From: Bastian F. <b_f...@we...> - 2006-06-25 10:13:09
|
look below for necesseray changes to your config file. On Sun, 2006-06-25 at 09:18 +0100, Philip MacIver wrote: > Hi all, > > I have been trying to get freevo working on my system for a long time > now with no success. > > I would like to know it it is necessary to use mplayer when watching TV > because I can't find anywhere in the config file to change this to use xine. > > Also I will include my current config file here because the changes that > I make here don't seem to be working. I have a dvb-t usb device and I > would like to use it to watch TV, it already works through xine's dvb > plug in and I can even use it to watch tv on mplayer if I use the mrl > dvb://'channel name' but the way freevo tries to launch it produces a > second where the screen is blank and then a return to the TV guide. > > Also the channels that I enter in the config file don't show up in the > guide, even though the notes say that they would even if they are not in > the xmltv file. > > > Well I hope someone can help me, thanks in advance > > #if 0 > # ----------------------------------------------------------------------- > # freevo_config.py - System configuration > # ----------------------------------------------------------------------- > # $Id: local_conf.py.example 6944 2005-01-09 10:45:55Z dischi $ > # > # Notes: > # This file contains the freevo settings. To change the settings > # you can edit this file, or better, put a file named local_conf.py > # # in the same directory and add your changes there. E.g.: when > # you # want a alsa as mplayer audio out, just put > # "MPLAYER_AO_DEV = # 'alsa9'" in local_conf.py > # > # This is no normal config file, it's Python code. Because of that, you > # need to follow some rules to avoid crashes. The examples should explain > # the settings, but make sure a line starting with a variable has > # NO SPACES OR TABS at the beginning. > # > # > # ----------------------------------------------------------------------- > # Freevo - A Home Theater PC framework > # Copyright (C) 2002 Krister Lagerstrom, et al. > # Please see the file freevo/Docs/CREDITS for a complete list of authors. > # > # This program is free software; you can redistribute it and/or modify > # it under the terms of the GNU General Public License as published by > # the Free Software Foundation; either version 2 of the License, or > # (at your option) any later version. > # > # This program is distributed in the hope that it will be useful, but > # WITHOUT ANY WARRANTY; without even the implied warranty of MER- > # CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General > # Public License for more details. > # > # You should have received a copy of the GNU General Public License along > # with this program; if not, write to the Free Software Foundation, Inc., > # 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA > # > # ----------------------------------------------------------------------- > #endif > > > > > CONFIG_VERSION = 5.15 add this line and send us your logfiles if something does not work DEBUG = 1 > > # ====================================================================== > # General freevo settings: > # ====================================================================== > > # AUDIO_DEVICE = '/dev/dsp' # e.g.: /dev/dsp0, /dev/audio, > /dev/alsa/? > # AUDIO_INPUT_DEVICE = '/dev/dsp1' # e.g.: /dev/dsp0, /dev/audio, > /dev/alsa/? > # MAJOR_AUDIO_CTRL = 'VOL' # Freevo takes control over one > audio ctrl > # 'VOL', 'PCM' 'OGAIN' etc. > # CONTROL_ALL_AUDIO = 1 # Should Freevo take complete > control of audio > # MAX_VOLUME = 90 # Set what you want maximum > volume level to be. > # DEFAULT_VOLUME = 40 # Set default volume level. > # TV_IN_VOLUME = 60 # Set this to your preferred > level 0-100. > # VCR_IN_VOLUME = 90 # If you use different input from TV > # DEV_MIXER = '/dev/mixer' # mixer device > > # START_FULLSCREEN_X = 0 # Start in fullscreen mode if > using x11 or xv. > > # CONFIRM_SHUTDOWN = 1 # ask before shutdown > > # > # Physical