[Ftdi-usb-sio-devel] DLP-USB245M

[Per H. <per...@mv...>]

Hi folks,

I'm using a DLP-USB245M module which seems to be a nice little thing.
Under Windows I can use the VCP driver to read&write (still have a bit
problem with the direct driver to install properly)

Under Linux I can write to the device but the reads doesn't make it.
Anyone got an idea of what I'm doing wrong here?

Best regards,
Per

Bus 001 Device 012: ID 0403:6001 Future Technology Devices
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass            0 Interface
   bDeviceSubClass         0
   bDeviceProtocol         0
   bMaxPacketSize0         8
   idVendor           0x0403 Future Technology Devices
   idProduct          0x6001
   bcdDevice            4.00
   iManufacturer           1 DLP Design
   iProduct                2 DLP-USB245M
   iSerial                 3 DPAOHY76
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           32
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0xa0
       Remote Wakeup
     MaxPower               44mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           2
       bInterfaceClass       255 Vendor Specific Class
       bInterfaceSubClass    255 Vendor Specific Subclass
       bInterfaceProtocol    255 Vendor Specific Protocol
       iInterface              2 DLP-USB245M
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            2
           Transfer Type            Bulk
           Synch Type               none
         wMaxPacketSize         64
         bInterval               0
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x02  EP 2 OUT
         bmAttributes            2
           Transfer Type            Bulk
           Synch Type               none
         wMaxPacketSize         64
         bInterval               0
   Language IDs: (length=4)
      0409 English(US)
[root@perh root]#