Correction to my previous - 1K. Still very large compared to Tinybld.
-------- Original message --------
From: joe rocci jdrocci@users.sf.net
Date: 12/23/2017 2:01 PM (GMT-05:00)
To: "[gcbasic:discussion]" 579125@discussion.gcbasic.p.re.sf.net
Subject: [gcbasic:discussion] RE: [gcbasic:discussion] RE: [gcbasic:discussion] wot's low voltage programming
Yes, some bootloaders (Miicrochip's for instance), use up to 4K. Tiny, on the other hand, uses only 100.
-------- Original message --------
From: stan cartwright stanleyella@users.sf.net
Date: 12/23/2017 1:04 PM (GMT-05:00)
To: "[gcbasic:discussion]" 579125@discussion.gcbasic.p.re.sf.net
Subject: [gcbasic:discussion] RE: [gcbasic:discussion] wot's low voltage programming
Which isn't the same as ".On the other hand, the B/L requires 100-4K of dedicated program memory and requires a serial port. " as you said. 4K?! Thing is I use icsp for pic and just pickit2 so plain sailing for moi now. As for avr, I use the arduino 328 bootloader as I use uno and nano. I don't know how to program 328 icsp or how big the bootloader is. Don't care either for now. It just works and I don't want to break it.
RE: [gcbasic:discussion] wot's low voltage programming
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/gcbasic/discussion/579125/
Correction to my previous - 1K. Still very large compared to Tinybld.
-------- Original message --------
From: joe rocci jdrocci@users.sf.net
Date: 12/23/2017 2:01 PM (GMT-05:00)
To: "[gcbasic:discussion]" 579125@discussion.gcbasic.p.re.sf.net
Subject: [gcbasic:discussion] RE: [gcbasic:discussion] RE: [gcbasic:discussion] wot's low voltage programming
Yes, some bootloaders (Miicrochip's for instance), use up to 4K. Tiny, on the other hand, uses only 100.
-------- Original message --------
From: stan cartwright stanleyella@users.sf.net
Date: 12/23/2017 1:04 PM (GMT-05:00)
To: "[gcbasic:discussion]" 579125@discussion.gcbasic.p.re.sf.net
Subject: [gcbasic:discussion] RE: [gcbasic:discussion] wot's low voltage programming
Which isn't the same as ".On the other hand, the B/L requires 100-4K of dedicated program memory and requires a serial port. " as you said. 4K?! Thing is I use icsp for pic and just pickit2 so plain sailing for moi now. As for avr, I use the arduino 328 bootloader as I use uno and nano. I don't know how to program 328 icsp or how big the bootloader is. Don't care either for now. It just works and I don't want to break it.
RE: [gcbasic:discussion] wot's low voltage programming
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/gcbasic/discussion/579125/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
[RE: [gcbasic:discussion] RE: [gcbasic:discussion] wot's low voltage
programming](https://sourceforge.net/p/gcbasic/discussion/579125/thread/5746c7d5/?limit=25#d127)
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/gcbasic/discussion/579125/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/