You want the complete package; you want a complete installation of the IDE and GCGB.
This is the latest build with the Great Cow Basic compiler, the IDE and Great Cow Basic. This is a complete package. Contains demonstrations and seven microprocessor programmers (including the command line tools and GUI tools for the Microchip Pickit 2 & 3) for Microchip and AVR microprocessors.
This release will include the complete build shown above, a minimal build, a core build, a GCGB build, MacOS, BSD Linux and a standard Linux build.
Enjoy
Last edit: Anobium 2019-06-12
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
The Great Cow BASIC development team have published another release that further enhances the Great Cow BASIC toolset capabilities.
This release is called V0.98.06. This release introduces many new capabilities as follows, read the release note as there are 100 changes in this release.
For the full list of the 100 changes see the release_list.txt file in the GreatCowBASIC folder.
Evan
Compiler
Further performance enhancements - the compiler is faster.
Fixed maths, variables naming, calculation can set bits, revision of the default config to improve useability, critical fixes for K42 and K8 MCUs, wait 1 m now waits 1 m, improve DIMension of variables, fix for incorrect usage of temp variables, banksel optimisation and optimisation of ENDIFs .
Quality improvements in the generated ASM – by the removal of unnecessary commentary.
Millis
Millis library introduced
PPSTool
New XLM files added
Device Files
New devices added
Refreshed all devices to support new capabilities: Stacks, UserIDs
IDE
-Instruction set improvements to the IDE lexer
ADC
Library updated to support AN2
Help
Updated for new capabilities and improvements
GLCD
Updated libraries – OLED fonts, Touch added, addition of HWI2C, improved SPI support and lots more.
SPI
Improved support for mode by use of user constant.
Major revision of the K42 MCUs
DS18X20
Quality improvements in the generated ASM – by the removal of unnecessary commentary.
The file is like this: Change Number, type, scope, nice words. As example is shown below:
585 New GLCD SDD1289 library updated for OLED fonts and improvements to GLCDPrint methods [855, 874]
585 - the change number
New - a new capability
GLCD - impacts the GLCD library or libraries
Word - this is a change to add OLED fonts and improve GLCDPrint methods to support OLED fonts. [855, 874] - these are the SVN commit numbers into SourceForge
You cannot, and should not, selectively use files from the v0.98.06 release with any other version of Great Cow BASIC before v0.98.06
So, please keep the release consistent in terms of the build.
If you are adapting the build for your own needs then there are lots of methods to keep the build consistent and enable you to customise – there postings in the forum on how to accomplish this.
Anobium
Last edit: Anobium 2019-06-12
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Great Cow BASIC v0.98.06
Simply select the link below to download the latest release of Great Cow BASIC.
Great Cow BASIC IDE v0.98.06 click here to download GCB_Installer v0.98.06
You want the complete package; you want a complete installation of the IDE and GCGB.
This is the latest build with the Great Cow Basic compiler, the IDE and Great Cow Basic. This is a complete package. Contains demonstrations and seven microprocessor programmers (including the command line tools and GUI tools for the Microchip Pickit 2 & 3) for Microchip and AVR microprocessors.
This release will include the complete build shown above, a minimal build, a core build, a GCGB build, MacOS, BSD Linux and a standard Linux build.
Enjoy
Last edit: Anobium 2019-06-12
Updated 22.April.2019
The Great Cow BASIC development team have published another release that further enhances the Great Cow BASIC toolset capabilities.
This release is called V0.98.06. This release introduces many new capabilities as follows, read the release note as there are 100 changes in this release.
For the full list of the 100 changes see the release_list.txt file in the GreatCowBASIC folder.
Evan
Compiler
Millis
PPSTool
Device Files
IDE
-Instruction set improvements to the IDE lexer
ADC
Help
GLCD
SPI
DS18X20
Hints and Tips
The previous set of hints and tips are still very good. See https://sourceforge.net/p/gcbasic/discussion/579125/thread/7fae77a3/
Enjoy
Last edit: Anobium 2019-06-12
The realease list for v0.98.06 is attached.
The file is like this: Change Number, type, scope, nice words. As example is shown below:
585 New GLCD SDD1289 library updated for OLED fonts and improvements to GLCDPrint methods [855, 874]585 - the change number
New - a new capability
GLCD - impacts the GLCD library or libraries
Word - this is a change to add OLED fonts and improve GLCDPrint methods to support OLED fonts.
[855, 874] - these are the SVN commit numbers into SourceForge
Enjoy reading the 100s of changed.
Last edit: Anobium 2019-06-12
Please note
You cannot, and should not, selectively use files from the v0.98.06 release with any other version of Great Cow BASIC before v0.98.06
So, please keep the release consistent in terms of the build.
If you are adapting the build for your own needs then there are lots of methods to keep the build consistent and enable you to customise – there postings in the forum on how to accomplish this.
Anobium
Last edit: Anobium 2019-06-12
Finally,
Do not reply to this posting.
If you want to comment, or make a comment relative to these postings or the release - create a new posting.
PLEASE DO NOT HIJAAK THIS THREAD CREATE A NEW THREAD TO DISCUSS
Anobium