Re: [Fx2lib-devel] View program size

[ANDRONIC B. <and...@gm...>]

I can't see where are the code, xram sizes in my .mem file.
Could you show me?

################################################
firmware.mem
################################################
Internal RAM layout:
      0 1 2 3 4 5 6 7 8 9 A B C D E F
0x00:|0|0|0|0|0|0|0|0|a|a|a|a|a|a|a|Q|
0x10:|Q|Q| | | | | | | | | | | | | | |
0x20:|B|T|S|S|S|S|S|S|S|S|S|S|S|S|S|S|
0x30:|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|
0x40:|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|
0x50:|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|
0x60:|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|
0x70:|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|
0x80:|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|
0x90:|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|
0xa0:|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|
0xb0:|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|
0xc0:|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|
0xd0:|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|
0xe0:|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|
0xf0:|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|S|
0-3:Reg Banks, T:Bit regs, a-z:Data, B:Bits, Q:Overlay, I:iData, S:Stack,
A:Absolute

Stack starts at: 0x22 (sp set to 0x21) with 222 bytes available.

Other memory:
   Name             Start    End      Size     Max
   ---------------- -------- -------- -------- --------
   PAGED EXT. RAM                         0      256
   EXTERNAL RAM                           0      512
   ROM/EPROM/FLASH  0x0000   0x3fb7    2637    15360
#############################################################

The last line ( EXTERNAL RAM)  means that I don't use a Xram?


On Sun, Apr 15, 2012 at 9:06 AM, Maarten Brock <sou...@ds...>wrote:

> Hi,
>
> Just open the .mem file.
>
> Maarten
>
> > Hi everyone,
> >
> > How can I see the program size (xram, code, data) on SDCC after
> compiling?
> >
> > with Keil, we could see:
> > Program Size: data=90.0 xdata=4492 code=5455
> >
> > Build target 'RAM'
> > assembling dscr.a51...
> > compiling fw.c...
> > Source\fw.c(34): warning C317: attempt to redefine macro '_IFREQ'
> > compiling device.c...
> > linking...
> > Program Size: data=90.0 xdata=4492 code=5455
> > [...]
> >
> >
> > --
> > Mr. Andronic BOANARIJESY
> >      Software Engineer
> >
>
>
>
>
> ------------------------------------------------------------------------------
> For Developers, A Lot Can Happen In A Second.
> Boundary is the first to Know...and Tell You.
> Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
> http://p.sf.net/sfu/Boundary-d2dvs2
> _______________________________________________
> Fx2lib-devel mailing list
> Fx2...@li...
> https://lists.sourceforge.net/lists/listinfo/fx2lib-devel
>



-- 
Mr. Andronic BOANARIJESY
     Software Engineer
     Tel :  +212 6 38 88 28 37
     Morocco