling 5.3.3, just to get beyond the very low numbers).
--
Robert Krawitz <rl...@al...>
I'm sorry that I haven't been able to get to this until now. A couple of quick observations before I even install to see what's what. The gutenprint52+usb is not included in the package. Is that going to be changed to gutenprint53+usb? That may bring a whole other set of problems.
Additionally, the Mac installer is showing the files /MacOS/lib/gutenprint/5.3 has the files (leading spaces) config summary, libgutenprint.9.dylib, and the symlink libgutenprint.dylib The configuration summary is really not a problem. I looked at it and it is a 'rw' file containing the output of ./configure. Is libgutenprint.9.dylib correct? It has been libgutennprint.2.dylib a long time.
Gutenprint Configuration Summary:---------- ------------- --------
If you have any problems, please report the information below tog...@li...
================================================================ Release: gutenprint 5.3.2-pre1-2019-06-16T01-00-e55733ff generated on 16 Jun 2019 Generated at Fri Jun 21 22:00:01 EDT 2019 by sletter
Features: Build CUPS: yes, installing in /Library/Printers/Gutenprint.printerDriver/Contents/MacOS Build CUPS 1.2 enhancements: yes Build CUPS PPD files: no Generate PS level 3 CUPS PPD files: yes Build genppd statically: yes Build CUPS dyesub USB backend: yes Build EPSON inkjet utility: yes Build enhanced Print plugin for GIMP: no Build test programs: no Build testpattern generator: no
Installation summary: Installation prefix: /Library/Printers/Gutenprint.printerDriver/Contents/MacOS Exec prefix: /Library/Printers/Gutenprint.printerDriver/Contents/MacOS (${prefix}) Data directory: /Library/Printers/Gutenprint.printerDriver/Contents/Resources/gutenprint Library directory: /Library/Printers/Gutenprint.printerDriver/Contents/MacOS/lib/gutenprint (/Library/Printers/Gutenprint.printerDriver/Contents/MacOS/lib/gutenprint) Executable directory: /Library/Printers/Gutenprint.printerDriver/Contents/MacOS/bin (/Library/Printers/Gutenprint.printerDriver/Contents/MacOS/bin) XML data directory: /Library/Printers/Gutenprint.printerDriver/Contents/Resources/gutenprint/5.3/xml Module directory: /Library/Printers/Gutenprint.printerDriver/Contents/MacOS/lib/gutenprint/5.3/modules (/Library/Printers/Gutenprint.printerDriver/Contents/MacOS/lib/gutenprint/5.3/modules) Install sample images: no
General configuration: Configure arguments: --prefix=/Library/Printers/Gutenprint.printerDriver/Contents/MacOS --datadir=/Library/Printers/Gutenprint.printerDriver/Contents/Resources --datarootdir=/Library/Printers/Gutenprint.printerDriver/Contents/Resources --localedir=/Library/Printers/Gutenprint.printerDriver/Contents/Resources --docdir=/Library/Printers/Gutenprint.printerDriver/Contents/Resources/doc --mandir=/Library/Printers/Gutenprint.printerDriver/Contents/Resources --disable-samples --disable-test --enable-nls-macosx '--with-archflags=-mmacosx-version-min=10.6 -Os -arch x86_64 -D_PPD_DEPRECATED=""' Compiler: gcc Compiler Version: Apple LLVM version 9.1.0 (clang-902.0.39.1) Compiler options: -Disfinite=finite -O3 -mmacosx-version-min=10.6 -Os -arch x86_64 -D_PPD_DEPRECATED="" -Wformat -Werror=format-security -Wmissing-prototypes Build static libraries: yes Build shared libraries: yes Maintainer mode: no Use i18n: no Generate profiling information: no Generate debugging symbols: no Use modules: static Use readline libraries: yes, extra arguments: -lncurses uname -a output: Darwin Stephens-MacBook-Pro.local 17.5.0 Darwin Kernel Version 17.5.0: Fri Apr 13 19:32:32 PDT 2018; root:xnu-4570.51.2~1/RELEASE_X86_64 x86_64================================================================
VERY IMPORTANT:If you expect to build the CUPS driver or the enhanced Print plugin forGIMP, but the output above indicates that that component will not be built,it almost certainly indicates that development packages required to buildthat component are not installed on your system. Please read the READMEfile and install the necessary development packages before reporting anyerror to the development team. Depending upon your operating system version,you may have to install packages from the installation medium or overthe network.