ROM drives, multiple ones can be specified > # by adding comma-seperated and quoted entries. > # > # Format [ ('mountdir1', 'devicename1', 'displayed name1'), > # ('mountdir2', 'devicename2', 'displayed name2'), ...] > # > # Set to None to autodetect drives in during startup from /etc/fstab, > # set to [] to disable rom drive support at all > # > # ROM_DRIVES = None > > # > # Hide discs from the wrong menu (e.g. VCDs in audio menu) and empty discs. > # > # HIDE_UNUSABLE_DISCS = 1 > > # > # Attempt to set the speed of the ROM drive. A good value for keeping the > # drive silent while playing movies is 8. > # > ROM_SPEED = 12 > > # > # Perform a whole system shutdown at SHUTDOWN! Useful for standalone boxes. > # > # ENABLE_SHUTDOWN_SYS = 0 > > # > # You can add more keybindings by adding them to the correct hash. > # e.g. If you want to send 'contrast -100' to mplayer by pressing the > '1' key, > # just add the following line: > # > # EVENTS['video']['1'] = Event(VIDEO_SEND_MPLAYER_CMD, arg='contrast -100') > # > # See src/event.py for a list of all possible events. > > # > # Use arrow keys for back and select (alternate way of navigating) > # > # MENU_ARROW_NAVIGATION = 0 > > # > # Keymap to map keyboard keys to event strings. You can also add new keys > # here, e.g. KEYMAP[key.K_x] = 'SUBTITLE'. The K_-names are defined by > pygame. > # > > # > # Use Internet resources to fetch information? > # For example, Freevo can use CDDB for album information, > # the IMDB movie database for movie info, and Amazon for cover searches. > # Set this to 0 if your computer isn't connected to a network. > # > # USE_NETWORK = 1 > > # > # Directory location to save files when the normal filesystem > # doesn't allow saving. This directory can save covers and fxd files > # for read only filesystems like ROM drives. Set this variable to your > # old MOVIE_DATA_DIR if you have one. It needs to be set to a directory > # Freevo can write to. > # > # OVERLAY_DIR = os.path.join(FREEVO_CACHEDIR, 'vfs') > > # > # Umask setting for all files. > # 022 means only the user has write access. If you share your Freevo > # installation with different users, set this to 002 > # > # UMASK = 022 > > # > # Suffix for playlist files > # > # PLAYLIST_SUFFIX = [ 'm3u' ] > > # > # Use md5 in mmpython to create unique disc ids. Enable this if you have > # problems with different discs having the same id. > # > # MMPYTHON_CREATE_MD5_ID = 0 > > # > # Keep metadata in memory > # Setting this variable will keep all cache files in memory. Startup will be > # slower, but for large directories, this will speed up the display. > # 0 = Only keep current dir in memory. Use this if you have too much data > # and not enough RAM > # 1 = Once loaded, keep cachefile for directory in memory > # 2 = Load all cachefiles on startup > # > # WARNING: you should not run 'freevo cache' when freevo is running. > # > # MEDIAINFO_USE_MEMORY = 1 > > # > # Cache images. This uses a lot of disc space but it's a huge speed > # enhancement. The images will be cached in OVERLAY_DIR > # > CACHE_IMAGES = 1 > > > # ====================================================================== > # Plugins: > # ====================================================================== > > # Remove undesired plugins by setting plugin.remove(code). > # You can also use the name to remove a plugin. But if you do that, > # all instances of this plugin will be removed. > # > # Examples: > # plugin.remove(plugin_tv) or > # plugin.remove('tv') will remove the tv module from the main menu > # plugin.remove(rom_plugins['image']) will remove the rom drives from the > # image main menu, > # plugin.remove('rom_drives.rom_items') will remove the rom drives from all > # menus > # > # See freevo_config.py for a list of loaded plugins > > # > # Use ivtv_record instead if you have an ivtv based card (PVR-250/350) > # and want freevo to do everthing for you. TV_SETTINGS must be set > # correctly. To use you need to set the following two lines: > # > # plugin.remove('tv.generic_record') > # plugin_record = plugin.activate('tv.ivtv_record') > Add these lines if you want to use xine to watch TV plugin.remove('tv.mplayer') plugin.activate('tv.xine') > # > # Enable this for joystick support: > # plugin.activate('joy') > # ====================================================================== > # Freevo directory settings: > # ====================================================================== > > # You can change all this variables in the folder.fxd on a per folder > # basis > # > # Example: > # <freevo> > # <folder title="Title of the directory" img-cover="nice-cover.png"> > # <setvar name="directory_autoplay_single_item" val="0"/> > # <info> > # <content>A small description of the directory</content> > # </info> > # </folder> > # </freevo> > > # > # Should directories sorted by date instead of filename? > # 0 = No, always sort by filename. > # 1 = Yes, sort by date > # 2 = No, don't sory by date for normal directories, > # but sort by date for TV_RECORD_DIR. > # > # DIRECTORY_SORT_BY_DATE = 2 > > # > # Should directory items be sorted in reverse order? > # > # DIRECTORY_REVERSE_SORT = 0 > > # > # Should we use "smart" sorting? > # Smart sorting ignores the word "The" in item names. > # > # DIRECTORY_SMART_SORT = 0 > > # > # Should Freevo autoplay an item if only one item is in the directory? > # > # DIRECTORY_AUTOPLAY_SINGLE_ITEM = 1 > > # > # Force the skin to use a specific layout number. -1 == no force. The layout > # toggle with DISPLAY will be disabled > # > # DIRECTORY_FORCE_SKIN_LAYOUT = -1 > > # > # Format string for the audio item names. > # > # Possible strings: > # a = artist, n = tracknumber, t = title, y = year, f = filename > # > # Example: > # This will show the title and the track number: > # DIRECTORY_AUDIO_FORMAT_STRING = '%(n)s - %(t)s' > # > # DIRECTORY_AUDIO_FORMAT_STRING = '%(t)s' > > # > # Use media id tags to generate the name of the item. This should be > # enabled all the time. It should only be disabled for directories with > # broken tags. > # > # DIRECTORY_USE_MEDIAID_TAG_NAMES = 1 > > # > # The following settings determine which features are available for > # which media types. > # > # If you set this variable in a folder.fxd, the value is 1 (enabled) > # or 0 (disabled). > # > # Examples: > # To enable autoplay for audio and image files: > # DIRECTORY_AUTOPLAY_ITEMS = [ 'audio', 'image' ] > # To disable autoplay entirely: > # DIRECTORY_AUTOPLAY_ITEMS = [] > > # Make all items a playlist. So when one is finished, the next one will > # start. It's also possible to browse through the list with UP and DOWN > # > # DIRECTORY_CREATE_PLAYLIST = [ 'audio', 'image' ] > > # Add playlist files ('m3u') to the directory > # > # DIRECTORY_ADD_PLAYLIST_FILES = [ 'audio', 'image' ] > > # Add the item 'Random Playlist' to the directory > # > # DIRECTORY_ADD_RANDOM_PLAYLIST = [ 'audio' ] > > # Make 'Play' not 'Browse' the default action when only items and not > # subdirectories are in the directory > # > # DIRECTORY_AUTOPLAY_ITEMS = [ ] > > > # ====================================================================== > # Freevo movie settings: > # ====================================================================== > > # > # Where the movie files can be found. > # This is a list of items (e.g. directories, fxd files). The items > themselves > # can also be a list of (title, file) > # > # VIDEO_ITEMS = [ ('action movies', '/files/movies/action'), > # ('funny stuff', '/files/movies/comedy') ] > # > # Some people access movies on a different machine using an automounter. > # To avoid timeouts, you can specify the machine name in the directory > # to check if the machine is alive first > # Directory myserver:/files/server-stuff will show the item for the > # directory /files/server-stuff if the computer myserver is alive. > > # > # The list of filename suffixes that are used to match the files that > # are played wih MPlayer. > # > # VIDEO_MPLAYER_SUFFIX = [ 'avi', 'mpg', 'mpeg', 'wmv', 'bin', 'rm', > # 'divx', 'ogm', 'vob', 'asf', 'm2v', 'm2p', > # 'mp4', 'viv', 'nuv', 'mov', 