gimp-print-devel

Re: [Gimp-print-devel] Advice Needed: Develop Driver Epson SureColor P-5000

[Solomon P. <pi...@sh...>]

On Wed, Jan 03, 2024 at 11:17:42AM -0500, Bacon At Taha wrote:
> Thank you very much Solomon! That is very helpful information to get me started.
> 
> When the time comes, what is the procedure for submitting patches? I have experience using github this way, but not SourceForge.

Sourceforge has a ticketing system, and the ability to fork and submit 
pull requests.  Or you can post a patch to the mailing list.

 - Solomon
-- 
Solomon Peachy			      pizza at shaftnet dot org (email&xmpp)
                                      @pizza:shaftnet dot org   (matrix)
Dowling Park, FL                      speachy (libera.chat)

Re: [Gimp-print-devel] Advice Needed: Develop Driver Epson SureColor P-5000

[Bacon At T. <ba...@ta...>]

Thank you very much Solomon! That is very helpful information to get me started.

When the time comes, what is the procedure for submitting patches? I have experience using github this way, but not SourceForge.


Regards,

Erik

Sent from my iPhone

> On Jan 3, 2024, at 11:08, Solomon Peachy via Gimp-print-devel <gim...@li...> wrote:
> 
> On Sun, Dec 31, 2023 at 04:31:43PM -0500, Erik Beck wrote:
>> I have an Epson SureColor P-5000 (commercial edition), a 10 ink 17"
>> wide-format printer. I am currently printing to it either in Linux via
>> an Epson PPD for device, or via Windows.  I would like to be able to
>> support it properly with gutenprint. What's the best way to develop a
>> driver based on the existing SureColor drivers (P-6000, P-7000, etc)?
> 
> Hmm.  I'm far from an expert when it comes to the Epson Inkjets.  But
> assuming it's just a size variant of the P6000/P7000 models and still
> supports ESC/P2 (as opposed to ESC/PR) then a good place to start is to
> generate a raw data dump (eg print-to-file under Windows) andpass that
> into parse-escp2 to see what's going on.
> 
> (To determine the PDLs it suppors, plug the printer into a Linux box and run
> 'lpinfo -lv' and look at the 'device-id' string.  Of particular interest
> is the 'CMD:....' string)
> 
> Meanwhile, A good example of what's needed to add a new epson printer is
> commit 97efe256b, which added support for the SL-D700 (a bespoke 6-ink
> set and printer-specific roll-only paper types).
> 
> But it's more likely that you can largely cut-n-paste the definition of
> the P7000CE in srx/xml/printers/escp2.xml with a unique modelid, then
> copy src/xml/escp2/models/model_126.xml to the new modelid, and modify
> it to change the imageable area.
> 
> If the P5000CE uses a new inkset, you'll need to create a new one (again
> you can use the definition referenced in the model_126 file as an
> example).   
> 
> So that's a decent starting point.
> 
> - Solomon
> --
> Solomon Peachy                  pizza at shaftnet dot org (email&xmpp)
>                                      @pizza:shaftnet dot org   (matrix)
> Dowling Park, FL                      speachy (libera.chat)
> _______________________________________________
> Gimp-print-devel mailing list
> Gim...@li...
> https://lists.sourceforge.net/lists/listinfo/gimp-print-devel

Re: [Gimp-print-devel] Advice Needed: Develop Driver Epson SureColor P-5000

[Solomon P. <pi...@sh...>]

On Sun, Dec 31, 2023 at 04:31:43PM -0500, Erik Beck wrote:
> I have an Epson SureColor P-5000 (commercial edition), a 10 ink 17"
> wide-format printer. I am currently printing to it either in Linux via
> an Epson PPD for device, or via Windows.  I would like to be able to
> support it properly with gutenprint. What's the best way to develop a
> driver based on the existing SureColor drivers (P-6000, P-7000, etc)?

Hmm.  I'm far from an expert when it comes to the Epson Inkjets.  But 
assuming it's just a size variant of the P6000/P7000 models and still 
supports ESC/P2 (as opposed to ESC/PR) then a good place to start is to 
generate a raw data dump (eg print-to-file under Windows) andpass that 
into parse-escp2 to see what's going on.

(To determine the PDLs it suppors, plug the printer into a Linux box and run 
 'lpinfo -lv' and look at the 'device-id' string.  Of particular interest 
 is the 'CMD:....' string)

Meanwhile, A good example of what's needed to add a new epson printer is 
commit 97efe256b, which added support for the SL-D700 (a bespoke 6-ink 
set and printer-specific roll-only paper types).

But it's more likely that you can largely cut-n-paste the definition of 
the P7000CE in srx/xml/printers/escp2.xml with a unique modelid, then 
copy src/xml/escp2/models/model_126.xml to the new modelid, and modify 
it to change the imageable area.

If the P5000CE uses a new inkset, you'll need to create a new one (again 
you can use the definition referenced in the model_126 file as an 
example).   

So that's a decent starting point.

 - Solomon
-- 
Solomon Peachy			      pizza at shaftnet dot org (email&xmpp)
                                      @pizza:shaftnet dot org   (matrix)
Dowling Park, FL                      speachy (libera.chat)

[Gimp-print-devel] Advice Needed: Develop Driver Epson SureColor P-5000

[Erik B. <ba...@ta...>]

Hi all,

I have an Epson SureColor P-5000 (commercial edition), a 10 ink 17"
wide-format printer. I am currently printing to it either in Linux via
an Epson PPD for device, or via Windows.  I would like to be able to
support it properly with gutenprint. What's the best way to develop a
driver based on the existing SureColor drivers (P-6000, P-7000, etc)?

Thanks,

Erik

[Gimp-print-devel] Faulty floating point comparisons lead to false errors

[Johannes M. <js...@su...>]

Hello,

this is a follow up of the mail thread with subject

"Gutenprint 5.3.4: only on 32-bit failures with
  'Image is too long/wide for the page'
for certain PPDs"

see

https://sourceforge.net/p/gimp-print/mailman/gimp-print-devel/thread/5676098bc0fd4489557f650e2199ebd9%40suse.de

At SUSE we did some deeper investigation of the root cause
and came to the following conclusions:

Rounding effects in intermediate calculations
throw results off by some least significant bits
with any limited-precision floating point formats.

If you do:
------------------------------------------------------
floattype a = <some calculation 1>;
floattype b = <some other calculation 2>;
------------------------------------------------------
where mathematically calc1 and calc2 are the same value,
then
------------------------------------------------------
if (a > b)   /* which imples a != b */
   error();
------------------------------------------------------
calls for unpredictable problems.

On hardware 1 it might work, on hardware 2 it might not,
when calc1 and calc2 happen to be implemented
with different sequences of CPU instructions
on hardware 1 versus hardware 2.

This cannot be properly fixed with compiler settings
because then calc1 and calc2 can still be implemented
with different sequences of CPU instructions
on hardware 1 versus hardware 2.

The only way out (for what is needed in this case)
is using an epsilon neighbourhood for comparisons
with floating point formats.

For example like the following:

With an open epsilon neighbourhood of b:
------------------------------------------------------
/* consider a greater than b
  * only if a is significantly greater than b
  */
if ( a >= b + epsilon )

/* consider a less than b
  * only if a is significantly less than b
  */
if ( a <= b - epsilon )

/* consider a equals b
  * when a and b do not significantly differ
  */
if ( a < b + epsilon && a > b - epsilon )
------------------------------------------------------
or alternatively
with a closed epsilon neighbourhood of b:
------------------------------------------------------
/* consider a greater than b
  * only if a is significantly greater than b
  */
if ( a > b + epsilon )

/* consider a less than b
  * only if a is significantly less than b
  */
if ( a < b - epsilon )

/* consider a equals b
  * when a and b do not significantly differ
  */
if ( a <= b + epsilon && a >= b - epsilon )
------------------------------------------------------

The point is to not tinker with the calculations
but to only fix the comparisons.


