My project is to port a DC motor controller which I have completed using a Picaxe chip.
The Picaxe solution has the following characterics:
Controls two DC motors via L293D
Bi-directional control
Each motor is controller independently for speed using different PWM frequencies
EMF feedback used to ensure motor is at correct speed and to adjustment to ensure each wheel is at the same speed
During my porting I have hit an issue the PWM functionality. I need two PWM signals that background PWM operations and are independent in terms of frequency.
I need to have two different freq/durations.
Does GCB support background software PWM?
Thank you.
My project is to port a DC motor controller which I have completed using a Picaxe chip.
The Picaxe solution has the following characterics:
Bi-directional control
Each motor is controller independently for speed using different PWM frequencies
EMF feedback used to ensure motor is at correct speed and to adjustment to ensure each wheel is at the same speed
During my porting I have hit an issue the PWM functionality. I need two PWM signals that background PWM operations and are independent in terms of frequency.
See here for my Picaxe implementation.
How can I approach this functionality with GCB?