NT7107 GLCD

Brought to you by: evanvennn, great-cow-basic, kent_twt4, w_cholmondeley

NT7107 GLCD

Forum: Help

Created: 2023-01-26

Updated: 2023-01-26

Mikam - 2023-01-26

Hi
Would you be able to add the driver for NT7107.? (Farnell 267-5697).
Thanks

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Anobium - 2023-01-26

I think that will work already. But, why not buy one that has a driver? Like a standard GLCD.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Mikam - 2023-01-26

Just have one to use. I shall do as you have advised.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Anobium - 2023-01-26

Do try the standard GCLD library.

There are many demos in the folder: https://github.com/GreatCowBASIC/Demonstration_Sources/tree/main/GLCD_Solutions/GLCD_Simple_Demonstration_Solutions

but, this is good start - these are in the demonstration installation within your installation, see
https://github.com/GreatCowBASIC/Demonstration_Sources/blob/main/GLCD_Solutions/GLCD_Simple_Demonstration_Solutions/GLCD_Simple_Demonstation_16F1939_for_NT7108C%4032.gcb

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.