Simply select the link below to download the latest release of Great Cow BASIC.
Great Cow BASIC IDE v0.98.02
You want the complete package; you want a complete installation of the IDE and GCGB.
This is the latest build with the Great Cow Basic compiler, the IDE and Great Cow Basic. This is a complete package. Contains demonstrations and seven microprocessor programmers (including the command line tools and GUI tools for the Microchip Pickit 2 & 3) for Microchip and AVR microprocessors.
The Great Cow BASIC development team have published another release that further enhances the Great Cow BASIC toolset capabilities.
This release is called V0.98.02. This release introduces many new capabilities as follows, read the release note as there are nearly 100 changes in this release.
Improved Programming
New support for programming capabilities and a new GUI utility to control programmers over 29 programmers now supported.
New and updated PWM
New PWM16 support. Library for the new Microchip 16bit PWM modules
Updates to Harware PWM upadate to improve performance
Updates to issue warning when clock speed is too low
Updated Compiler
Lots of improvements including introduction of floating point
New and updated GLCD Support
New HX8347 library
New SSD1331 library
New Nextion library
Improved PCD8544 memory handling
Improved ILI9341 library
New support for GLCDPrintString, GLCDPrintStringLN and GLCDLocateString
New Max7219 support
New Max7219_LEDMATRIX_Driver library
Updated PPSTool
- Updated to latest XML files
New and updated DS18B20
- New library to support multiple ports
New Configurable Logic Cell
Inclusion of Microchip's CLC Designer
Enjoy
Last edit: Anobium 2018-05-13
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
You cannot, and should not, selectively use files from the v0.98.02 release with any other version of Great Cow BASIC before v0.98.02
So, please keep the release consistent in terms of the build.
If you are adapting the build for your own needs then there are lots of methods to keep the build consistent and enable you to customise – there postings in the forum on how to accomplish this.
Anobium
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
When installing this version of Great Cow BASIC v0.98.02. You should not install the software into the 'program files' or any sub-director folder where you need administrative rights. You will get error messages issues if you are not an computer Administrator.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Great Cow BASIC is v0.98.02 released.
Simply select the link below to download the latest release of Great Cow BASIC.
Great Cow BASIC IDE v0.98.02
You want the complete package; you want a complete installation of the IDE and GCGB.
This is the latest build with the Great Cow Basic compiler, the IDE and Great Cow Basic. This is a complete package. Contains demonstrations and seven microprocessor programmers (including the command line tools and GUI tools for the Microchip Pickit 2 & 3) for Microchip and AVR microprocessors.
Download Great Cow BASIC IDE v0.98.02 here
This release includes the complete build shown above, a minimal build, a core build, a GCGB build and the Linux build.
Enjoy
Last edit: Anobium 2018-11-11
The Great Cow BASIC development team have published another release that further enhances the Great Cow BASIC toolset capabilities.
This release is called V0.98.02. This release introduces many new capabilities as follows, read the release note as there are nearly 100 changes in this release.
Improved Programming
New and updated PWM
Updated Compiler
New and updated GLCD Support
New Max7219 support
Updated PPSTool
- Updated to latest XML files
New and updated DS18B20
- New library to support multiple ports
New Configurable Logic Cell
Inclusion of Microchip's CLC Designer
Enjoy
Last edit: Anobium 2018-05-13
**Please note **
You cannot, and should not, selectively use files from the v0.98.02 release with any other version of Great Cow BASIC before v0.98.02
So, please keep the release consistent in terms of the build.
If you are adapting the build for your own needs then there are lots of methods to keep the build consistent and enable you to customise – there postings in the forum on how to accomplish this.
Anobium
Finally,
Do not reply to this posting.
If you want to comment, or make a comment relative to these postings or the release - create a new posting.
PLEASE DO NOT HIJAAK THIS THREAD
Anobium
Please note
When installing this version of Great Cow BASIC v0.98.02. You should not install the software into the 'program files' or any sub-director folder where you need administrative rights. You will get error messages issues if you are not an computer Administrator.