I think is a Constant or method exposed in the AMS OSRAM APPLICATION.
So, I would email support and ask, and, at the same dowload all the Application Notes and the software to have a search through all the sources. Then, search GitHub for other solutions to see if this refered to.
Good luck.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I'm using a TMF8820 dToF chip.
The data sheet uses RW, RO and R_PUSH.
I know what the first two mean but does anyone know what R_PUSH means?
Where are you seeing R_PUSH ? which document or picture? Got a URL?
In the data sheet downloaded from this site:
https://ams.com/en/tmf8820
See pages 44 and 45 for the ENABLE register and the INT_STATUS register.
I think is a Constant or method exposed in the AMS OSRAM APPLICATION.
So, I would email support and ask, and, at the same dowload all the Application Notes and the software to have a search through all the sources. Then, search GitHub for other solutions to see if this refered to.
Good luck.
Thanks!
Here is the manufacturer's description of R_PUSH:
With R_PUSH we refer to a register, which has exact control which bits actually are cleared - only these bits are reset where a ‘1’ is written.