The other questions is
What is using 100% CPU?
top should give you a hint.
If it's your program you'll know where to look.
On Wed, Mar 11, 2009 at 6:13 AM, Toan Pham <tph...@gm...> wrote:
> you shouldn't get that high CPU utilization. Would you please compile
> the kernel with usb debug, and ftdi_sio loaded with debug=1.
> I also use the same chip on linux 2.6.21 and tried on the lastest
> Ubuntu and had no problem. Although, i didn't run it at 230400, and
> flow control enabled. If possible, would you please try to run it at
> lower baudrate and/or without software flow control?
> . thank you.
>
> Toan
>
>
> On Tue, Mar 10, 2009 at 11:41 AM, iMac 266 <im...@gm...> wrote:
> > Hi,
> >
> > I am using a FT232RL USB to Serial adapter. Baudrate = 230400, one stop
> and
> > start bit, software flow control enabled.
> >
> > I am using this on the 2.6.27 kernel.
> >
> > I am wondering why my cpu is at 100% when I am transmitting data
> > continuously. When I use the same adapter and python code on a windows
> > machine I get 3% cpu usage. Is this a known issue?
> >
> > Thanks,
> >
> > Tim
> >
> >
> ------------------------------------------------------------------------------
> >
> > _______________________________________________
> > Ftdi-usb-sio-devel mailing list
> > Ftd...@li...
> > https://lists.sourceforge.net/lists/listinfo/ftdi-usb-sio-devel
> >
> >
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Ftdi-usb-sio-devel mailing list
> Ftd...@li...
> https://lists.sourceforge.net/lists/listinfo/ftdi-usb-sio-devel
>
|
