Menu
▾
▴
gimp-print-devel
|
From: PhotoBooth b. <rol...@gm...> - 2019-04-09 00:11:48
Attachments:
Screen Shot 2019-04-08 at 4.38.47 PM.png
|
I am having issues trying to get a sony up-dr200 printer to work on a 2010 mac book 2.4ghz with 8gb ram runningHigh Sierra I have read the “hidden dyes printer” topic in the FAQ when I got to add the printer in mac OSX. under the 2nd column that says “kind” it says USB but the instructions say it should say “sony up-dr200 - cups+gutenprint v 5.2.14” at the bottom of the dialog it says use sony up-dr200 - cups+gutenprint v 5.2.14 so at least it is showing in one of the two areas. I also loaded u 5.2.15 pre release with same issue When I try to print the lcd on the front of the printer says transferring, but then it never finishes. it’s like the printer is not getting a stop command. My first post so please go easy on me. I searched the archive and did not see an obvious solution. [image: Screen Shot 2019-04-08 at 4.38.47 PM.png] |
|
From: Matt B. <wal...@ma...> - 2019-04-09 14:00:28
|
> On Apr 8, 2019, at 7:11 PM, PhotoBooth biz <rol...@gm...> wrote:
>
> I am having issues trying to get a sony up-dr200 printer to work on a 2010 mac book 2.4ghz with 8gb ram runningHigh Sierra
> I have read the “hidden dyes printer” topic in the FAQ
>
> when I got to add the printer in mac OSX.
> under the 2nd column that says “kind” it says USB
> but the instructions say it should say “sony up-dr200 - cups+gutenprint v 5.2.14”
>
> at the bottom of the dialog it says use sony up-dr200 - cups+gutenprint v 5.2.14
>
> so at least it is showing in one of the two areas. I also loaded u 5.2.15 pre release with same issue
>
> When I try to print the lcd on the front of the printer says transferring, but then it never finishes. it’s like the printer is not getting a stop command.
>
> My first post so please go easy on me. I searched the archive and did not see an obvious solution.
> <Screen Shot 2019-04-08 at 4.38.47 PM.png>
There is a very serious bug in the Gutenprint 5.2.4 release for Mac. There may also be a problem with the 5.2.15-pre1 release. I hope you can help test to see if you find the same bug.
You are definitely on the right track in installing thed 5.2.15-pre1 release. The printer needs to be set up a bit differently than you currently have it. Please Delete the current printer you have where all you saw was USB. Then you want to add the printer again. This time you should be able to add the printer with a connection of 'gutenprint52+usb'. Then select the software as Sony U-DR200 - CUPS+Gutenprintv5.2.15-pre1. Please post back to let us know if that works.
If you still can't print, please go to the Console application: /Applications/Utilities/Console. There is a column on the left side of the window. Please use the disclosure triangles on the left to find /var/logs/cups. The click on the error_log option. Copy and paste anything that begins with a capital 'E' and post back. It may appear as:
E [31/Mar/2019:12:03:31 -0500] [cups-deviced] PID 1340 (gutenprint52+usb) crashed on signal 6!
If that is what you report, downgrading to Gutenprint 5.2.3 should work. In any event, please post back to let us know if you re-add your printer using gutenprint52+usb and get the message of an error ('E'). That would greatly help the maintainer of the dye sublimation code fix the problem.
--
Matt
wal...@ma...
|
|
From: Robert K. <rl...@al...> - 2019-04-10 01:24:55
|
On Tue, 9 Apr 2019 09:00:19 -0500, Matt Broughton wrote:
>> On Apr 8, 2019, at 7:11 PM, PhotoBooth biz <rol...@gm...> wrote:
>>
>> I am having issues trying to get a sony up-dr200 printer to work on a 2010 mac book 2.4ghz with 8gb ram runningHigh Sierra
>> I have read the 'hidden dyes printer' topic in the FAQ
>>
>> when I got to add the printer in mac OSX.