'iso', > # 'nsv', 'mkv' ] > > # > # The list of filename suffixes that are used to match the files that > # are played wih Xine. > # > VIDEO_XINE_SUFFIX = [ 'avi', 'mpg', 'mpeg', 'rm', 'divx', 'ogm', > 'asf', 'm2v', 'm2p', 'mp4', 'mov', 'cue' ] > > # > # Preferred video player > # > VIDEO_PREFERED_PLAYER = 'xine' > > # > # Only scan OVERLAY_DIR and VIDEO_SHOW_DATA_DIR for fxd files containing > # information about a disc. If you only have the fxd files for discs in > # one of this directories (and subdirectories), set this to 1, it will > # speed up startup, 0 may be needed if you have fxd files with disc links > # in your normal movie tree. > # > # VIDEO_ONLY_SCAN_DATADIR = 1 > > > # ====================================================================== > # Freevo audio settings: > # ====================================================================== > > # > # Where the Audio (mp3, ogg) files can be found. > # This is a list of items (e.g. directories, fxd files). The items > themselves > # can also be a list of (title, file) > # > # To add webradio support, add fxd/webradio.fxd to this list > # > AUDIO_ITEMS = [ ('Music Collection', '/multi-media/Music/') ] > > # > # The list of filename suffixes that are used to match the files that > # are played as audio. > # > AUDIO_SUFFIX = [ 'mp3', 'ogg', 'wav','m4a', 'wma', 'aac', 'flac', > 'mka' ] > > # > # Regular expression used to recognize filenames which are likely to be > # covers for an album > # > # This will match front.jpg and cover-f.jpg, but not back.jpg nor > cover-b.jpg: > # AUDIO_COVER_REGEXP = 'front|-f' > > # > # Preferred audio player > # > AUDIO_PREFERED_PLAYER = 'xine' > > # > # Show video files in the audio menu (for music-videos) > # > # AUDIO_SHOW_VIDEOFILES = False > > # ====================================================================== > # Freevo image viewer settings: > # ====================================================================== > > # > # Where image files can be found. > # This is a list of items (e.g. directories, fxd files). The items itself > # can also be a list of (title, file) > # > # IMAGE_ITEMS = None > > # > # The list of filename suffixes that are used to match the files that > # are used for the image viewer. > # > # IMAGE_SUFFIX = [ 'jpg','gif','png', 'jpeg','bmp','tiff','psd' ] > > # > # The viewer now supports a new type of menu entry, a slideshow file. > # It also has the slideshow alarm signal handler for automated shows. > # It uses a new configuration option: > # > # IMAGE_SSHOW_SUFFIX = [ 'ssr' ] > > # > # Mode of the blending effect in the image viewer between two images > # Possible values are: > # > # None: no blending > # -1 random effect > # 0 alpha blending > # 1 wipe effect > # > IMAGEVIEWER_BLEND_MODE = -1 > > > > # ====================================================================== > # Freevo games settings: > # ====================================================================== > > # > # MAME is an emulator for old arcade video games. It supports almost > # 2000 different games! The actual emulator is not included in Freevo, > # you'll need to download and install it separately. The main MAME > # website is at http://www.mame.net, but the version that is used here > # is at http://x.mame.net since the regular MAME is for Windows. > # > # SNES stands for Super Nintendo Entertainment System. Freevo relies > # on other programs that are not included in Freevo to play these games. > # > # NEW GAMES SYSTEM : > # ================= > # The GAMES_ITEMS structure is now build as follows : > # <NAME>, <FOLDER>, (<TYPE>, <COMMAND_PATH>, <COMMAND_ARGS>, <IMAGE_PATH>, \ > # [<FILE_SUFFIX_FOR_GENERIC>]) > # where : > # - <TYPE> : Internal game types (MAME or SNES) or > # generic one (GENERIC) > # - <COMMAND_PATH> : Emulator command > # - <COMMAND_ARGS> : Arguments for the emulator > # - <IMAGE_PATH> : Optionnal path to the picture > # - <FILE_SUFFIX_FOR_GENERIC> : If the folder use the GENERIC > # type, then you must specify > here > # the file suffix used by the > emulator > # GAMES_ITEMS = [ ('MAME', '/home/media/games/xmame/roms', > # ('MAME', '/usr/local/bin/xmame.SDL', '-fullscreen > -modenumber 6', > # '/home/media/games/xmame/shots', None)), > # ('SUPER NINTENDO', '/home/media/games/snes/roms', > # ('SNES', '/usr/local/bin/zsnes', '-m -r 3 -k 100 -cs > -u', '', None )), > # ('Visual Boy Advance', '/home/media/games/vba/roms/', > # ('GENERIC', '/usr/local/vba/VisualBoyAdvance', ' ', '', > [ 'gba' ] )), > # ('MEGADRIVE', '/home/media/games/megadrive/roms', > # ('GENESIS', '/usr/local/bin/generator-svgalib', '', '', > '' )) ] > # > # GAMES_ITEMS = None > > # > # These settings are used for the MAME arcade emulator: > # > > # Priority of the game process > # 0 = Don't change the priority > # >0 - Lower priority > # <0 - Higher priority > # > # GAMES_NICE = -20 > > # > # MAME cache directory > # > # GAMES_MAME_CACHE = '%s/romlist-%s.pickled' % (FREEVO_CACHEDIR, > os.getuid()) > > # ====================================================================== > # Freevo SKIN settings: > # ====================================================================== > > # > # Select a way when to switch to text view even if a image menu is there > # > # 1 = Force text view when all items have the same image and there are no > # directories > # 2 = Ignore the directories, always switch to text view when all images > # are the same > # > # SKIN_FORCE_TEXTVIEW_STYLE = 1 > > # > # Force text view for the media menu > # (The media menu is the first menu displayed for video, audio, images > # and games). > # > # SKIN_MEDIAMENU_FORCE_TEXTVIEW = 0 > > > # ====================================================================== > # Freevo OSD settings: > # ====================================================================== > > # > # System Path to search for fonts not included in the Freevo distribution > # > # OSD_EXTRA_FONT_PATH = [ '/usr/X11R6/lib/X11/fonts/truetype/' ] > > # > # Font aliases > # All names must be lowercase! All alternate fonts must be in > './share/fonts/' > # > # OSD_FONT_ALIASES = { 'arial_bold.ttf' : 'VeraBd.ttf' } > > # > # Number of seconds to wait until the busy icon is shown in the menu. > # Busy icon can also be shown right away when there is more than a certain > # number of files in a directory. > # > # Set this to None to disable this. > # (seconds, files) > # > # OSD_BUSYICON_TIMER = (0.7, 200) > > # OSD_OVERSCAN_X = 0 > # OSD_OVERSCAN_Y = 0 > > # > # Execute a script on OSD startup. > # > # OSD_SDL_EXEC_AFTER_STARTUP = "" > > # > # Execute a script on OSD close. > # > # OSD_SDL_EXEC_AFTER_CLOSE = "" > > # > # Stop the osd before playing a movie with xine or mplayer. Some output > # devices need this. After playback, the osd will be restored > # > # OSD_STOP_WHEN_PLAYING = 0 > > # > # Dim text that doesn't fit instead of using ellipses. > # OSD_DIM_TEXT = 1 > > # ====================================================================== > # Freevo remote control settings: > # ====================================================================== > > # > # Location of the lircrc file > # > # For remote control support, Freevo needs a lircrc file, like this: > # > # begin > # prog = freevo > # button = select > # config = SELECT > # end > # > # Check contrib/lirc for examples and helpers/freevo2lirc.pl for a converter > # script. > # > # LIRCRC = '/etc/freevo/lircrc' > > # > # Joystick support > # 0 = Disable joystick support > # 1 = Use js0, > # 2 = Use js1, > # ... etc > # > # JOY_DEV = 0 > > # Freevo can support as many buttons as your controller has > # as long as there is a corresponding entry in JOY_CMDS. > # You will also need to plugin.activate('joy'). > # FYI: new kernels use /dev/input/jsX, but joy.py will fall back on /dev/jsX > # > # JOY_CMDS = { > # 'up' : 'UP', > # 'down' : 'DOWN', > # 'left' : 'LEFT', > # 'right' : 'RIGHT', > # 'button 1' : 'PLAY', > # 'button 2' : 'PAUSE', > # 'button 3' : 'STOP', > # 'button 4' : 'ENTER', > # } > > > # ====================================================================== > # TVtime settings: > # ====================================================================== > > # > # Location of the TV time program > # Default: Use the value in freevo.conf > # > # TVTIME_CMD = CONF.tvtime > > > # ====================================================================== > # MPlayer settings: > # ====================================================================== > > # MPLAYER_AO_DEV = 'oss:/dev/dsp' # e.g.: oss,sdl,alsa, see > mplayer docs > > # MPLAYER_VO_DEV_OPTS = '' # e.g.: ':some_var=vcal' > > # DVD_LANG_PREF = 'en,se,no' # Order of preferred languages > on DVD. > # DVD_SUBTITLE_PREF = '' # Order of preferred subtitles > on DVD. > > # Priority of mplayer process. 0 is unchanged, <0 is higher prio, >0 > lower prio. > # prio <0 has no effect unless run as root. > # MPLAYER_NICE = -20 > > # > # Mplayer options to use the software scaler. If your CPU is fast > enough, you > # might try a software scaler. You can disable it later for some larger > files > # with the mplayer option '-nosws'. If you have -framedrop or -hardframedrop > # as mplayer option, the software scaler will also not be used. > # A good value for this variable is: > # MPLAYER_SOFTWARE_SCALER = "-subfont-text-scale 5 -fs -sws 2 -vf > scale=%s:-3,"\ > # "expand=%s:%s " % ( CONF.width, CONF.width, > CONF.height ) > # older versions of mplayer may need > # MPLAYER_SOFTWARE_SCALER = '-xy %s -sws 2 -vop scale:-1:-1:-1:100' % > CONF.width > # > # MPLAYER_SOFTWARE_SCALER = '' > > # > # Mplayer arguments for different media formats. (eg DVDs, CDs, AVI > files, etc) > # Uses a default value if nothing else matches. > # > #MPLAYER_ARGS = { 'dvd' : '-cache 8192', > # 'vcd' : '-cache 4096', > # 'cd' : '-cache 1024 -cdda speed=2', > # 'tv' : '-nocache', > # 'ivtv' : '-cache 8192', > # 'avi' : '-cache 5000 -idx', > # 'rm' : '-cache 5000 -forceidx', > # 'rmvb' : '-cache 5000 -forceidx', > # 'webcam' : 'tv:// -tv > driver=v4l:width=352:height=288:outfmt=yuy2:device=/dev/dvb/adapter0/frontend0', > # 'default': '-cache 5000' > # } > # > # > # Number of seconds before seek value times out. This is used when > # seeking a specified number of minutes into a movie. If you make > # a mistake or change your mind, the seek value will timeout after > # this many seconds. > # > # MPLAYER_SEEK_TIMEOUT = 8 > > # > # Autocrop files when playing. This is useful for files in 4:3 with black > # bars on a 16:9 tv > # > # MPLAYER_AUTOCROP = 0 > > # > # Try to set correct 'delay' and 'mc' values for mplayer based on the delay > # from mmpython. > # > # This should correct av sync problems with mplayer for some files, but > # may also break things. (I don't know, that's why it's disabled by > default). > # WARNING: When seeking, the playback is out of sync for some seconds! > # > # MPLAYER_SET_AUDIO_DELAY = 0 > > # > # Mplayer video filter for interlaced or progressive videos. If you have > # a slow pc, do not use post processing > # MPLAYER_VF_INTERLACED = '' > # MPLAYER_VF_PROGRESSIVE = 'pp=fd' > # For pal and dvb-t recordings, the following looks good > # MPLAYER_VF_INTERLACED = 'pp=md/de,phase=U' > # > # MPLAYER_VF_INTERLACED = 'pp=de/fd' > # MPLAYER_VF_PROGRESSIVE = 'pp=de' > > # ====================================================================== > # Xine settings: > # ====================================================================== > > # You need xine-ui version greater 0.9.21 to use the all the features > # of the xine plugin > > XINE_VO_DEV = 'xv' > XINE_COMMAND = '%s --hide-gui -pq -g -B --geometry %sx%s+0+0 > --no-splash' % \ > (CONF.xine, CONF.width, CONF.height) > > XINE_ARGS_DEF = '--no-lirc --post=pp:quality=10,expand' > > XINE_AO_DEV = 'alsa' # alsa or oss > > > # ====================================================================== > # Freevo TV settings: > # ====================================================================== > > # > # This is where recorded video is written. > # > # XXX the path doesn't work from the www cgi scripts! > # TV_RECORD_DIR = None > > # > # Watching TV > # > # XXX You must change this to fit your local conditions! > # > # NORM: ntsc, pal, secam > # INPUT: television, composite1 > # CHANLIST: One of the following: > # > # us-bcast, us-cable, us-cable-hrc, japan-bcast, japan-cable, europe-west, > # europe-east, italy, newzealand, australia, ireland, france, china-bcast, > # southafrica, argentina, canada-cable, russia > # > #TV_SETTINGS = 'pal television europe-west /dev/dvb/adapter0/dvr0' > #TV_SETTINGS = '%s television %s /dev/dvb/adapter0/dvr0' % (CONF.tv, > CONF.chanlist) > # > # Video input device > # > # Usually /dev/video0, but might be /dev/video1 instead for multiple boards. > # > # FreeBSD uses the Brooktree TV-card driver, not V4L. > # > TV_DRIVER = 'v4l' > TV_DEVICE = '/dev/dvb/adapter0/frontend0' > TV_INPUT = 0 > > # > # Additional options to pass to mplayer in TV mode. > # > # eg. To turn off deinterlacing: > # TV_OPTS = '-vop pp=ci' > # > # TV_OPTS = '' > > TV_SETTINGS = '%s television %s /dev/dvb/adapter0/frontend0' % (CONF.tv, > CONF.chanlist) > > # > # Size (in MB) of the timeshift buffer. (ie: how long you can pause tv > for.) > # This is set to a low default because the default buffer location is > # under FREEVO_CACHEDIR and we don't want to blow /var or /tmp. > # TIMESHIFT_BUFFER_SIZE = 128 > > # TIMESHIFT_ENCODE_CMD = 'mp1e -m3 -c%s -p%s -r14,100' % \ > # (TV_SETTINGS.split()[3], AUDIO_INPUT_DEVICE) > > # TIMESHIFT_BUFFER = '%s/timeshift.mpeg' % FREEVO_CACHEDIR > > # TV_CHANNEL_PROG = './chchan %(channel)s %(norm)s %(freqtable)s' > > # TV_DATEFORMAT = '%e-%b' # Day-Month: 11-Jun > # TV_TIMEFORMAT = '%H:%M' # Hour-Minute 14:05 > # TV_DATETIMEFORMAT = '%A %b %d %I:%M %p' # Thursday September 24 8:54 am > > # This is the filename format for files recorded using Freevo. > # You can use any of the strftime variables in it, provided you > # put two '%%' at the beginning. > # > # Some examples: > # %%A - Full weekday name. > # %%H - Hour (24-hour clock) as a decimal number [00,23]. > # %%M - Minute as a decimal number [00,59]. > # %%m - Month as a decimal number [01,12]. > # %%d - Day of the month as a decimal number [01,31]. > # %%p - Locale's equivalent of either AM or PM. > # > # More can be found at: > http://www.python.org/doc/current/lib/module-time.html > > # TV_RECORDFILE_MASK = '%%m-%%d %%H:%%M %(progname)s - %(title)s' > > > # if using the persitant recordserver > # TV_RECORD_SCHEDULE = '%s/record_schedule.xml' % FREEVO_CACHEDIR > > # TV_RECORD_SERVER_IP = 'localhost' > # TV_RECORD_SERVER_PORT = 18001 > > # start every recording X minutes before scheduled, > # and stop X minutes after scheduled - default to zero minutes. > # This must be a value in seconds although at the moment only has > # the percision of one minute. > # TV_RECORD_PADDING = 0 * 60 > > # VCR_AUDIO = (':adevice=%s' % AUDIO_DEVICE + > # ':audiorate=32000' + # 44100 for better sound > # ':forceaudio:forcechan=1:' + # Forced mono for bug in my > driver > # 'buffersize=64') # 64MB capture buffer, change? > > # TV capture size for viewing and recording. Max 768x480 for NTSC, > # 768x576 for PAL. Set lower if you have a slow computer! > # > # For the 'tvtime' TV viewing application, only the horizontal size is used. > # Set the horizontal size to 400 or 480 if you have a slow (~500MHz) > computer, > # it still looks OK, and the picture will not be as jerky. > # The vertical size is always either fullscreen or 480/576 (NTSC/PAL) > # for tvtime. > # TV_VIEW_SIZE = (640, 480) > # TV_REC_SIZE = (320, 240) # Default for slower computers > > # Input formats for viewing and recording. The format affect viewing > # and recording performance. It is specific to your hardware, so read > # the MPlayer docs and experiment with mplayer to see which one fits > # your computer best. > # TV_VIEW_OUTFMT = 'yuy2' # Better quality, slower on pure FB/X11 > # TV_REC_OUTFMT = 'yuy2' > > # XXX Please see the mencoder docs for more info about the settings > # XXX below. Some stuff must be changed (adevice), others probably > # XXX should be ("Change"), or could be in some cases ("change?") > # VCR_CMD = (CONF.mencoder + ' ' + > # 'tv:// ' + # New mplayer requires