Kind Regards
Johannes Meixner
-- 
SUSE Software Solutions Germany GmbH
Frankenstr. 146 - 90461 Nuernberg - Germany
GF: Ivo Totev, Andrew McDonald, Werner Knoblich
(HRB 36809, AG Nuernberg)

[Gimp-print-devel] ET-8550

[John D. <joh...@ya...>]

Hello,
The ET-8550 is a six-color Epson EcoTank printer.  I would like to have one set up to print carbon monochrome prints.  I am wondering if your team is looking at supporting it, or whether it is a matter of porting over other six-color programming (this is not my area of expertise, obviously).
I think a refillable B&W printer would be quite wonderful, avoiding the work-arounds needed to foil cartridge protection schemes.
Thank you.
Best Regards,
John

Re: [Gimp-print-devel] RFC: New release and abandoning MacOS?

[Matt B. <wal...@ma...>]

> On Jun 28, 2023, at 8:19 PM, Solomon Peachy <pi...@sh...> wrote:
> 
> On Wed, Jun 28, 2023 at 07:44:55PM -0500, Matt Broughton wrote:
>> I am not sure I know all of the macOS issues or how difficult it would 
>> be to accomodate them.  I do know that the v5.3.x macOS releases are a 
>> show stopper for printers that can print on CDs or DVDs. No Printer 
>> Features can be seen in the GUI.  Even trying to see the Printer 
>> Features will crash some applications. PPDs can be modified to resolve 
>> this issue.  Alternatively, genppd.c can be modified.  I have a 
>> modified genppd.c we used for testing that fixes the issue.
> 
> Since this is due to a PPD construct, I assume this problem happens with 
> remote network printers (set up to use a PPD instead of IPP) as well as 
> locally-attached ones?

I believe that is correct.

> 
> Meanwhile, what's the technical argument against merging this change?

It isn't a technical argument.  It is a feature issue.  The problem under macOS is using custom CD sizes.  That is where the user can manually enter a value in the print window that isn't contained in the spin box.  The PPD needs to have the following lines removed--

*CustomStpCDOuterDiameter True: "pop"
*ParamCustomStpCDOuterDiameter Value/Value: 1 points 184 340
 
*CustomStpCDInnerDiameter True: "pop"
*ParamCustomStpCDInnerDiameter Value/Value: 1 points 45 121
 
*CustomStpCDXAdjustment True: "pop"
*ParamCustomStpCDXAdjustment Value/Value: 1 points -30 30
 
*CustomStpCDYAdjustment True: "pop"
*ParamCustomStpCDYAdjustment Value/Value: 1 points -30 30

Implementing the change globally takes away an important feature for non-macOS users.  There was no decision on how to deal with this.  It didn't seem palatable to test for Apple platform in the source code.

Matt

Re: [Gimp-print-devel] RFC: New release and abandoning MacOS?

[Solomon P. <pi...@sh...>]

On Wed, Jun 28, 2023 at 07:44:55PM -0500, Matt Broughton wrote:
> I am not sure I know all of the macOS issues or how difficult it would 
> be to accomodate them.  I do know that the v5.3.x macOS releases are a 
> show stopper for printers that can print on CDs or DVDs. No Printer 
> Features can be seen in the GUI.  Even trying to see the Printer 
> Features will crash some applications. PPDs can be modified to resolve 
> this issue.  Alternatively, genppd.c can be modified.  I have a 
> modified genppd.c we used for testing that fixes the issue.

Since this is due to a PPD construct, I assume this problem happens with 
remote network printers (set up to use a PPD instead of IPP) as well as 
locally-attached ones?

Meanwhile, what's the technical argument against merging this change?

 - Solomon
-- 
Solomon Peachy			      pizza at shaftnet dot org (email&xmpp)
                                      @pizza:shaftnet dot org   (matrix)
Dowling Park, FL                      speachy (libra.chat)

Re: [Gimp-print-devel] RFC: New release and abandoning MacOS?

[Matt B. <wal...@ma...>]

> On Jun 27, 2023, at 12:03 PM, Solomon Peachy via Gimp-print-devel <gim...@li...> wrote:
> 
> I'd _really_ like to see a proper, full release go out; I'm still 
> getting bug/support issues about 5.3.3, which is the last release we 
> actually announced... nearly four years ago.  While we did cut a 5.3.4 
> tarball, we never announced it to the world, holding back due to the
> lack of a sane/working MacOS installer.
> 
> In the subequent 2.5 years, things are even worse today on the MacOS 
> front, as Apple has continuted to iterate on their platform vision in a
> way we've just not been able to keep up with.
> 
> Meanwhile, there have been more printer additions and even more 
> bugfixes, and I think it's past the time we cut a new release so maybe 
> our first answer to nearly every support request won't be "uninstall 
> whatever you got from your distro and compile Gutenprint maually"
> 
> Additionally, since we can't meaningfully support MacOS at all any more, 
> IMO it makes more sense to just walk away from it entirely.  Once we get 
> a "Gutenprint Printer Application" working for the brave new 
> IPP-Everywhere paradigm, we can revisit releasing that for MacOS if it 
> still makes sense to do so.
> 
> Thoughts?  

By all means, go forward.  Not having an active maintainer for macOS shouldn't hold up progress on other fronts. 

I am not sure I know all of the macOS issues or how difficult it would be to accomodate them.  I do know that the v5.3.x macOS releases are a show stopper for printers that can print on CDs or DVDs. No Printer Features can be seen in the GUI.  Even trying to see the Printer Features will crash some applications. PPDs can be modified to resolve this issue.  Alternatively, genppd.c can be modified.  I have a modified genppd.c we used for testing that fixes the issue.

I'm not sure what label you should put on the Mac platform.  Suspended/inactive or currently unsupported might work.  Perhaps it will generate some inquiries and lead to returning to an active maintainer status.

Matt

Re: [Gimp-print-devel] RFC: New release and abandoning MacOS?

[Greg T. <gd...@le...>]

Solomon Peachy via Gimp-print-devel
<gim...@li...> writes:

> I'd _really_ like to see a proper, full release go out; I'm still 
> getting bug/support issues about 5.3.3, which is the last release we 
> actually announced... nearly four years ago.  While we did cut a 5.3.4 
> tarball, we never announced it to the world, holding back due to the
> lack of a sane/working MacOS installer.
>
> In the subequent 2.5 years, things are even worse today on the MacOS 
> front, as Apple has continuted to iterate on their platform vision in a
> way we've just not been able to keep up with.
>
> Meanwhile, there have been more printer additions and even more 
> bugfixes, and I think it's past the time we cut a new release so maybe 
> our first answer to nearly every support request won't be "uninstall 
> whatever you got from your distro and compile Gutenprint maually"
>
> Additionally, since we can't meaningfully support MacOS at all any more, 
> IMO it makes more sense to just walk away from it entirely.  Once we get 
> a "Gutenprint Printer Application" working for the brave new 
> IPP-Everywhere paradigm, we can revisit releasing that for MacOS if it 
> still makes sense to do so.

Speaking as a packager (pkgsrc) and user (on NetBSD), this seems
reasonable.

I am unclear on the mac issues; I wonder if a command-line build is
workable, skipping the entire GUI world, so that
e.g. pkgsrc/homebrew/fink could build it on macOS.  But if even that is
too much, just marking it unsupported (while not actively withdrawing)
makes sense.