Matt
|
|
From: Matt B. <wal...@ma...> - 2019-07-16 11:34:08
|
I’m not available for most of the week. I’ll take a look at it when I get home. Matt Sent from my iPad > On Jul 15, 2019, at 9:05 PM, Steve Letter <sle...@ya...> wrote: > > All, I still don't have 100% confidence, I know I still have parts of the build to look at. (libgutenprint.9.dylib for example) However, I was able to print with the build I put up here: > > gutenprint-5.3.2-pre1.dmg > > Gutenprint - Top Quality Printer Drivers ... > Your download will start shortly... > > My printer is technically not a supported printer so I need more folks to test that it is operating properly. In tech terms, my build is still a bit wonky. > > Steve Letter > > > On Monday, June 24, 2019, 9:45:09 AM EDT, Matthew Broughton <mab...@fa...> wrote: > > > > >> On Jun 21, 2019, at 9:07 PM, Steve Letter via Gimp-print-devel <gim...@li...> wrote: >> >> I placed the build at >> Gutenprint - Top Quality Printer Drivers Brought to you by: easysw, >> >> Gutenprint - Top Quality Printer Drivers ... >> Your download will start shortly... >> >> Wholly untested, and I need to do a couple of fixes (warnings). >> >> >> Steve Letter You're never to old to learn something stupid. -- unknown >> >> >> On Sunday, June 16, 2019, 5:05:21 PM EDT, Robert Krawitz <rl...@al...> wrote: >> >> >> Steve, >> >> Could you build a Mac installer from the latest snapshot build >> (https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1-2019-06-16T01-00-e55733ff.tar.xz/download)? >> This is to get everything in order, and get any Mac stuff into the >> repository, prior to cutting a new 5.3 release (which I'm thinking of >> calling 5.3.3, just to get beyond the very low numbers). >> >> -- >> Robert Krawitz <rl...@al... >> > > > I'm sorry that I haven't been able to get to this until now. A couple of quick observations before I even install to see what's what. The gutenprint52+usb is not included in the package. Is that going to be changed to gutenprint53+usb? That may bring a whole other set of problems. > > Additionally, the Mac installer is showing the files /MacOS/lib/gutenprint/5.3 has the files (leading spaces) config summary, libgutenprint.9.dylib, and the symlink libgutenprint.dylib The configuration summary is really not a problem. I looked at it and it is a 'rw' file containing the output of ./configure. Is libgutenprint.9.dylib correct? It has been libgutennprint.2.dylib a long time. > > > Gutenprint Configuration Summary: > ---------- ------------- -------- > > If you have any problems, please report the information below to > gim...@li... > > ================================================================ > Release: gutenprint 5.3.2-pre1-2019-06-16T01-00-e55733ff generated on 16 Jun 2019 > Generated at Fri Jun 21 22:00:01 EDT 2019 by sletter > > Features: > Build CUPS: yes, installing in /Library/Printers/Gutenprint.printerDriver/Contents/MacOS > Build CUPS 1.2 enhancements: yes > Build CUPS PPD files: no > Generate PS level 3 CUPS PPD files: yes > Build genppd statically: yes > Build CUPS dyesub USB backend: yes > Build EPSON inkjet utility: yes > Build enhanced Print plugin for GIMP: no > Build test programs: no > Build testpattern generator: no > > Installation summary: > Installation prefix: /Library/Printers/Gutenprint.printerDriver/Contents/MacOS > Exec prefix: /Library/Printers/Gutenprint.printerDriver/Contents/MacOS (${prefix}) > Data directory: /Library/Printers/Gutenprint.printerDriver/Contents/Resources/gutenprint > Library directory: /Library/Printers/Gutenprint.printerDriver/Contents/MacOS/lib/gutenprint (/Library/Printers/Gutenprint.printerDriver/Contents/MacOS/lib/gutenprint) > Executable directory: /Library/Printers/Gutenprint.printerDriver/Contents/MacOS/bin (/Library/Printers/Gutenprint.printerDriver/Contents/MacOS/bin) > XML data directory: /Library/Printers/Gutenprint.printerDriver/Contents/Resources/gutenprint/5.3/xml > Module directory: /Library/Printers/Gutenprint.printerDriver/Contents/MacOS/lib/gutenprint/5.3/modules (/Library/Printers/Gutenprint.printerDriver/Contents/MacOS/lib/gutenprint/5.3/modules) > Install sample images: no > > General configuration: > Configure arguments: --prefix=/Library/Printers/Gutenprint.printerDriver/Contents/MacOS --datadir=/Library/Printers/Gutenprint.printerDriver/Contents/Resources --datarootdir=/Library/Printers/Gutenprint.printerDriver/Contents/Resources --localedir=/Library/Printers/Gutenprint.printerDriver/Contents/Resources --docdir=/Library/Printers/Gutenprint.printerDriver/Contents/Resources/doc --mandir=/Library/Printers/Gutenprint.printerDriver/Contents/Resources --disable-samples --disable-test --enable-nls-macosx '--with-archflags=-mmacosx-version-min=10.6 -Os -arch x86_64 -D_PPD_DEPRECATED=""' > Compiler: gcc > Compiler Version: Apple LLVM version 9.1.0 (clang-902.0.39.1) > Compiler options: -Disfinite=finite -O3 -mmacosx-version-min=10.6 -Os -arch x86_64 -D_PPD_DEPRECATED="" -Wformat -Werror=format-security -Wmissing-prototypes > Build static libraries: yes > Build shared libraries: yes > Maintainer mode: no > Use i18n: no > Generate profiling information: no > Generate debugging symbols: no > Use modules: static > Use readline libraries: yes, extra arguments: -lncurses > uname -a output: Darwin Stephens-MacBook-Pro.local 17.5.0 Darwin Kernel Version 17.5.0: Fri Apr 13 19:32:32 PDT 2018; root:xnu-4570.51.2~1/RELEASE_X86_64 x86_64 > ================================================================ > > VERY IMPORTANT: > If you expect to build the CUPS driver or the enhanced Print plugin for > GIMP, but the output above indicates that that component will not be built, > it almost certainly indicates that development packages required to build > that component are not installed on your system. Please read the README > file and install the necessary development packages before reporting any > error to the development team. Depending upon your operating system version, > you may have to install packages from the installation medium or over > the network. > > Matt > |
|
From: Robert K. <rl...@al...> - 2019-08-16 12:32:24
|
On Sat, 27 Jul 2019 19:49:21 -0500, Matthew Broughton wrote: >> On Jul 27, 2019, at 7:41 PM, Matthew Broughton <mab...@fa...> wrote: >> >>> On Jul 27, 2019, at 4:03 PM, Steve Letter <sle...@ya... <mailto:sle...@ya...>> wrote: >>> >>> I'd like to build something current first. Give me a few more days and let me see what I can do. >>> >>> Matt, did you want me to update your uninstall or would you rather do it? >>> >>> Steve Letter >> >> I've made the necessary changes to the uninstaller and tested it. I'll send it to you after I check the preinstall script. There was a lot in there that was the same as the uninstaller. >> >> Matt > > The preinstall script is fine. It uses `grep` rather than having specific file names when removing symlinks. I'll send the updated uninstaller to you as a compressed file. Let me know if you have any problems getting it through your mail server or if you prefer another way of getting it to you. How are things progressing? -- Robert Krawitz <rl...@al...> *** MIT Engineers A Proud Tradition http://mitathletics.com *** Member of the League for Programming Freedom -- http://ProgFree.org Project lead for Gutenprint -- http://gimp-print.sourceforge.net "Linux doesn't dictate how I work, I dictate how Linux works." --Eric Crampton |
|
From: Steve L. <sle...@ya...> - 2019-08-16 15:42:07
|
