[Fx2lib-devel] Using FXLOAD with udev on SUSE

[Eric W. <er...@wi...>]

Hi,

I'm trying to write a udev rule but I get the following error when I 
test it:
linux-b1xe:~ # udevadm test /sys/bus/usb/2-1

parse_file: reading '/etc/udev/rules.d/10-evw.rules' as rules file
add_to_rules: invalid rule '/etc/udev/rules.d/10-evw.rules:4'

The fist three lines of 10-evw.rules are comments, the fourth line is my 
rule and is (in one line):

RUN+="/sbin/fxload/ -t fx2 -D /proc/bus/usb/002/033 -I 
/usr/share/RCU_02.hex"
DRIVER==”usb”, RUN+="/sbin/fxload/ -t fx2 -D /proc/bus/usb/002/033 -I 
/usr/share/RCU_02.hex"

Querying the device to get my attributes gives me:

linux-b1xe:~ # udevinfo -a -p /sys/bus/usb/devices/2-1

Udevinfo starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

looking at device '/devices/pci0000:00/0000:00:11.0/0000:02:02.0/usb2/2-1':
KERNEL=="2-1"
SUBSYSTEM=="usb"
DRIVER=="usb"
ATTR{dev}=="189:129"
ATTR{configuration}==""
ATTR{bNumInterfaces}==" 1"
ATTR{bConfigurationValue}=="1"
ATTR{bmAttributes}=="80"
ATTR{bMaxPower}=="100mA"
ATTR{urbnum}=="6"
ATTR{idVendor}=="04b4"
ATTR{idProduct}=="0082"
ATTR{bcdDevice}=="0000"
ATTR{bDeviceClass}=="ff"
ATTR{bDeviceSubClass}=="ff"
ATTR{bDeviceProtocol}=="ff"
ATTR{bNumConfigurations}=="1"
ATTR{bMaxPacketSize0}=="64"
ATTR{speed}=="480"
ATTR{busnum}=="2"
ATTR{devnum}=="2"
ATTR{version}==" 2.00"
ATTR{maxchild}=="0"
ATTR{quirks}=="0x0"
ATTR{authorized}=="1"

looking at parent device 
'/devices/pci0000:00/0000:00:11.0/0000:02:02.0/usb2':
KERNELS=="usb2"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{dev}=="189:128"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}==" 0mA"
ATTRS{urbnum}=="49"
ATTRS{idVendor}=="1d6b"
ATTRS{idProduct}=="0002"
ATTRS{bcdDevice}=="0206"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="01"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="480"
ATTRS{busnum}=="2"
ATTRS{devnum}=="1"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="6"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="Linux 2.6.25.18-0.2-pae ehci_hcd"
ATTRS{product}=="EHCI Host Controller"
ATTRS{serial}=="0000:02:02.0"
ATTRS{authorized_default}=="1"

looking at parent device '/devices/pci0000:00/0000:00:11.0/0000:02:02.0':
KERNELS=="0000:02:02.0"
SUBSYSTEMS=="pci"
DRIVERS=="ehci_hcd"
ATTRS{vendor}=="0x15ad"
ATTRS{device}=="0x0770"
ATTRS{subsystem_vendor}=="0x15ad"
ATTRS{subsystem_device}=="0x0770"
ATTRS{class}=="0x0c0320"
ATTRS{irq}=="16"
ATTRS{local_cpus}=="ffffffff,ffffffff,ffffffff,ffffffff"
ATTRS{modalias}=="pci:v000015ADd00000770sv000015ADsd00000770bc0Csc03i20"
ATTRS{enable}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""

looking at parent device '/devices/pci0000:00/0000:00:11.0':
KERNELS=="0000:00:11.0"
SUBSYSTEMS=="pci"
DRIVERS==""
ATTRS{vendor}=="0x15ad"
ATTRS{device}=="0x0790"
ATTRS{subsystem_vendor}=="0x0000"
ATTRS{subsystem_device}=="0x0000"
ATTRS{class}=="0x060401"
ATTRS{irq}=="0"
ATTRS{local_cpus}=="ffffffff,ffffffff,ffffffff,ffffffff"
ATTRS{modalias}=="pci:v000015ADd00000790sv00000000sd00000000bc06sc04i01"
ATTRS{enable}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}=="1"

looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""


Can anyone see what I'm doing wrong in my rule or missing that I may 
need to do elsewhere?

Thanks,

Eric Winsor