>> under the 2nd column that says 'kind' it says USB
>> but the instructions say it should say 'sony up-dr200 - cups+gutenprint v 5.2.14'
>>
>> at the bottom of the dialog it says use sony up-dr200 - cups+gutenprint v 5.2.14
>>
>> so at least it is showing in one of the two areas. I also loaded u 5.2.15 pre release with same issue
>>
>> When I try to print the lcd on the front of the printer says transferring, but then it never finishes. it's like the printer is not getting a stop command.
>>
>> My first post so please go easy on me. I searched the archive and did not see an obvious solution.
>> <Screen Shot 2019-04-08 at 4.38.47 PM.png>
>
> There is a very serious bug in the Gutenprint 5.2.4 release for Mac. There may also be a problem with the 5.2.15-pre1 release. I hope you can help test to see if you find the same bug.
5.2.14.
This is the gating factor for releasing 5.2.15, so I'd really like to
get some clarity on it.
> If that is what you report, downgrading to Gutenprint 5.2.3 should work. In any event, please post back to let us know if you re-add your printer using gutenprint52+usb and get the message of an error ('E'). That would greatly help the maintainer of the dye sublimation code fix the problem.
5.2.13, not 5.2.3!
--
Robert Krawitz <rl...@al...>
*** MIT Engineers A Proud Tradition http://mitathletics.com ***
Member of the League for Programming Freedom -- http://ProgFree.org
Project lead for Gutenprint -- http://gimp-print.sourceforge.net
"Linux doesn't dictate how I work, I dictate how Linux works."
--Eric Crampton
|
|
From: Solomon P. <pi...@sh...> - 2019-04-10 02:24:21
Attachments:
signature.asc
|
On Tue, Apr 09, 2019 at 09:24:43PM -0400, Robert Krawitz wrote: > This is the gating factor for releasing 5.2.15, so I'd really like to > get some clarity on it. There are additional fixes for the Sony UP-CR10L coming down the pipe, including backend updates. Just waiting on confirmation from a tester before I commit (and backport). Unfortunately the backend changes have the potential to introduce a "regression" on the UP-DR150 &| UP-DR200, but I don't know anyone who still owns one of those models who isn't also using OSX. Since I lack the means to generate test builds for OSX, it may be prudent to spin a second 5.2.15-pre release.. - Solomon -- Solomon Peachy pizza at shaftnet dot org Coconut Creek, FL ^^ (email/xmpp) ^^ Quidquid latine dictum sit, altum videtur. |
|
From: PhotoBooth b. <rol...@gm...> - 2019-04-10 11:30:45
|
i could not get it to work so I copied the error log below. If you are
based in use, I can the printer to you and I"d gladly Pay for a fix.
E [08/Apr/2019:16:38:57 -0700] [cups-deviced] PID 3107 (gutenprint52+usb)
crashed on signal 6!
E [08/Apr/2019:16:53:40 -0700] [Job 17] Stopping unresponsive job.
E [08/Apr/2019:17:02:12 -0700] Scheduler shutting down due to program error.
E [08/Apr/2019:20:07:53 -0700] [Job 18] Stopping unresponsive job.
E [10/Apr/2019:04:24:45 -0700] [cups-deviced] PID 6069 (gutenprint52+usb)
crashed on signal 6!
E [10/Apr/2019:04:25:00 -0700] [cups-deviced] PID 6081 (gutenprint52+usb)
crashed on signal 6!
E [10/Apr/2019:04:25:56 -0700] [cups-deviced] PID 6108 (gutenprint52+usb)
crashed on signal 6!
E [10/Apr/2019:04:26:11 -0700] [cups-deviced] PID 6120 (gutenprint52+usb)
crashed on signal 6!
E [10/Apr/2019:04:26:26 -0700] [cups-deviced] PID 6131 (gutenprint52+usb)
crashed on signal 6!
E [10/Apr/2019:04:26:41 -0700] [cups-deviced] PID 6143 (gutenprint52+usb)
crashed on signal 6!
E [10/Apr/2019:04:26:56 -0700] [cups-deviced] PID 6152 (gutenprint52+usb)
crashed on signal 6!
E [10/Apr/2019:04:27:12 -0700] [cups-deviced] PID 6160 (gutenprint52+usb)
crashed on signal 6!