Sorry. If you want to build I am good. I still need to “pretty” up my build script and do some documentation but nothing that should stop us from producing a build. Steve Letter Sent from my Commodore PET > On Aug 16, 2019, at 8:31 AM, Robert Krawitz <rl...@al...> wrote: > > On Sat, 27 Jul 2019 19:49:21 -0500, Matthew Broughton wrote: >>> On Jul 27, 2019, at 7:41 PM, Matthew Broughton <mab...@fa...> wrote: >>> >>>> On Jul 27, 2019, at 4:03 PM, Steve Letter <sle...@ya... <mailto:sle...@ya...>> wrote: >>>> >>>> I'd like to build something current first. Give me a few more days and let me see what I can do. >>>> >>>> Matt, did you want me to update your uninstall or would you rather do it? >>>> >>>> Steve Letter >>> >>> I've made the necessary changes to the uninstaller and tested it. I'll send it to you after I check the preinstall script. There was a lot in there that was the same as the uninstaller. >>> >>> Matt >> >> The preinstall script is fine. It uses `grep` rather than having specific file names when removing symlinks. I'll send the updated uninstaller to you as a compressed file. Let me know if you have any problems getting it through your mail server or if you prefer another way of getting it to you. > > How are things progressing? > -- > Robert Krawitz <rl...@al...> > > *** MIT Engineers A Proud Tradition http://mitathletics.com *** > Member of the League for Programming Freedom -- http://ProgFree.org > Project lead for Gutenprint -- http://gimp-print.sourceforge.net > > "Linux doesn't dictate how I work, I dictate how Linux works." > --Eric Crampton > > > _______________________________________________ > Gimp-print-devel mailing list > Gim...@li... > https://lists.sourceforge.net/lists/listinfo/gimp-print-devel |
|
From: Solomon P. <pi...@sh...> - 2019-08-16 20:16:05
Attachments:
signature.asc
|
On Fri, Aug 16, 2019 at 08:31:58AM -0400, Robert Krawitz wrote: > How are things progressing? If it will help, I now have access to a Late-2014-era Mac Mini, but my I don't know how much time I will have over the next few days or so. - Solomon -- Solomon Peachy pizza at shaftnet dot org High Springs, FL ^^ (email/xmpp) ^^ Quidquid latine dictum sit, altum videtur. |
|
From: Matthew B. <mab...@fa...> - 2019-07-22 17:52:20
|
> On Jul 15, 2019, at 9:05 PM, Steve Letter via Gimp-print-devel <gim...@li...> wrote: > > All, I still don't have 100% confidence, I know I still have parts of the build to look at. (libgutenprint.9.dylib for example) However, I was able to print with the build I put up here: > > gutenprint-5.3.2-pre1.dmg <https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1.dmg/download> > > Gutenprint - Top Quality Printer Drivers ... > Your download will start shortly... > <https://sourceforge.net/projects/gimp-print/files/snapshots/gutenprint-5.3.2-pre1.dmg/download> > > My printer is technically not a supported printer so I need more folks to test that it is operating properly. In tech terms, my build is still a bit wonky. > > Steve Letter I will confirm that I, too, was able to print with the gutenprint-5.3.2-pre1.dmg. I still want to look at a CUPS error log to see if there is any that stands out there. I did find a fault with the installer. I will not update existing PPDs. The installer log says: Jul 22 10:54:51 Borodin installd[1116]: ./postinstall: Updating Gutenprint printer queues... Jul 22 10:54:51 Borodin installd[1116]: ./postinstall: Skipping /private/etc/cups/ppd/WorkForce_1100_GP.ppd: mismatched file versions (old 5.2, new 5.3); will not update without -x! Jul 22 10:54:51 Borodin installd[1116]: ./postinstall: Did not update any PPD files Jul 22 10:54:51 Borodin installd[1116]: PackageKit: Writing receipt for org.gutenprint.printer-driver to / ***************** I added a new printer using Printers & Scanners. The driver for Gutenprint was very strange: "5.3.2-pre1-2019-06-16T01-00-e55733ff" After I added the new printer, I ran the cups-genppdupdate manually using `sudo`. It was able to update the new printer but still could not handle the old 5.2.14.x PPD matt$ sudo /Library/Printers/Gutenprint.printerDriver/Contents/MacOS/cups-genppdupdate Password: Updated /private/etc/cups/ppd/WF1100_53_1.ppd using gutenprint.5.3://escp2-wf1100/expert Skipping /private/etc/cups/ppd/WorkForce_1100_GP.ppd: mismatched file versions (old 5.2, new 5.3); will not update without -x! Updated 1 PPD file, 11 skipped. Restart cupsd for the changes to take effect. I have never encountered `-x!` Matt |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X