Speaking as a Free Software community member, I think it's 100% ok to
simply decline to support a non-Free system that is becoming more
difficult.  mac users are welcome to ask Apple to contribute fixes, to
do the work themselves, or to hire someone to do it.


Separately, I remember some issues with 5.3.4 on NetBSD that I didn't
manage to figure out, so my suggestion would be to tag an alpha (with a
release tarball) as soon as reasonably practical to ask packagers and
users to start testing.

Greg

[Gimp-print-devel] RFC: New release and abandoning MacOS?

[Solomon P. <pi...@sh...>]

I'd _really_ like to see a proper, full release go out; I'm still 
getting bug/support issues about 5.3.3, which is the last release we 
actually announced... nearly four years ago.  While we did cut a 5.3.4 
tarball, we never announced it to the world, holding back due to the
lack of a sane/working MacOS installer.

In the subequent 2.5 years, things are even worse today on the MacOS 
front, as Apple has continuted to iterate on their platform vision in a
way we've just not been able to keep up with.

Meanwhile, there have been more printer additions and even more 
bugfixes, and I think it's past the time we cut a new release so maybe 
our first answer to nearly every support request won't be "uninstall 
whatever you got from your distro and compile Gutenprint maually"

Additionally, since we can't meaningfully support MacOS at all any more, 
IMO it makes more sense to just walk away from it entirely.  Once we get 
a "Gutenprint Printer Application" working for the brave new 
IPP-Everywhere paradigm, we can revisit releasing that for MacOS if it 
still makes sense to do so.

Thoughts?  

 - Solomon
-- 
Solomon Peachy			      pizza at shaftnet dot org (email&xmpp)
                                      @pizza:shaftnet dot org   (matrix)
Dowling Park, FL                      speachy (libra.chat)

Re: [Gimp-print-devel] WWW updates

[Matt B. <wal...@ma...>]

> On Jun 14, 2023, at 5:29 PM, Solomon Peachy via Gimp-print-devel <gim...@li...> wrote:
> 
> Sourceforge graciously notified us that they'll be updating the truly 
> ancient PHP version that has been powering the gutenprint www site, moving
> from v5.4 to v7.4 in August, and then to v8 at some point after that.
> 
> This is a good thing, but it turns out our ancient www code just wasn't 
> ready.  I just fixed up the last of those issues, and told sourceforge 
> to move our site to the PHP7 host.
> 
> Unfortunately, this meanns the base of the URLs was changed from from 
> http://gimp-print.sourceforge.net to https://gimp-print.sourceforge.io.  
> Sourceforge has a permanent redirect in place that is supposed to stay 
> there indefinitely, so that should work out ok.
> 
> I also took this opportunity to clean up the various URLs on our WWW 
> site to ensure they use https where possible.
> 
> And now, back to your previously scheduled limping along.  :)

Thank you Solomon. 
Matt 

Re: [Gimp-print-devel] WWW updates

[Russell S. <rj...@ne...>]

On 15/6/23 08:29, Solomon Peachy via Gimp-print-devel wrote:
> Sourceforge graciously notified us that they'll be updating the truly
> ancient PHP version that has been powering the gutenprint www site, moving
> from v5.4 to v7.4 in August, and then to v8 at some point after that.

Das ist gut ;)

[Gimp-print-devel] WWW updates

[Solomon P. <pi...@sh...>]

Sourceforge graciously notified us that they'll be updating the truly 
ancient PHP version that has been powering the gutenprint www site, moving
from v5.4 to v7.4 in August, and then to v8 at some point after that.

This is a good thing, but it turns out our ancient www code just wasn't 
ready.  I just fixed up the last of those issues, and told sourceforge 
to move our site to the PHP7 host.

Unfortunately, this meanns the base of the URLs was changed from from 
http://gimp-print.sourceforge.net to https://gimp-print.sourceforge.io.  
Sourceforge has a permanent redirect in place that is supposed to stay 
there indefinitely, so that should work out ok.

I also took this opportunity to clean up the various URLs on our WWW 
site to ensure they use https where possible.

And now, back to your previously scheduled limping along.  :)

 - Solomon
-- 
Solomon Peachy			      pizza at shaftnet dot org (email&xmpp)
                                      @pizza:shaftnet dot org   (matrix)
Dowling Park, FL                      speachy (libra.chat)

Re: [Gimp-print-devel] Epson SC-P900 Support

[Solomon P. <pi...@sh...>]

On Fri, May 12, 2023 at 03:54:49AM +0200, Marius Steffen wrote:
> any news/progress on this?

Nothing on my end, certainly.

But as an example, when I added in the Epson SL-D700 (roll-fed, 6-color 
inkset) about two years ago, I produced over 100 6x8" prints before the 
print quality was considered "good enough" for client -- and there was 
still a lot of work remaining for the remaining quality+paper 
combinations.

Granted that included prints that I made when trying to implement basic 
functonal support, and I didn't quote know what I was doing when I 
started.  Putting aside the truly new ink colors, the more inks are 
involved (and drop sizes) the more knobs there are to tune.

 - Solomon
-- 
Solomon Peachy			      pizza at shaftnet dot org (email&xmpp)
                                      @pizza:shaftnet dot org   (matrix)
Dowling Park, FL                      speachy (libra.chat)

Re: [Gimp-print-devel] Epson SC-P900 Support

[Marius S. <ma...@ma...>]

Hi,

any news/progress on this?

Kind regards,

Marius Steffen
ma...@ma...



> Am 31.03.2023 um 23:28 schrieb Marius Steffen <ma...@ma...>:
> 
> Sorry for the weird reply, I had my subscription paused, so I cannot properly reply.
> 
> I’m aware of both AirPrint and Epson driver support, but I’d love to have the additional capabilities of Gutenprint, especially manual linearization.
> How much ink are we roughly talking about? 
> 
> Greetings,
> 
> 
> Marius Steffen
> ma...@ma...
> 
> 
> 
>> Am 31.03.2023 um 00:56 schrieb Marius Steffen <ma...@ma...>:
>> 
>> Hi,
>> 
>> I’ve just got a new Epson SC-P900 and noticed there’s no support in Gutenprint for it - is there anything I can provide you with to add support for it?
>> 
>> Greetings,
>> 
>> 
>> Marius Steffen
>> ma...@ma...
>> 
>> 
>> 
> 

Re: [Gimp-print-devel] Epson SC-P900 Support

[Marius S. <ma...@ma...>]

Sorry for the weird reply, I had my subscription paused, so I cannot properly reply.

I’m aware of both AirPrint and Epson driver support, but I’d love to have the additional capabilities of Gutenprint, especially manual linearization.
How much ink are we roughly talking about? 

Greetings,


Marius Steffen
ma...@ma...



> Am 31.03.2023 um 00:56 schrieb Marius Steffen <ma...@ma...>:
> 
> Hi,
> 
> I’ve just got a new Epson SC-P900 and noticed there’s no support in Gutenprint for it - is there anything I can provide you with to add support for it?
> 
> Greetings,
> 
> 
> Marius Steffen
> ma...@ma...
> 
> 
> 

Re: [Gimp-print-devel] Epson SC-P900 Support

[Solomon P. <pi...@sh...>]

On Fri, Mar 31, 2023 at 12:56:50AM +0200, Marius Steffen wrote:
> I’ve just got a new Epson SC-P900 and noticed there’s no support in 
> Gutenprint for it - is there anything I can provide you with to add 
> support for it?

Looking at the specs for this thing, it claims to natively support 
AirPrint which implies IPP-Everywhere -- along with its builtin 
wired/wireless networking support, should JustWork(tm) with semi-modern 
Linux (and Mac) systems.