E [10/Apr/2019:04:27:27 -0700] [cups-deviced] PID 6169 (gutenprint52+usb)
crashed on signal 6!
E [10/Apr/2019:04:27:42 -0700] [cups-deviced] PID 6177 (gutenprint52+usb)
crashed on signal 6!
E [10/Apr/2019:04:27:57 -0700] [cups-deviced] PID 6188 (gutenprint52+usb)
crashed on signal 6!
E [10/Apr/2019:04:28:13 -0700] [cups-deviced] PID 6196 (gutenprint52+usb)
crashed on signal 6!
E [10/Apr/2019:04:28:28 -0700] [cups-deviced] PID 6205 (gutenprint52+usb)
crashed on signal 6!
E [10/Apr/2019:04:28:43 -0700] [cups-deviced] PID 6213 (gutenprint52+usb)
crashed on signal 6!
On Tue, Apr 9, 2019 at 7:00 AM Matt Broughton <wal...@ma...> wrote:
>
>
> On Apr 8, 2019, at 7:11 PM, PhotoBooth biz <rol...@gm...>
> wrote:
>
> I am having issues trying to get a sony up-dr200 printer to work on a 2010
> mac book 2.4ghz with 8gb ram runningHigh Sierra
> I have read the “hidden dyes printer” topic in the FAQ
>
> when I got to add the printer in mac OSX.
> under the 2nd column that says “kind” it says USB
> but the instructions say it should say “sony up-dr200 - cups+gutenprint v
> 5.2.14”
>
> at the bottom of the dialog it says use sony up-dr200 - cups+gutenprint v
> 5.2.14
>
> so at least it is showing in one of the two areas. I also loaded u 5.2.15
> pre release with same issue
>
> When I try to print the lcd on the front of the printer says transferring,
> but then it never finishes. it’s like the printer is not getting a stop
> command.
>
> My first post so please go easy on me. I searched the archive and did not
> see an obvious solution.
> <Screen Shot 2019-04-08 at 4.38.47 PM.png>
>
>
> There is a very serious bug in the Gutenprint 5.2.4 release for Mac.
> There may also be a problem with the 5.2.15-pre1 release. I hope you can
> help test to see if you find the same bug.
>
> You are definitely on the right track in installing thed 5.2.15-pre1
> release. The printer needs to be set up a bit differently than you
> currently have it. Please Delete the current printer you have where all
> you saw was USB. Then you want to add the printer again. This time you
> should be able to add the printer with a connection of 'gutenprint52+usb'.
> Then select the software as Sony U-DR200 - CUPS+Gutenprintv5.2.15-pre1.
> Please post back to let us know if that works.
>
> If you still can't print, please go to the Console application:
> /Applications/Utilities/Console. There is a column on the left side of
> the window. Please use the disclosure triangles on the left to find
> /var/logs/cups. The click on the error_log option. Copy and paste
> anything that begins with a capital 'E' and post back. It may appear as:
> E [31/Mar/2019:12:03:31 -0500] [cups-deviced] PID 1340 (gutenprint52+usb)
> crashed on signal 6!
>
> If that is what you report, downgrading to Gutenprint 5.2.3 should work.
> In any event, please post back to let us know if you re-add your printer
> using gutenprint52+usb and get the message of an error ('E'). That would
> greatly help the maintainer of the dye sublimation code fix the problem.
>
> --
> Matt
> wal...@ma...
>
>
>
> _______________________________________________
> Gimp-print-devel mailing list
> Gim...@li...
> https://lists.sourceforge.net/lists/listinfo/gimp-print-devel
>
|
|
From: PhotoBooth b. <rol...@gm...> - 2019-04-10 11:40:11
|
I tried installing 5.2.3, but during the installation I get an error
message that the software failed to install because no software was found?
I am running osx high sierra and it looks like 5.2.3 is for much older OSX?
Is the reason it is failing to install?
On Wed, Apr 10, 2019 at 4:30 AM PhotoBooth biz <rol...@gm...>
wrote:
> i could not get it to work so I copied the error log below. If you are
> based in use, I can the printer to you and I"d gladly Pay for a fix.
