Re: [Fx2lib-devel] fx2lib & stdbool.h

[Xiaofan C. <xia...@gm...>]

On Tue, Mar 15, 2011 at 4:23 AM, Dennis Muhlestein
<djm...@gm...> wrote:
> Looks like it does need attention.
>
> Your 2nd question about pulling the changes in I think brings a good
> time to ask this.. I'm not working at the same place I was when I
> developed fx2lib and so changes are quite difficult for me to verify
> that they are good, pull, release etc.  I was going to grab a board when
> I left but I seem to have forgotten to do that so I'm not even currently
> set up to deploy firmware and make sure things work.
>
> So... as it appears there is still interest in this project, is there
> someone using it enough that they would like to take over pulling in
> changes?  A few of you already have github accounts so I could simply
> grant commit access to the repo for those accounts.

Travis Robinson and I (admins of the libusb-win32 project) are also
looking at FX2lib for developing testing firmware using the EZ-USB
FX2/FX2LP. Currently we use USB PICs but they are full-speed only
and we have no good means to test High Speed Isochronous Transfer
now. So we are looking at high speed USB MCUs like the FX2/FX2LP.
The Cystream firmware (and your sdcc/fx2lib port) may well be the
good starting point.

Actually the original developer of libusb-win32 (Stephan Meyer)
was also using EZ-USB FX2 chips for test firmware.

The benchmark firmware developed by Travis can be used
to test libusb-win32, libusbdotnet and libusb-1.0 Windows backend.

Reference:
http://code.google.com/p/usb-travis/
http://sourceforge.net/projects/libusb-win32/
http://sourceforge.net/projects/libusbdotnet/
http://www.libusb.org/wiki/windows_backend

-- 
Xiaofan