If that's not good enough, and you need Gutenprint's feature set, I'd 
expect getting the printer working will be straightforward (specs imply 
ESC/P2, 10 ink channels, 180 nozzles per), but in that ink set there's a 
new violet ink that would need to be added to gutenprint, and of course 
a decent amount of ink would need to be expended to tune the overall 
output until it's of sufficient quality.

There was a discussion about this printer back in October/November 2021, 
but I don't think anything meaningful came of it.  Supposedly the P800 
driver worked reasonably well, though it lacked the full ink set.

 - Solomon
-- 
Solomon Peachy			      pizza at shaftnet dot org (email&xmpp)
                                      @pizza:shaftnet dot org   (matrix)
Dowling Park, FL                      speachy (libra.chat)

Re: [Gimp-print-devel] Epson SC-P900 Support

[Michael S. <ms...@ms...>]

FWIW, the P900 supports AirPrint so the usual driverless support on Linux/macOS will work.


> On Mar 30, 2023, at 6:56 PM, Marius Steffen <ma...@ma...> wrote:
> 
> Hi,
> 
> I’ve just got a new Epson SC-P900 and noticed there’s no support in Gutenprint for it - is there anything I can provide you with to add support for it?
> 
> Greetings,
> 
> 
> Marius Steffen
> ma...@ma...
> 
> 
> 
> _______________________________________________
> Gimp-print-devel mailing list
> Gim...@li...
> https://lists.sourceforge.net/lists/listinfo/gimp-print-devel

________________________
Michael Sweet

[Gimp-print-devel] Epson SC-P900 Support

[Marius S. <ma...@ma...>]

Hi,

I’ve just got a new Epson SC-P900 and noticed there’s no support in Gutenprint for it - is there anything I can provide you with to add support for it?

Greetings,


Marius Steffen
ma...@ma...

[Gimp-print-devel] canon selphy 1200: ***Gutenprint 5.3.4 assertion list

[Roger <rog...@gm...>]

On Tue, Feb 28, 2023 at 07:52:36PM -0500, Roger wrote:
Using a canon selphy 1200, keep getting a "Filter failed" cups frontend error 
code.

Within the cups error log:

Gutenprint: ERROR: ***Gutenprint 5.3.4 assertion list != NULL failed! file 
print-list.c, line 212.  Please report this bug!


Roger


Full /var/log/cups/error logging:

D [28/Feb/2023:19:46:04 -0500] [Client 1] CGI data ready to be sent.
D [28/Feb/2023:19:46:04 -0500] PID 15296 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [28/Feb/2023:19:46:04 -0500] [Client 1] con->http=0x55ad51ac0fb0
D [28/Feb/2023:19:46:04 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15296, file=17
D [28/Feb/2023:19:46:04 -0500] [Client 1] Waiting for CGI data.
D [28/Feb/2023:19:46:04 -0500] [Client 1] Sending 0-length chunk.
D [28/Feb/2023:19:46:04 -0500] [Client 1] Flushing write buffer.
D [28/Feb/2023:19:46:04 -0500] [Client 1] New state is HTTP_STATE_WAITING
D [28/Feb/2023:19:46:04 -0500] [Client 1] Waiting for request.
D [28/Feb/2023:19:46:04 -0500] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [28/Feb/2023:19:46:13 -0500] [Client 1] POST /printers/canon_selphy_cp1200 HTTP/1.1
D [28/Feb/2023:19:46:13 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [28/Feb/2023:19:46:13 -0500] [Client 1] Read: status=200, state=6
D [28/Feb/2023:19:46:13 -0500] [Client 1] Authorized as "root" using Basic.
D [28/Feb/2023:19:46:13 -0500] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/printers.cgi"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/doc/cups"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[3] = "CUPS_REQUESTROOT=/var/spool/cups"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[4] = "CUPS_SERVERBIN=/usr/lib/cups"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[5] = "CUPS_SERVERROOT=/etc/cups"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[6] = "CUPS_STATEDIR=/run/cups"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[7] = "HOME=/var/spool/cups/tmp"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[8] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[9] = "SERVER_ADMIN=root@4void"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[10] = "SOFTWARE=CUPS/2.4.2"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[11] = "TMPDIR=/var/spool/cups/tmp"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[12] = "USER=root"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[13] = "CUPS_MAX_MESSAGE=2047"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[14] = "CUPS_SERVER=/run/cups/cups.sock"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[16] = "IPP_PORT=631"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[17] = "AUTH_TYPE=Basic"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[18] = "LANG=en_US.UTF8"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[19] = "REDIRECT_STATUS=1"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[21] = "SERVER_NAME=localhost"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[22] = "SERVER_PORT=631"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[24] = "REMOTE_HOST=localhost"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[25] = "SCRIPT_NAME=/printers/canon_selphy_cp1200"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/doc/cups/printers/canon_selphy_cp1200"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[27] = "PATH_INFO=/canon_selphy_cp1200"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[28] = "REMOTE_USER=root"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[29] = "SERVER_PROTOCOL=HTTP/1.1"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[30] = "HTTP_COOKIE=org.cups.sid=dc588e31213b6af2038380c9852a5026"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[31] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/110.0.0.0 Safari/537.36"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[32] = "HTTP_REFERER=http://localhost:631/printers/canon_selphy_cp1200"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[33] = "REQUEST_METHOD=POST"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[34] = "CONTENT_LENGTH=64"
>D [28/Feb/2023:19:46:13 -0500] [CGI] envp[35] = "CONTENT_TYPE=application/x-www-form-urlencoded"
>D [28/Feb/2023:19:46:13 -0500] cupsdAddCert: Adding certificate for PID 15317
>D [28/Feb/2023:19:46:13 -0500] [CGI] Started /usr/lib/cups/cgi-bin/printers.cgi (PID 15317)
>I [28/Feb/2023:19:46:13 -0500] [Client 1] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=15317, file=18)
>D [28/Feb/2023:19:46:13 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:13 -0500] [CGI] org.cups.sid cookie is \"dc588e31213b6af2038380c9852a5026\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: org.cups.sid=\"dc588e31213b6af2038380c9852a5026\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: OP=\"print-test-page\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: SECTION=\"printers\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: PRINTER_NAME=\"canon_selphy_cp1200\"
>D [28/Feb/2023:19:46:13 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
>D [28/Feb/2023:19:46:13 -0500] [Client 5] Server address is "/run/cups/cups.sock".
>D [28/Feb/2023:19:46:13 -0500] [Client 5] Accepted from localhost (Domain)
>D [28/Feb/2023:19:46:13 -0500] [Client 5] Waiting for request.
>D [28/Feb/2023:19:46:13 -0500] [Client 5] POST /printers/canon_selphy_cp1200 HTTP/1.1
>D [28/Feb/2023:19:46:13 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
>D [28/Feb/2023:19:46:13 -0500] [Client 5] Read: status=200, state=6
>D [28/Feb/2023:19:46:13 -0500] [Client 5] No authentication data provided.
>D [28/Feb/2023:19:46:13 -0500] [Client 5] 2.0 Print-Job 1
>D [28/Feb/2023:19:46:13 -0500] Print-Job ipp://localhost:631/printers/canon_selphy_cp1200
>D [28/Feb/2023:19:46:13 -0500] [Job ???] Auto-typing file...
>I [28/Feb/2023:19:46:13 -0500] [Job ???] Request file type is application/vnd.cups-pdf-banner.
>D [28/Feb/2023:19:46:13 -0500] cupsdMarkDirty(---J-)
>D [28/Feb/2023:19:46:13 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Applying default options...
>D [28/Feb/2023:19:46:13 -0500] add_job: requesting-user-name="root"
>D [28/Feb/2023:19:46:13 -0500] Adding default job-sheets values "none,none"...
>I [28/Feb/2023:19:46:13 -0500] [Job 477] Adding start banner page "none".
>D [28/Feb/2023:19:46:13 -0500] Discarding unused job-created event...
>D [28/Feb/2023:19:46:13 -0500] cupsdMarkDirty(---J-)
>D [28/Feb/2023:19:46:13 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
>I [28/Feb/2023:19:46:13 -0500] [Job 477] Adding end banner page "none".
>I [28/Feb/2023:19:46:13 -0500] [Job 477] File of type application/vnd.cups-pdf-banner queued by "root".
>D [28/Feb/2023:19:46:13 -0500] [Job 477] hold_until=0
>I [28/Feb/2023:19:46:13 -0500] [Job 477] Queued on "canon_selphy_cp1200" by "root".
>D [28/Feb/2023:19:46:13 -0500] [Job 477] time-at-processing=1677631573
>D [28/Feb/2023:19:46:13 -0500] cupsdMarkDirty(---J-)
>D [28/Feb/2023:19:46:13 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
>D [28/Feb/2023:19:46:13 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
>D [28/Feb/2023:19:46:13 -0500] Discarding unused printer-state-changed event...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] 4 filters for job:
>D [28/Feb/2023:19:46:13 -0500] [Job 477] bannertopdf (application/vnd.cups-pdf-banner to application/pdf, cost 32)
>D [28/Feb/2023:19:46:13 -0500] [Job 477] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
>D [28/Feb/2023:19:46:13 -0500] [Job 477] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
>D [28/Feb/2023:19:46:13 -0500] [Job 477] rastertogutenprint.5.3 (application/vnd.cups-raster to printer/canon_selphy_cp1200, cost 100)
>D [28/Feb/2023:19:46:13 -0500] [Job 477] job-sheets=none,none
>D [28/Feb/2023:19:46:13 -0500] [Job 477] argv[0]="canon_selphy_cp1200"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] argv[1]="477"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] argv[2]="root"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] argv[3]="Test Page"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] argv[4]="1"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] argv[5]="job-uuid=urn:uuid:ee086df5-cac2-3a47-5721-e487c1c314d9 job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1677631573 time-at-processing=1677631573"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] argv[6]="/var/spool/cups/d00477-001"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[1]="CUPS_DATADIR=/usr/share/cups"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[2]="CUPS_DOCROOT=/usr/share/doc/cups"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[3]="CUPS_REQUESTROOT=/var/spool/cups"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[4]="CUPS_SERVERBIN=/usr/lib/cups"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[5]="CUPS_SERVERROOT=/etc/cups"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[6]="CUPS_STATEDIR=/run/cups"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[7]="HOME=/var/spool/cups/tmp"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[9]="SERVER_ADMIN=root@4void"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[10]="SOFTWARE=CUPS/2.4.2"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[11]="TMPDIR=/var/spool/cups/tmp"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[12]="USER=root"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[13]="CUPS_MAX_MESSAGE=2047"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[14]="CUPS_SERVER=/run/cups/cups.sock"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[15]="CUPS_ENCRYPTION=IfRequested"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[16]="IPP_PORT=631"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[17]="CHARSET=utf-8"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[18]="LANG=en_US.UTF-8"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[19]="PPD=/etc/cups/ppd/canon_selphy_cp1200.ppd"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[20]="CONTENT_TYPE=application/vnd.cups-pdf-banner"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[21]="DEVICE_URI=usb://Canon/SELPHY%20CP1200?serial=ZT15110600003044"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[22]="PRINTER_INFO=Canon SELPHY CP1200"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[23]="PRINTER_LOCATION=local"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[24]="PRINTER=canon_selphy_cp1200"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[25]="PRINTER_STATE_REASONS=none"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[26]="CUPS_FILETYPE=document"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[28]="AUTH_I****"
>I [28/Feb/2023:19:46:13 -0500] [Job 477] Started filter /usr/lib/cups/filter/bannertopdf (PID 15318)
>I [28/Feb/2023:19:46:13 -0500] [Job 477] Started filter /usr/lib/cups/filter/pdftopdf (PID 15319)
>I [28/Feb/2023:19:46:13 -0500] [Job 477] Started filter /usr/lib/cups/filter/gstoraster (PID 15320)
>I [28/Feb/2023:19:46:13 -0500] [Job 477] Started filter /usr/lib/cups/filter/rastertogutenprint.5.3 (PID 15321)
>I [28/Feb/2023:19:46:13 -0500] [Job 477] Started backend /usr/lib/cups/backend/usb (PID 15322)
>D [28/Feb/2023:19:46:13 -0500] Discarding unused job-state-changed event...
>D [28/Feb/2023:19:46:13 -0500] [Client 5] Returning IPP successful-ok for Print-Job (ipp://localhost:631/printers/canon_selphy_cp1200) from localhost.
>D [28/Feb/2023:19:46:13 -0500] [Client 5] Content-Length: 193
>D [28/Feb/2023:19:46:13 -0500] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
>D [28/Feb/2023:19:46:13 -0500] [Client 5] con->http=0x55ad51ac7c50
>D [28/Feb/2023:19:46:13 -0500] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=193, response=0x55ad51aa5580(IPP_STATE_IDLE), pipe_pid=0, file=-1
>D [28/Feb/2023:19:46:13 -0500] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
>D [28/Feb/2023:19:46:13 -0500] [Client 5] bytes=0, http_state=0, data_remaining=193
>D [28/Feb/2023:19:46:13 -0500] [Client 5] Flushing write buffer.
>D [28/Feb/2023:19:46:13 -0500] [Client 5] New state is HTTP_STATE_WAITING
>D [28/Feb/2023:19:46:13 -0500] [Client 5] Waiting for request.
>D [28/Feb/2023:19:46:13 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients and dirty files"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: REMOTE_USER=\"root\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.4.2\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: REMOTE_USER=\"root\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.4.2\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetArray: job_uri[0]=\"/jobs/477\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetArray: job_id[0]=\"477\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetArray: job_state[0]=\"3\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetArray: job_state_message[0]=\"\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetArray: job_state_reasons[0]=\"none\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: refresh_page=\"2;URL=/printers/canon_selphy_cp1200\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Gutenprint: 
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Gutenprint: ERROR: ***Gutenprint 5.3.4 assertion list != NULL failed! file print-list.c, line 212.  Please report this bug!
>D [28/Feb/2023:19:46:13 -0500] [Job 477] PID 15321 (/usr/lib/cups/filter/rastertogutenprint.5.3) crashed on signal 6.
