Thread: [Gambas-user] ERROR Segmentation fault (core dumped)
Brought to you by:
gambas
Menu
▾
▴
gambas-user
|
From: herberth g. <her...@gm...> - 2015-05-29 17:41:14
|
Install gambas3 svn update Gambas 7104 I get the following error. Segmentation fault (core dumped) Previously discharged He installed and all good I do not have Gambas3. that I can do. I never happened to me. Regards, Herberth |
|
From: Jørn E. M. <ep...@jo...> - 2015-05-29 17:44:58
|
Yupp, same here! KDE5 and Arch Linux. Happened with yestreday's commit. Den 29. mai 2015 19:41, skrev herberth guzman: > Install gambas3 > svn update Gambas 7104 > > I get the following error. > > Segmentation fault (core dumped) > > Previously discharged > He installed and all good > > I do not have Gambas3. > > that I can do. > I never happened to me. > > > Regards, > Herberth > ------------------------------------------------------------------------------ > _______________________________________________ > Gambas-user mailing list > Gam...@li... > https://lists.sourceforge.net/lists/listinfo/gambas-user |
|
From: Charlie R. <Kar...@Fe...> - 2015-05-29 17:56:13
Attachments:
valgrind.out
|
Am Freitag, den 29.05.2015, 19:44 +0200 schrieb Jørn Erik Mørne: > Yupp, same here! > > KDE5 and Arch Linux. Happened with yestreday's commit. > > Den 29. mai 2015 19:41, skrev herberth guzman: > > Install gambas3 > > svn update Gambas 7104 > > > > I get the following error. > > > > Segmentation fault (core dumped) > > > > Previously discharged > > He installed and all good > > > > I do not have Gambas3. > > > > that I can do. > > I never happened to me. > > > > > > Regards, > > Herberth Salut, here also Lubuntu 14.04.2 LTS gambas3 rev 7103 when starting gambas IDE, here the valgrin log -- Amicalement Charlie |
|
From: Benoît M. <ga...@us...> - 2015-05-29 18:15:39
|
Le 29/05/2015 19:55, Charlie Reinl a écrit : > > Salut, > > here also Lubuntu 14.04.2 LTS > gambas3 rev 7103 > when starting gambas IDE, here the valgrin log > > Do you have gb.qt5 installed or not? -- Benoît Minisini |
|
From: Charlie R. <Kar...@Fe...> - 2015-05-29 18:50:17
Attachments:
gambas3-rev7103.tar.gz
|
Am Freitag, den 29.05.2015, 20:15 +0200 schrieb Benoît Minisini: > Le 29/05/2015 19:55, Charlie Reinl a écrit : > > > > Salut, > > > > here also Lubuntu 14.04.2 LTS > > gambas3 rev 7103 > > when starting gambas IDE, here the valgrin log > > > > > > Do you have gb.qt5 installed or not? > Salut Benoît, how can I check this, in Synaptic by searching 'qt5', shows a lot of files with qt5 are installed. I send you the compile logs. |
|
From: Benoît M. <ga...@us...> - 2015-05-29 19:08:01
|
Le 29/05/2015 20:50, Charlie Reinl a écrit : > Am Freitag, den 29.05.2015, 20:15 +0200 schrieb Benoît Minisini: >> Le 29/05/2015 19:55, Charlie Reinl a écrit : >>> >>> Salut, >>> >>> here also Lubuntu 14.04.2 LTS >>> gambas3 rev 7103 >>> when starting gambas IDE, here the valgrin log >>> >>> >> >> Do you have gb.qt5 installed or not? >> > > Salut Benoît, > > how can I check this, in Synaptic by searching 'qt5', shows a lot of > files with qt5 are installed. > I send you the compile logs. > I'm talking about 'gb.qt5'! The answer is in the 'configure.log' file: || || THESE COMPONENTS ARE DISABLED: || - gb.db.postgresql || - gb.gtk3 || - gb.jit || - gb.qt5 || - gb.qt5.opengl || - gb.qt5.webkit || - gb.sdl2 || - gb.sdl2.audio || So you don't have gb.qt5 installed. -- Benoît Minisini |
|
From: Charlie R. <Kar...@Fe...> - 2015-05-29 19:44:28
|
