The display is a 320 x 480 Color TFT. The driver supports the 8bit bus mode now and SPI! Puls all the Great Cow BASIC commands for GLCD and Rotate etc with support for both legacy and OLED fonts!
The GLCD tested are a 2.4 Inch 320 x 480 , color TFT LCD with an 8 bit data bus and a 3.0 Inch with SPI.
Suitable for PIC and AVR with SPI requiring 6 ports
Currently only AVR for the the 8 bit bus support. This support software data transfer requiring 13 ports in total.
Typically operates at VCC 5 but always check voltage specifications.
A Very nice display for cost and performance
You will need to update your system with an updated GLCD and the new library.
Enjoy.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
The display is a 320 x 480 Color TFT. The driver supports the 8bit bus mode now and SPI! Puls all the Great Cow BASIC commands for GLCD and Rotate etc with support for both legacy and OLED fonts!
The GLCD tested are a 2.4 Inch 320 x 480 , color TFT LCD with an 8 bit data bus and a 3.0 Inch with SPI.
Suitable for PIC and AVR with SPI requiring 6 ports
Currently only AVR for the the 8 bit bus support. This support software data transfer requiring 13 ports in total.
Typically operates at VCC 5 but always check voltage specifications.
A Very nice display for cost and performance
You will need to update your system with an updated GLCD and the new library.
Enjoy.
To support this library there a few demos posted to GitHub,
See https://github.com/Anobium/Great-Cow-BASIC-Demonstration-Sources/tree/master/GLCD_Solutions/GLCD_Simple_Demonstration_Solutions