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: TITLE=\"Print Test Page\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: REMOTE_USER=\"root\"
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.4.2\"
>D [28/Feb/2023:19:46:13 -0500] [Client 1] CGI data ready to be sent.
>D [28/Feb/2023:19:46:13 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:13 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=15317, file=18
>D [28/Feb/2023:19:46:13 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:13 -0500] [Client 1] Script header: Content-Type: text/html;charset=utf-8
>D [28/Feb/2023:19:46:13 -0500] [Client 1] Script header: 
>D [28/Feb/2023:19:46:13 -0500] [Client 1] Sending status 200 for CGI.
>D [28/Feb/2023:19:46:13 -0500] [Client 1] cupsdSendHeader: code=200, type="(null)", auth_type=0
>D [28/Feb/2023:19:46:13 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:13 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15317, file=18
>D [28/Feb/2023:19:46:13 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:13 -0500] [Client 1] CGI data ready to be sent.
>D [28/Feb/2023:19:46:13 -0500] [CGI] cgiSetVariable: PRINTER_NAME=\"canon_selphy_cp1200\"
>D [28/Feb/2023:19:46:13 -0500] [Client 5] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
>D [28/Feb/2023:19:46:13 -0500] [Client 5] Closing connection.
>D [28/Feb/2023:19:46:13 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
>D [28/Feb/2023:19:46:13 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:13 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15317, file=18
>D [28/Feb/2023:19:46:13 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:13 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:13 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15317, file=18
>D [28/Feb/2023:19:46:13 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Loading USB quirks from \"/usr/share/cups/usb\".
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Loaded 118 quirks.
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Printing on printer with URI: usb://Canon/SELPHY%20CP1200?serial=ZT15110600003044
>D [28/Feb/2023:19:46:13 -0500] [Job 477] pdftopdf: Last filter determined by the PPD: rastertogutenprint.5.3; FINAL_CONTENT_TYPE: application/vnd.cups-raster => pdftopdf will not log pages in page_log.
>D [28/Feb/2023:19:46:13 -0500] [Client 1] CGI data ready to be sent.
>D [28/Feb/2023:19:46:13 -0500] PID 15317 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
>D [28/Feb/2023:19:46:13 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:13 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15317, file=18
>D [28/Feb/2023:19:46:13 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:13 -0500] [Client 1] Sending 0-length chunk.
>D [28/Feb/2023:19:46:13 -0500] [Client 1] Flushing write buffer.
>D [28/Feb/2023:19:46:13 -0500] [Client 1] New state is HTTP_STATE_WAITING
>D [28/Feb/2023:19:46:13 -0500] [Client 1] Waiting for request.
>D [28/Feb/2023:19:46:13 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] PDF template file doesn\'t have form. It\'s okay.
>D [28/Feb/2023:19:46:13 -0500] [Job 477] OUTFORMAT=\"<none>\", so output format will be CUPS/PWG Raster
>D [28/Feb/2023:19:46:13 -0500] [Job 477] PID 15318 (/usr/lib/cups/filter/bannertopdf) exited with no errors.
>D [28/Feb/2023:19:46:13 -0500] [Job 477] PDF interactive form and annotation flattening done via QPDF
>D [28/Feb/2023:19:46:13 -0500] [Job 477] pdftopdf: \"print-scaling\" IPP attribute: auto
>D [28/Feb/2023:19:46:13 -0500] [Job 477] pdftopdf: Print scaling mode: Do not scale, center, crop if needed
>D [28/Feb/2023:19:46:13 -0500] [Job 477] After Cropping: 299.519989 449.279999 299.519989 449.279999
>D [28/Feb/2023:19:46:13 -0500] [Job 477] PID 15319 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Color Manager: Calibration Mode/Off
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Calling FindDeviceById(cups-canon_selphy_cp1200)
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Failed to send: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Failed to get find device cups-canon_selphy_cp1200
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Calling FindDeviceById(cups-canon_selphy_cp1200)
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Failed to send: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Failed to get device cups-canon_selphy_cp1200
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Color Manager: no profiles specified in PPD
>D [28/Feb/2023:19:46:13 -0500] Discarding unused job-progress event...
>D [28/Feb/2023:19:46:13 -0500] Discarding unused printer-state-changed event...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Color Manager: ICC Profile: None
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Ghostscript using Any-Part-of-Pixel method to fill paths.
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Ghostscript command line: gs -dQUIET -dSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -dShowAcroForm -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -r300x300 -dDEVICEWIDTHPOINTS=299 -dDEVICEHEIGHTPOINTS=449 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=1 -dcupsCompression=1 -scupsPageSizeName=Postcard -I/usr/share/cups/fonts -c \'<</.HWMargins[0.000000 0.000000 0.000000 0.000000] /Margins[0 0]>>setpagedevice\' -f -_
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[0]=\"CUPS_CACHEDIR=/var/cache/cups\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[1]=\"CUPS_DATADIR=/usr/share/cups\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[2]=\"CUPS_DOCROOT=/usr/share/doc/cups\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[3]=\"CUPS_REQUESTROOT=/var/spool/cups\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[4]=\"CUPS_SERVERBIN=/usr/lib/cups\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[5]=\"CUPS_SERVERROOT=/etc/cups\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[6]=\"CUPS_STATEDIR=/run/cups\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[7]=\"HOME=/var/spool/cups/tmp\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[8]=\"PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[9]=\"SERVER_ADMIN=root@4void\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[10]=\"SOFTWARE=CUPS/2.4.2\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[11]=\"TMPDIR=/var/spool/cups/tmp\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[12]=\"USER=root\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[13]=\"CUPS_MAX_MESSAGE=2047\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[14]=\"CUPS_SERVER=/run/cups/cups.sock\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[15]=\"CUPS_ENCRYPTION=IfRequested\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[16]=\"IPP_PORT=631\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[17]=\"CHARSET=utf-8\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[18]=\"LANG=en_US.UTF-8\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[19]=\"PPD=/etc/cups/ppd/canon_selphy_cp1200.ppd\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[20]=\"CONTENT_TYPE=application/vnd.cups-pdf-banner\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[21]=\"DEVICE_URI=usb://Canon/SELPHY%20CP1200?serial=ZT15110600003044\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[22]=\"PRINTER_INFO=Canon SELPHY CP1200\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[23]=\"PRINTER_LOCATION=local\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[24]=\"PRINTER=canon_selphy_cp1200\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[25]=\"PRINTER_STATE_REASONS=none\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[26]=\"CUPS_FILETYPE=document\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[27]=\"FINAL_CONTENT_TYPE=application/vnd.cups-raster\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] envp[28]=\"AUTH_INFO_REQUIRED=none\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] libusb_get_device_list=39
>D [28/Feb/2023:19:46:13 -0500] [Job 477] STATE: +connecting-to-device
>D [28/Feb/2023:19:46:13 -0500] cupsdMarkDirty(---J-)
>D [28/Feb/2023:19:46:13 -0500] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
>D [28/Feb/2023:19:46:13 -0500] Discarding unused printer-state-changed event...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] STATE: -connecting-to-device
>D [28/Feb/2023:19:46:13 -0500] cupsdMarkDirty(---J-)
>D [28/Feb/2023:19:46:13 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
>D [28/Feb/2023:19:46:13 -0500] Discarding unused printer-state-changed event...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Device protocol: 2
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Sending data to printer.
>D [28/Feb/2023:19:46:13 -0500] Discarding unused job-progress event...
>D [28/Feb/2023:19:46:13 -0500] Discarding unused printer-state-changed event...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Sent 0 bytes...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Start rendering...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Processing page 1...
>D [28/Feb/2023:19:46:13 -0500] Discarding unused job-progress event...
>D [28/Feb/2023:19:46:13 -0500] Discarding unused printer-state-changed event...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>E [28/Feb/2023:19:46:13 -0500] [Job 477] Unable to open raster stream - : Broken pipe
>D [28/Feb/2023:19:46:13 -0500] Discarding unused job-progress event...
>D [28/Feb/2023:19:46:13 -0500] Discarding unused printer-state-changed event...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] **** Error: Page drawing error occurred.
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Could not draw this page at all, page will be missing in the output.
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Rendering completed
>D [28/Feb/2023:19:46:13 -0500] Discarding unused job-progress event...
>D [28/Feb/2023:19:46:13 -0500] Discarding unused printer-state-changed event...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] PID 15320 (/usr/lib/cups/filter/gstoraster) exited with no errors.
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Waiting for read thread to exit...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Read 12 bytes of back-channel data...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] PID 15322 (/usr/lib/cups/backend/usb) exited with no errors.
>D [28/Feb/2023:19:46:13 -0500] Discarding unused job-state-changed event...
>E [28/Feb/2023:19:46:13 -0500] [Job 477] Job stopped due to filter errors; please consult the /var/log/cups/error_log file for details.
>D [28/Feb/2023:19:46:13 -0500] cupsdMarkDirty(---J-)
>D [28/Feb/2023:19:46:13 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
>D [28/Feb/2023:19:46:13 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
>D [28/Feb/2023:19:46:13 -0500] Discarding unused printer-state-changed event...
>D [28/Feb/2023:19:46:13 -0500] [Job 477] The following messages were recorded from 19:46:13 to 19:46:13
>D [28/Feb/2023:19:46:13 -0500] [Job 477] iSerialNumber=\"ZT15110600003044\"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] Printer found with device ID: MFG:Canon;CMD:Raster3;MDL:SELPHY CP1200;CLS:PRINTER;DES:Canon SELPHY CP1200;VER:1.00;CID:CA_YCC_ICP; Device URI: usb://Canon/SELPHY%20CP1200?serial=ZT15110600003044
>D [28/Feb/2023:19:46:13 -0500] [Job 477] End of messages
>D [28/Feb/2023:19:46:13 -0500] [Job 477] printer-state=3(idle)
>D [28/Feb/2023:19:46:13 -0500] [Job 477] printer-state-message="Rendering completed"
>D [28/Feb/2023:19:46:13 -0500] [Job 477] printer-state-reasons=none
>D [28/Feb/2023:19:46:14 -0500] [Job 477] Unloading...
>D [28/Feb/2023:19:46:15 -0500] [Client 1] GET /printers/canon_selphy_cp1200 HTTP/1.1
>D [28/Feb/2023:19:46:15 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Printing jobs and dirty files"
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Read: status=200, state=3
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Authorized as "root" using Basic.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Processing GET /printers/canon_selphy_cp1200