>
> E [08/Apr/2019:16:38:57 -0700] [cups-deviced] PID 3107 (gutenprint52+usb)
> crashed on signal 6!
> E [08/Apr/2019:16:53:40 -0700] [Job 17] Stopping unresponsive job.
> E [08/Apr/2019:17:02:12 -0700] Scheduler shutting down due to program
> error.
> E [08/Apr/2019:20:07:53 -0700] [Job 18] Stopping unresponsive job.
> E [10/Apr/2019:04:24:45 -0700] [cups-deviced] PID 6069 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:25:00 -0700] [cups-deviced] PID 6081 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:25:56 -0700] [cups-deviced] PID 6108 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:26:11 -0700] [cups-deviced] PID 6120 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:26:26 -0700] [cups-deviced] PID 6131 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:26:41 -0700] [cups-deviced] PID 6143 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:26:56 -0700] [cups-deviced] PID 6152 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:27:12 -0700] [cups-deviced] PID 6160 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:27:27 -0700] [cups-deviced] PID 6169 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:27:42 -0700] [cups-deviced] PID 6177 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:27:57 -0700] [cups-deviced] PID 6188 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:28:13 -0700] [cups-deviced] PID 6196 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:28:28 -0700] [cups-deviced] PID 6205 (gutenprint52+usb)
> crashed on signal 6!
> E [10/Apr/2019:04:28:43 -0700] [cups-deviced] PID 6213 (gutenprint52+usb)
> crashed on signal 6!
>
> On Tue, Apr 9, 2019 at 7:00 AM Matt Broughton <wal...@ma...>
> wrote:
>
>>
>>
>> On Apr 8, 2019, at 7:11 PM, PhotoBooth biz <rol...@gm...>
>> wrote:
>>
>> I am having issues trying to get a sony up-dr200 printer to work on a
>> 2010 mac book 2.4ghz with 8gb ram runningHigh Sierra
>> I have read the “hidden dyes printer” topic in the FAQ
>>
>> when I got to add the printer in mac OSX.
>> under the 2nd column that says “kind” it says USB
>> but the instructions say it should say “sony up-dr200 - cups+gutenprint v
>> 5.2.14”
>>
>> at the bottom of the dialog it says use sony up-dr200 - cups+gutenprint v
>> 5.2.14
>>
>> so at least it is showing in one of the two areas. I also loaded u 5.2.15
>> pre release with same issue
>>
>> When I try to print the lcd on the front of the printer says
>> transferring, but then it never finishes. it’s like the printer is not
>> getting a stop command.
>>
>> My first post so please go easy on me. I searched the archive and did not
>> see an obvious solution.
>> <Screen Shot 2019-04-08 at 4.38.47 PM.png>
>>
>>
>> There is a very serious bug in the Gutenprint 5.2.4 release for Mac.
>> There may also be a problem with the 5.2.15-pre1 release. I hope you can
>> help test to see if you find the same bug.
>>
>> You are definitely on the right track in installing thed 5.2.15-pre1
>> release. The printer needs to be set up a bit differently than you
>> currently have it. Please Delete the current printer you have where all
>> you saw was USB. Then you want to add the printer again. This time you
>> should be able to add the printer with a connection of 'gutenprint52+usb'.
>> Then select the software as Sony U-DR200 - CUPS+Gutenprintv5.2.15-pre1.
>> Please post back to let us know if that works.
>>
>> If you still can't print, please go to the Console application:
>> /Applications/Utilities/Console. There is a column on the left side of
>> the window. Please use the disclosure triangles on the left to find
>> /var/logs/cups. The click on the error_log option. Copy and paste
>> anything that begins with a capital 'E' and post back. It may appear as:
>> E [31/Mar/2019:12:03:31 -0500] [cups-deviced] PID 1340 (gutenprint52+usb)
>> crashed on signal 6!
>>
>> If that is what you report, downgrading to Gutenprint 5.2.3 should work.
