Program PIC 32 bit PIC32MX795F512H

Brought to you by: evanvennn, great-cow-basic, kent_twt4, w_cholmondeley

Program PIC 32 bit PIC32MX795F512H

Forum: Programmers and Chip Files Problems

Created: 2021-09-29

Updated: 2021-09-30

Gigi - 2021-09-29

I should reprogram this PIC it is an old MAXIMITE project, unfortunately its bootloader does not work and I can not update the MMbasic, I should reload at least the bootloader. With PicKit3 you can not recognize the device, it seems that this programmer is not good with PIC 32bit, how can I do?

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Anobium - 2021-09-30

Not a Great Cow BASIC question. You sure you have the correct forum?

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Gigi - 2021-09-30

I can't find any information like doing it in a simple way without having to buy other programmers, I only need it once. I thought someone in this forum maybe had a similar problem. Thank you, sorry for the trouble.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- Anobium - 2021-09-30
  
  What programmers do you have?
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Gigi - 2021-09-30

I have the PicKit2 and also PicKit3, all work fine on 8bit 12F-16F-18F pics.
I suspect that you need to download another software on the PicKit for pic 16 and 32bit.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Anobium - 2021-09-30

Load up MPLAB-IPE, put PK3 into MPLAB mode. Use....

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Gigi - 2021-09-30

Where can I find MPLAB-IPE ? you have to download everything MPLABX ?

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- Anobium - 2021-09-30
  
  Microchip website - it is free!
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Gigi - 2021-09-30

OK, I had already tried and did not recognize the PicKit3. I'll see if I can reinstall the latest MPLAB.
Thank you

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- Anobium - 2021-09-30
  
  Put the PK3 in MPLAB mode in the Windows GUI application. And, power the chip.
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Gigi - 2021-09-30

Exactly the problem was just that, put in MPLAB mode it worked immediately I finally programmed my PIC32. Thanks for everything

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Anobium - 2021-09-30

pleasure

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.