>D [28/Feb/2023:19:46:15 -0500] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/printers.cgi"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/doc/cups"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[3] = "CUPS_REQUESTROOT=/var/spool/cups"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[4] = "CUPS_SERVERBIN=/usr/lib/cups"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[5] = "CUPS_SERVERROOT=/etc/cups"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[6] = "CUPS_STATEDIR=/run/cups"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[7] = "HOME=/var/spool/cups/tmp"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[8] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[9] = "SERVER_ADMIN=root@4void"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[10] = "SOFTWARE=CUPS/2.4.2"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[11] = "TMPDIR=/var/spool/cups/tmp"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[12] = "USER=root"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[13] = "CUPS_MAX_MESSAGE=2047"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[14] = "CUPS_SERVER=/run/cups/cups.sock"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[16] = "IPP_PORT=631"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[17] = "AUTH_TYPE=Basic"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[18] = "LANG=en_US.UTF8"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[19] = "REDIRECT_STATUS=1"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[21] = "SERVER_NAME=localhost"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[22] = "SERVER_PORT=631"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[24] = "REMOTE_HOST=localhost"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[25] = "SCRIPT_NAME=/printers/canon_selphy_cp1200"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/doc/cups/printers/canon_selphy_cp1200"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[27] = "PATH_INFO=/canon_selphy_cp1200"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[28] = "REMOTE_USER=root"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[29] = "SERVER_PROTOCOL=HTTP/1.1"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[30] = "HTTP_COOKIE=org.cups.sid=dc588e31213b6af2038380c9852a5026"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[31] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/110.0.0.0 Safari/537.36"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[32] = "HTTP_REFERER=http://localhost:631/printers/canon_selphy_cp1200"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[33] = "REQUEST_METHOD=GET"
>D [28/Feb/2023:19:46:15 -0500] [CGI] envp[34] = "QUERY_STRING="
>D [28/Feb/2023:19:46:15 -0500] cupsdAddCert: Adding certificate for PID 15332
>D [28/Feb/2023:19:46:15 -0500] [CGI] Started /usr/lib/cups/cgi-bin/printers.cgi (PID 15332)
>I [28/Feb/2023:19:46:15 -0500] [Client 1] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=15332, file=18)
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [CGI] org.cups.sid cookie is \"dc588e31213b6af2038380c9852a5026\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: SECTION=\"printers\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: PRINTER_NAME=\"canon_selphy_cp1200\"
>D [28/Feb/2023:19:46:15 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Server address is "/run/cups/cups.sock".
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Accepted from localhost (Domain)
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Waiting for request.
>D [28/Feb/2023:19:46:15 -0500] [Client 6] POST / HTTP/1.1
>D [28/Feb/2023:19:46:15 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Read: status=200, state=6
>D [28/Feb/2023:19:46:15 -0500] [Client 6] No authentication data provided.
>D [28/Feb/2023:19:46:15 -0500] [Client 6] 2.0 CUPS-Get-Default 1
>D [28/Feb/2023:19:46:15 -0500] CUPS-Get-Default
>D [28/Feb/2023:19:46:15 -0500] CUPS-Get-Default client-error-not-found: No default printer.
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost.
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Content-Length: 113
>D [28/Feb/2023:19:46:15 -0500] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
>D [28/Feb/2023:19:46:15 -0500] [Client 6] con->http=0x55ad51acd360
>D [28/Feb/2023:19:46:15 -0500] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=113, response=0x55ad51aa5580(IPP_STATE_DATA), pipe_pid=0, file=-1
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
>D [28/Feb/2023:19:46:15 -0500] [Client 6] bytes=0, http_state=0, data_remaining=113
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Flushing write buffer.
>D [28/Feb/2023:19:46:15 -0500] [Client 6] New state is HTTP_STATE_WAITING
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Waiting for request.
>D [28/Feb/2023:19:46:15 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
>D [28/Feb/2023:19:46:15 -0500] [CGI] show_printer(http=0x559bea92bea0, printer=\"canon_selphy_cp1200\")
>D [28/Feb/2023:19:46:15 -0500] [Client 6] POST / HTTP/1.1
>D [28/Feb/2023:19:46:15 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Read: status=200, state=6
>D [28/Feb/2023:19:46:15 -0500] [Client 6] No authentication data provided.
>D [28/Feb/2023:19:46:15 -0500] [Client 6] 2.0 Get-Printer-Attributes 2
>D [28/Feb/2023:19:46:15 -0500] Get-Printer-Attributes ipp://localhost/printers/canon_selphy_cp1200
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/canon_selphy_cp1200) from localhost.
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Content-Length: 692
>D [28/Feb/2023:19:46:15 -0500] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
>D [28/Feb/2023:19:46:15 -0500] [Client 6] con->http=0x55ad51acd360
>D [28/Feb/2023:19:46:15 -0500] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=692, response=0x55ad51a984d0(IPP_STATE_DATA), pipe_pid=0, file=-1
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
>D [28/Feb/2023:19:46:15 -0500] [Client 6] bytes=0, http_state=0, data_remaining=692
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Flushing write buffer.
>D [28/Feb/2023:19:46:15 -0500] [Client 6] New state is HTTP_STATE_WAITING
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Waiting for request.
>D [28/Feb/2023:19:46:15 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: REMOTE_USER=\"root\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.4.2\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: REMOTE_USER=\"root\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.4.2\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: printer_is_accepting_jobs[0]=\"1\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: printer_is_shared[0]=\"1\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: printer_state[0]=\"3\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: admin_uri[0]=\"/admin/\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: printer_uri_supported[0]=\"/printers/canon_selphy_cp1200\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: printer_name[0]=\"canon_selphy_cp1200\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: printer_location[0]=\"local\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: printer_info[0]=\"Canon SELPHY CP1200\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: job_sheets_default[0]=\"none, none\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: device_uri[0]=\"usb://Canon/SELPHY%20CP1200?serial=ZT15110600003044\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: color_supported[0]=\"1\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: printer_make_and_model[0]=\"Canon SELPHY CP1200 - CUPS+Gutenprint v5.3.4 Simplified\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: media_default[0]=\"custom_105.66x158.5mm_105.66x158.5mm\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: sides_supported[0]=\"one-sided\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: sides_default[0]=\"one-sided\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: printer_commands[0]=\"none\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: server_is_sharing_printers[0]=\"1\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: TITLE=\"canon_selphy_cp1200\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: REMOTE_USER=\"root\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.4.2\"
>D [28/Feb/2023:19:46:15 -0500] [Client 1] CGI data ready to be sent.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Script header: Content-Type: text/html;charset=utf-8
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Script header: 
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Sending status 200 for CGI.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdSendHeader: code=200, type="(null)", auth_type=0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] CGI data ready to be sent.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [CGI] Regular expression \".*Clean.*\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] Regular expression \".*PrintSelfTestPage.*\"
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] CGI data ready to be sent.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] CGI data ready to be sent.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 6] POST / HTTP/1.1
>D [28/Feb/2023:19:46:15 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Read: status=200, state=6
>D [28/Feb/2023:19:46:15 -0500] [Client 6] No authentication data provided.
>D [28/Feb/2023:19:46:15 -0500] [Client 6] 2.0 Get-Jobs 3
>D [28/Feb/2023:19:46:15 -0500] Get-Jobs ipp://localhost:631/printers/canon_selphy_cp1200
>D [28/Feb/2023:19:46:15 -0500] [Job 477] Loading attributes...
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/canon_selphy_cp1200) from localhost.
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Content-Length: 390
>D [28/Feb/2023:19:46:15 -0500] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
>D [28/Feb/2023:19:46:15 -0500] [Client 6] con->http=0x55ad51acd360
>D [28/Feb/2023:19:46:15 -0500] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=390, response=0x55ad51a9aa70(IPP_STATE_DATA), pipe_pid=0, file=-1
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
>D [28/Feb/2023:19:46:15 -0500] [Client 6] bytes=0, http_state=0, data_remaining=390
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Flushing write buffer.
>D [28/Feb/2023:19:46:15 -0500] [Client 6] New state is HTTP_STATE_WAITING
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Waiting for request.
>D [28/Feb/2023:19:46:15 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiClearVariables called.
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: SECTION=\"printers\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: TOTAL=\"1\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: REMOTE_USER=\"root\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.4.2\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: job_preserved[0]=\"1\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: job_printer_name[0]=\"canon_selphy_cp1200\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: job_printer_uri[0]=\"/printers/canon_selphy_cp1200\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: time_at_completed[0]=\"novalue\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: time_at_creation[0]=\"Tue 28 Feb 2023 07:46:13 PM EST\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: time_at_processing[0]=\"Tue 28 Feb 2023 07:46:13 PM EST\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: job_id[0]=\"477\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: job_state[0]=\"6\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: job_impressions_completed[0]=\"0\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: job_k_octets[0]=\"1\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: job_hold_until[0]=\"no-hold\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetArray: job_printer_state_message[0]=\"Filter failed\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: PRINTER_NAME=\"canon_selphy_cp1200\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: PRINTER_URI_SUPPORTED=\"/printers/canon_selphy_cp1200\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: THISURL=\"/printers/canon_selphy_cp1200\"
>D [28/Feb/2023:19:46:15 -0500] [CGI] cgiSetVariable: SEARCH_DEST=\"canon_selphy_cp1200\"
>D [28/Feb/2023:19:46:15 -0500] [Client 1] CGI data ready to be sent.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] CGI data ready to be sent.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] CGI data ready to be sent.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] CGI data ready to be sent.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] CGI data ready to be sent.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] CGI data ready to be sent.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 6] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
>D [28/Feb/2023:19:46:15 -0500] [Client 6] Closing connection.
>D [28/Feb/2023:19:46:15 -0500] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] CGI data ready to be sent.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] con->http=0x55ad51ac0fb0
>D [28/Feb/2023:19:46:15 -0500] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=15332, file=18
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for CGI data.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Sending 0-length chunk.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Flushing write buffer.
>D [28/Feb/2023:19:46:15 -0500] [Client 1] New state is HTTP_STATE_WAITING
>D [28/Feb/2023:19:46:15 -0500] [Client 1] Waiting for request.
>D [28/Feb/2023:19:46:15 -0500] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
>D [28/Feb/2023:19:46:15 -0500] PID 15332 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.