Am Freitag, den 29.05.2015, 21:07 +0200 schrieb Benoît Minisini: > Le 29/05/2015 20:50, Charlie Reinl a écrit : > > Am Freitag, den 29.05.2015, 20:15 +0200 schrieb Benoît Minisini: > >> Le 29/05/2015 19:55, Charlie Reinl a écrit : > >>> > >>> Salut, > >>> > >>> here also Lubuntu 14.04.2 LTS > >>> gambas3 rev 7103 > >>> when starting gambas IDE, here the valgrin log > >>> > >>> > >> > >> Do you have gb.qt5 installed or not? > >> > > > > Salut Benoît, > > > > how can I check this, in Synaptic by searching 'qt5', shows a lot of > > files with qt5 are installed. > > I send you the compile logs. > > > > I'm talking about 'gb.qt5'! The answer is in the 'configure.log' file: > > || > || THESE COMPONENTS ARE DISABLED: > || - gb.db.postgresql > || - gb.gtk3 > || - gb.jit > || - gb.qt5 > || - gb.qt5.opengl > || - gb.qt5.webkit > || - gb.sdl2 > || - gb.sdl2.audio > || > > So you don't have gb.qt5 installed. > oh, yeah, mostly using his ability to read, saves a lot of time. Sorry -- Amicalement Charlie |
|
From: Jørn E. M. <ep...@jo...> - 2015-05-29 19:45:48
|
Den 29. mai 2015 21:44, skrev Charlie Reinl: > Am Freitag, den 29.05.2015, 21:07 +0200 schrieb Benoît Minisini: >> Le 29/05/2015 20:50, Charlie Reinl a écrit : >>> Am Freitag, den 29.05.2015, 20:15 +0200 schrieb Benoît Minisini: >>>> Le 29/05/2015 19:55, Charlie Reinl a écrit : >>>>> Salut, >>>>> >>>>> here also Lubuntu 14.04.2 LTS >>>>> gambas3 rev 7103 >>>>> when starting gambas IDE, here the valgrin log >>>>> >>>>> >>>> Do you have gb.qt5 installed or not? >>>> >>> Salut Benoît, >>> >>> how can I check this, in Synaptic by searching 'qt5', shows a lot of >>> files with qt5 are installed. >>> I send you the compile logs. >>> >> I'm talking about 'gb.qt5'! The answer is in the 'configure.log' file: >> >> || >> || THESE COMPONENTS ARE DISABLED: >> || - gb.db.postgresql >> || - gb.gtk3 >> || - gb.jit >> || - gb.qt5 >> || - gb.qt5.opengl >> || - gb.qt5.webkit >> || - gb.sdl2 >> || - gb.sdl2.audio >> || >> >> So you don't have gb.qt5 installed. >> > oh, yeah, mostly using his ability to read, saves a lot of time. > > Sorry > I have it installed though |
|
From: Benoît M. <ga...@us...> - 2015-05-29 22:34:38
|
Le 29/05/2015 21:45, Jørn Erik Mørne a écrit : >> > I have it installed though > So I have compiled and installed the latest trunk on a Mint 17.1 64 bits and on a ArchLinux 32 bits: everything works as expected, no crash at all... Strange! -- Benoît Minisini |
|
From: Jørn E. M. <ep...@jo...> - 2015-05-30 10:48:43
|
Hmm.... only difference is I have 64-bit. Any recently added dependencies? Den 30. mai 2015 00:34, skrev Benoît Minisini: > Le 29/05/2015 21:45, Jørn Erik Mørne a écrit : >> I have it installed though >> > So I have compiled and installed the latest trunk on a Mint 17.1 64 bits > and on a ArchLinux 32 bits: everything works as expected, no crash at > all... Strange! > |
|
From: Jørn E. M. <ep...@jo...> - 2015-06-02 18:52:29
|
The problem persists with me since about 7104 as reported by Herberth. Tried on two Arch systems. |
|
From: Benoît M. <ga...@us...> - 2015-06-02 19:07:08
|
Le 02/06/2015 20:52, Jørn Erik Mørne a écrit : > The problem persists with me since about 7104 as reported by Herberth. > Tried on two Arch systems. > Can you recompile and reinstall from scratch? I.e. by removing any Gambas files installed from a previous compilation. Then can you send me the output of the entire configuration, compilation and installation process? Or can you provide ma a ssh access to one of your computer? -- Benoît Minisini |
|
From: Charlie R. <Kar...@Fe...> - 2015-06-02 21:18:35
Attachments:
gambas3-7108-#11.tar.gz
|