>> In any event, please post back to let us know if you re-add your printer
>> using gutenprint52+usb and get the message of an error ('E'). That would
>> greatly help the maintainer of the dye sublimation code fix the problem.
>>
>> --
>> Matt
>> wal...@ma...
>>
>>
>>
>> _______________________________________________
>> Gimp-print-devel mailing list
>> Gim...@li...
>> https://lists.sourceforge.net/lists/listinfo/gimp-print-devel
>>
>
|
|
From: Robert K. <rl...@al...> - 2019-04-10 12:03:17
|
On Wed, 10 Apr 2019 04:39:51 -0700, PhotoBooth biz wrote: > I tried installing 5.2.3, but during the installation I get an error > message that the software failed to install because no software was found? > I am running osx high sierra and it looks like 5.2.3 is for much older OSX? > Is the reason it is failing to install? That should have been 5.2.13. -- Robert Krawitz <rl...@al...> *** MIT Engineers A Proud Tradition http://mitathletics.com *** Member of the League for Programming Freedom -- http://ProgFree.org Project lead for Gutenprint -- http://gimp-print.sourceforge.net "Linux doesn't dictate how I work, I dictate how Linux works." --Eric Crampton |
|
From: Matt B. <wal...@ma...> - 2019-04-10 13:19:13
|
> On Apr 10, 2019, at 7:03 AM, Robert Krawitz <rl...@al...> wrote: > > On Wed, 10 Apr 2019 04:39:51 -0700, PhotoBooth biz wrote: >> I tried installing 5.2.3, but during the installation I get an error >> message that the software failed to install because no software was found? >> I am running osx high sierra and it looks like 5.2.3 is for much older OSX? >> Is the reason it is failing to install? > > That should have been 5.2.13. > -- > Robert Krawitz <rl...@al...> > Sorry about my typos. My fingers apparently weren't working very well yesterday. Yes, 5.2.13 gutenprint-5.2.13.dmg <https://sourceforge.net/projects/gimp-print/files/gutenprint-5.2/5.2.13/gutenprint-5.2.13.dmg/download> Matt -- Matt Broughton wal...@ma... |
|
From: Steve L. <sle...@ya...> - 2019-04-10 12:10:40
|
Solomon, If you need an unofficial build for testing, let me know. Steve Letter System Software Engineer, Embedded > On Apr 9, 2019, at 10:24 PM, Solomon Peachy <pi...@sh...> wrote: > >> On Tue, Apr 09, 2019 at 09:24:43PM -0400, Robert Krawitz wrote: >> This is the gating factor for releasing 5.2.15, so I'd really like to >> get some clarity on it. > > There are additional fixes for the Sony UP-CR10L coming down the pipe, > including backend updates. Just waiting on confirmation from a > tester before I commit (and backport). > > Unfortunately the backend changes have the potential to introduce a > "regression" on the UP-DR150 &| UP-DR200, but I don't know anyone > who still owns one of those models who isn't also using OSX. Since I > lack the means to generate test builds for OSX, it may be prudent to > spin a second 5.2.15-pre release.. > > - Solomon > -- > Solomon Peachy pizza at shaftnet dot org > Coconut Creek, FL ^^ (email/xmpp) ^^ > Quidquid latine dictum sit, altum videtur. > _______________________________________________ > Gimp-print-devel mailing list > Gim...@li... > https://lists.sourceforge.net/lists/listinfo/gimp-print-devel |
|
From: Solomon P. <pi...@sh...> - 2019-04-13 16:03:00
Attachments:
signature.asc
|
On Wed, Apr 10, 2019 at 08:10:01AM -0400, Steve Letter via Gimp-print-devel wrote: > If you need an unofficial build for testing, let me know. If you could generate an unofficial test build with git master (not the 5.2 branch!) I'd greatly appreciate it. If the Sony code checks out on the UP-DR150/200 models, then I'll backport that to 5.2 and we can proceed with a new 5.2 release.. - Solomon -- Solomon Peachy pizza at shaftnet dot org Coconut Creek, FL ^^ (email/xmpp) ^^ Quidquid latine dictum sit, altum videtur. |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X