From: <fre...@km...> - 2004-05-20 19:23:42
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by 62.109.113.182: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware The comment on the change is: corrected attachment: Vol+ -> VOL+ ------------------------------------------------------------------------------ @@ -61,7 +61,7 @@ * Setting up the module(s) for autoloading on boot The MythTV site offers an excellent page that describes how to [http://www.mythtv.org/docs/mythtv-HOWTO-22.html#ss22.1 install a PVR-250/350 on Mandrake 9.1]. It may be helpful for other distros as well. -After setting up the IVTV driver, you might want to set up LIRC, too. My lirc came with a suitable lircd.conf.hauppauge config file which actually contains two separate descriptions of remote controls. The second one matches my remote (that came with the PVR 350), and I offer my matching `/etc/freevo/lircrc` [attachment:_etc_freevo_lircrc as an attachment here]. +After setting up the IVTV driver, you might want to set up LIRC, too. My lirc came with a suitable lircd.conf.hauppauge config file which actually contains two separate descriptions of remote controls. The second one matches my remote (that came with the PVR 350), and I offer my matching `/etc/freevo/lircrc` [attachment:_etc_freevo_lircrc_corrected as an attachment here]. In order to record using the PVR-250/350 cards with Freevo please read the IVTV section in RecordingInfo, too. |