At this point I don't think that the Gutenprint drivers can handle those paper sizes. The PPD can only produce the page sizes listed. Also, I see that Custom page sizes are not available.
Robert, the OpenPrinting site shows that the Savin 4075 can use the Savin PXL driver which contains both the requested sizes -- Fanfold German Legal and Statement. Getting Foomatic and Ghostscript on the Mac is very difficult as there are a lot of dependencies that have to be met befor the source code is compiled. Is it possible to add these sizes or to allow Custom Sizes for Gutenprint? I don't know if this is possible without a PCL maintainer. The OpenPrinting PPD can be viewed at: http://www.openprinting.org/ppd-o-matic.php?driver=pxlmono-Savin&printer=Savin-4075&show=1
Matt
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi.
with pxlmono, yes it prints in size 8 1/2 x 13, but pxlmono old this prints very slow aprox.10 min for a single image. with the new pxlmono it prints very fast although if I rotate the image to print, the sheet comes out blank, ", only if I turn it".
If I delete "-dNOINTERPOLATE in FoomaticRIPCommandLine" it prints fast though again if I rotate the image the sheet goes blank, only if I turn it.
Am I lost in something? Thank you.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I do seem to recall that there was slowness with pxl drivers using foomatic-rip and ghostscript. I do note your post abrout a Ricoh printer with the same problem on the OpenPringing site. I cited the PPD from OpenPrinting only to show what Savin says the printer can do. All that said, the Gutenprint site does not support anything other than Gutenprint. I am sorry that the Gutenprint drivers cannot meet your needs at present.
Matt
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi.
I need help:
Download Gutenprint-5.2.12 for Mac Saw. 10.14 and I need to print on 4075 savin in 8.5x13 size but I have not been able, the 4075 savin indicates 8.5x14.
I have modified the ppd in / private / etc / cups / ppd and I have attached the 8.5x13 size in 4 parts:
OpenUI * PageSize / Media Size: PickOne
OPOptionHints PageSize: "dropdown"
OrderDependency: 10 AnySetup * PageSize
StpStpPageSize: 0 1 2 0 255 0.000 0.000 0.000
DefaultPageSize: Letter
StpDefaultPageSize: Letter
PageSize Letter / Letter: "<< / PageSize [612 792] / ImagingBBox null >> setpagedevice"
PageSize Legal / Legal: "<< / PageSize [612 1008] / ImagingBBox null >> setpagedevice"
PageSize 8.5x13 / 8 1 / 2x13: "<< / PageSize [612 936] / ImagingBBox null >> setpagedevice"
OpenUI * PageRegion / Media Size: PickOne
OPOptionHints PageRegion: "dropdown"
OrderDependency: 10 AnySetup * PageRegion
DefaultPageRegion: Letter
StpDefaultPageRegion: Letter
PageRegion Letter / Letter: "<< / PageSize [612 792] / ImagingBBox null >> setpagedevice"
PageRegion Legal / Legal: "<< / PageSize [612 1008] / ImagingBBox null >> setpagedevice"
PageRegion 8.5x13 / 8 1 / 2x13: "<< / PageSize [612 936] / ImagingBBox null >> setpagedevice"
DefaultImageableArea: Letter
StpDefaultImageableArea: Letter
ImageableArea Letter / Letter: "18 12 594 780"
ImageableArea Legal / Legal: "18 12 594 996"
ImageableArea 8.5x13 / 8 1 / 2x13: "18 12 594 924"
DefaultPaperDimension: Letter
StpDefaultPaperDimension: Letter
PaperDimension Letter / Letter: "612 792"
PaperDimension Legal / Legal: "612 1008"
PaperDimension 8.5x13 / 8 1 / 2x13: "612 936"
I'm lost, I appreciate some help.
I'm lost .
No help here?
Where?
Thank you.
At this point I don't think that the Gutenprint drivers can handle those paper sizes. The PPD can only produce the page sizes listed. Also, I see that Custom page sizes are not available.
Robert, the OpenPrinting site shows that the Savin 4075 can use the Savin PXL driver which contains both the requested sizes -- Fanfold German Legal and Statement. Getting Foomatic and Ghostscript on the Mac is very difficult as there are a lot of dependencies that have to be met befor the source code is compiled. Is it possible to add these sizes or to allow Custom Sizes for Gutenprint? I don't know if this is possible without a PCL maintainer. The OpenPrinting PPD can be viewed at:
http://www.openprinting.org/ppd-o-matic.php?driver=pxlmono-Savin&printer=Savin-4075&show=1
Matt
Hi.
with pxlmono, yes it prints in size 8 1/2 x 13, but pxlmono old this prints very slow aprox.10 min for a single image. with the new pxlmono it prints very fast although if I rotate the image to print, the sheet comes out blank, ", only if I turn it".
If I delete "-dNOINTERPOLATE in FoomaticRIPCommandLine" it prints fast though again if I rotate the image the sheet goes blank, only if I turn it.
Am I lost in something? Thank you.
I do seem to recall that there was slowness with pxl drivers using foomatic-rip and ghostscript. I do note your post abrout a Ricoh printer with the same problem on the OpenPringing site. I cited the PPD from OpenPrinting only to show what Savin says the printer can do. All that said, the Gutenprint site does not support anything other than Gutenprint. I am sorry that the Gutenprint drivers cannot meet your needs at present.
Matt