Re: [Gimp-print-devel] Gutenprint 5.3.3 on OS 13?

[Matt B. <wal...@ma...>]

> On Dec 30, 2022, at 11:43 AM, Dan Hankin <dh...@co...> wrote:
> 
> Hi again,
> 
> I just installed Gutenprint 5.3.3. 
> 
> When I try to print, the window says “no printer selected", and the “print” button is dimmed out, so I can’t print.
> 
> My computer doesn’t recognize my printer - but the same was true when I used Gutenprint with my previous OS - and everything worked.
> 
> Any ideas or suggestions would be appreciated.  Thanks.
> 
> 
> 
> Hi,
> 
> I’ve been using Gutenprint 5.3.3 on my Mac for my Canon MX860 printer. Worked great..
> 
> I erased the hard drive and installed OS Ventura 13.1 and now I’d like to use Gutenprint 5.3.3 on the new system.
> 
> Can I just download and install it?
> 

I don't have macos 13.1 installed, but I would think that Gutenprint should work.  In macos 12.6.1 Monterey, I added a file printer using the Canon MX860 driver.  I did not experience the dimmed out Print button.  I would suggest that you use the System Preferences ---> Printers & Scanners, delete any print queue you already have for the MX860 and add the printer again.

If you are using one of the newer computers that has the M1 or M2 chipset, you will need to have Rosetta installed.  Gutenprint is a set of drivers and not an application so you would not be prompted to add Rosetta.  You would need to install Rosetta using the Terminal (Applications/Utilities/Terminal.app.  Enter 
sudo /usr/sbin/softwareupdate --install-rosetta --agree-to-license and hit Enter

Enter you administrator's password when asked and hit Enter.  Nothing will appear on the screen as you type it.  

I hope this resolves your issue.

Matt

[Gimp-print-devel] Gutenprint 5.3.3 on OS 13?

[Dan H. <dh...@co...>]

Hi again,

I just installed Gutenprint 5.3.3. 

When I try to print, the window says “no printer selected", and the “print” button is dimmed out, so I can’t print.

My computer doesn’t recognize my printer - but the same was true when I used Gutenprint with my previous OS - and everything worked.

Any ideas or suggestions would be appreciated.  Thanks.



Hi,

I’ve been using Gutenprint 5.3.3 on my Mac for my Canon MX860 printer. Worked great..

I erased the hard drive and installed OS Ventura 13.1 and now I’d like to use Gutenprint 5.3.3 on the new system.

Can I just download and install it?

Thanks!

Dan

[Gimp-print-devel] Gutenprint 5.3.3 on OS 13?

[Dan H. <dh...@co...>]

Hi,

I’ve been using Gutenprint 5.3.3 on my Mac for my Canon printer. Worked great..

I erased the hard drive and installed OS Ventura 13.1 and now I’d like to use Gutenprint 5.3.3 on the new system.

Can I just download and install it?

Thanks!

Dan

Re: [Gimp-print-devel] PKG_LIB_DIR/PKGMODULEDIR expansion issues

[Matsumura, G. <gm9...@oh...>]

On 7/20/22 17:34, Robert Krawitz wrote:
> I'll take a look at it.

I apologize for the noise, but is there anything I could do to improve
these changes or aid with their review? I have re-attached the most
recent versions of the patches to this email, please let me know if you
have any questions.

Thank you,
    George