Am Dienstag, den 02.06.2015, 21:07 +0200 schrieb Benoît Minisini: > Le 02/06/2015 20:52, Jørn Erik Mørne a écrit : > > The problem persists with me since about 7104 as reported by Herberth. > > Tried on two Arch systems. > > > > Can you recompile and reinstall from scratch? I.e. by removing any > Gambas files installed from a previous compilation. > > Then can you send me the output of the entire configuration, compilation > and installation process? > > Or can you provide ma a ssh access to one of your computer? > Salut Benoît, here attached the logs and a valgrind.log. I made a 'make uninstall', and removed /usr/lib/gambas3 and /usr/shared/gambas3, before rebuilt from scratch (trunk was also removed). LUbuntu 14.04.2 LTS x86 -- Amicalement Charlie |
|
From: Benoît M. <ga...@us...> - 2015-06-03 01:08:54
|
Le 02/06/2015 23:18, Charlie Reinl a écrit : > Am Dienstag, den 02.06.2015, 21:07 +0200 schrieb Benoît Minisini: >> Le 02/06/2015 20:52, Jørn Erik Mørne a écrit : >>> The problem persists with me since about 7104 as reported by Herberth. >>> Tried on two Arch systems. >>> >> >> Can you recompile and reinstall from scratch? I.e. by removing any >> Gambas files installed from a previous compilation. >> >> Then can you send me the output of the entire configuration, compilation >> and installation process? >> >> Or can you provide ma a ssh access to one of your computer? >> > > Salut Benoît, > > here attached the logs and a valgrind.log. > > I made a 'make uninstall', and removed /usr/lib/gambas3 > and /usr/shared/gambas3, before rebuilt from scratch (trunk was also > removed). > > LUbuntu 14.04.2 LTS x86 > I need a ssh access to one of your machines, to know what the interpreter was doing exaclty when it crashed... -- Benoît Minisini |
|
From: Benoît M. <ga...@us...> - 2015-06-03 01:10:18
|
Le 03/06/2015 03:08, Benoît Minisini a écrit : > Le 02/06/2015 23:18, Charlie Reinl a écrit : >> Am Dienstag, den 02.06.2015, 21:07 +0200 schrieb Benoît Minisini: >>> Le 02/06/2015 20:52, Jørn Erik Mørne a écrit : >>>> The problem persists with me since about 7104 as reported by Herberth. >>>> Tried on two Arch systems. >>>> >>> >>> Can you recompile and reinstall from scratch? I.e. by removing any >>> Gambas files installed from a previous compilation. >>> >>> Then can you send me the output of the entire configuration, compilation >>> and installation process? >>> >>> Or can you provide ma a ssh access to one of your computer? >>> >> >> Salut Benoît, >> >> here attached the logs and a valgrind.log. >> >> I made a 'make uninstall', and removed /usr/lib/gambas3 >> and /usr/shared/gambas3, before rebuilt from scratch (trunk was also >> removed). >> >> LUbuntu 14.04.2 LTS x86 >> > > I need a ssh access to one of your machines, to know what the > interpreter was doing exaclty when it crashed... > Or you can even share a desktop with the krfb KDE program. I just need a terminal and gdb to debug the program. -- Benoît Minisini |
|
From: Benoît M. <ga...@us...> - 2015-06-03 12:23:55
|
Le 02/06/2015 20:52, Jørn Erik Mørne a écrit : > The problem persists with me since about 7104 as reported by Herberth. > Tried on two Arch systems. > Please use the latest revision. Regards, -- Benoît Minisini |
|
From: Jørn E. M. <ep...@jo...> - 2015-06-03 12:56:18
|
Den 03. juni 2015 14:23, skrev Benoît Minisini: > Le 02/06/2015 20:52, Jørn Erik Mørne a écrit : >> The problem persists with me since about 7104 as reported by Herberth. >> Tried on two Arch systems. >> > Please use the latest revision. > > Regards, > Success :) |
|
From: Charlie R. <Kar...@Fe...> - 2015-06-03 16:04:57
|
Am Mittwoch, den 03.06.2015, 14:23 +0200 schrieb Benoît Minisini: > Le 02/06/2015 20:52, Jørn Erik Mørne a écrit : > > The problem persists with me since about 7104 as reported by Herberth. > > Tried on two Arch systems. > > > > Please use the latest revision. > > Regards, > Salut, yes since rev. 7109 the IDE can be started on older systems (without qt5core >= 5.3) Thanks again -- Amicalement Charlie |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X