this. > # '-tv driver=%s:input=%d' % (TV_DRIVER, TV_INPUT) + > # ':norm=%s' % CONF.tv + > # ':channel=%(channel)s' + # Filled in by Freevo > # ':chanlist=%s' % CONF.chanlist + > # ':width=%d:height=%d' % (TV_REC_SIZE[0], TV_REC_SIZE[1]) + > # ':outfmt=%s' % TV_REC_OUTFMT + > # ':device=%s' % TV_DEVICE + > # VCR_AUDIO + # set above > # ' -ovc lavc -lavcopts ' + # Mencoder lavcodec video codec > # 'vcodec=mpeg4' + # lavcodec mpeg-4 > # ':vbitrate=1200:' + # Change lower/higher, bitrate > # 'keyint=30 ' + # Keyframe every 10 secs, > change? > # '-oac mp3lame -lameopts ' + # Use Lame for MP3 > encoding, must be enabled in mencoder! > # 'br=128:cbr:mode=3 ' + # MP3 const. bitrate, 128 > kbit/s > # '-ffourcc divx ' + # Force 'divx' ident, > better compat. > # '-endpos %(seconds)s ' + # only mencoder uses this > so do it here. > # '-o %(filename)s') # Filled in by Freevo > If mplayer works with the dvb:// mrl you can use this command to record streams: VCR_CMD = CONF.mplayer + ' -dumpstream -dumpfile %(filename)s "dvb://%(channel)s"' TV_RECORDFILE_SUFFIX = '.mpg' > > # > # Settings for ivtv based cards such as the WinTV PVR-250/350. > # > # XXX TODO: Add descriptions and valid settings for each option. > # bitrate in bps > # stream type > # Options are: 0 (mpeg2_ps), 1 (mpeg2_ts), 2 (mpeg1), 3 (mpeg2_pes_av), > # 5 (mpeg2_pes_v), 7 (mpeg2_pes_a), 10 (dvd) > > # TV_IVTV_OPTIONS = { > # 'input' : 4, > # 'resolution' : '720x480', > # 'aspect' : 2, > # 'audio_bitmask' : 233, > # 'bframes' : 3, > # 'bitrate_mode' : 1, > # 'bitrate' : 4000000, > # 'bitrate_peak' : 4000000, > # 'dnr_mode' : 0, > # 'dnr_spatial' : 0, > # 'dnr_temporal' : 0, > # 'dnr_type' : 0, > # 'framerate' : 0, > # 'framespergop' : 15, > # 'gop_closure' : 1, > # 'pulldown' : 0, > # 'stream_type' : 10, > # } > > # > # FREQUENCY_TABLE - This is only used when Freevo changes the channel > natively. > # This is only the case if you are using V4L2 and any of the following > plugins: > # timeshift, ivtv_record, ivtv_basic_tv. > # For the standard frequancy tables see src/tv/freq.py. To add your own > just > # replace tuner_id in the following example with a valid tuner id (ie: > '5' or > # 'BBC1') and a frequency in KHz. You may have as many entries as you like, > # anything here will simply override a corresponding entry in your standard > # frequency table and you can also have entries here that are not present in > # there. > > # FREQUENCY_TABLE = { > # 'tuner_id' : 55250, > # } > > > # VIDEO_GROUPS is a new setting to handle multiple arbitrary groups of > devices > # for viewing or recording. It will be possible to have different Freevo > # channels use different Video Groups. > > # VIDEO_GROUPS = [ > # VideoGroup(vdev=TV_DEVICE, > # adev=AUDIO_DEVICE, > # input_type='tuner', > # tuner_norm=CONF.tv, > # tuner_chanlist=CONF.chanlist, > # desc='Default Video Group', > # recordable=True), > # ] > > > # > # TV Channels. This list contains a mapping from the displayed channel name > # to the actual channel name as used by the TV watching application. > # The display name must match the names from the XMLTV guide, > # and the TV channel name must be what the tuner expects (usually a number). > # > # The TV menu is supposed to be supported by the XMLTV application for > # up to date listings, but can be used without it to just display > # the available channels. > # > # This list also determines the order in which the channels are displayed! > # N.B.: You must delete the XMLTV cache file (e.g. > /var/cache/freevo/TV.xml.pickled) > # if you make changes here and restart! > # > # Format: [('xmltv channel id', 'freevo display name', 'tv channel > name'), ...] > # > # If this variable is set to None (default), Freevo will try to auto-detect > # the channel list based on the xmltv file. This doesn't work for all > # xmltv grabber, e.g. the German list doesn't contain station lists. In this > # case Freevo will output the possible list for you to add them manually. > # > # If auto-detection doesn't work or you want to edit the list, run > # freevo tv_grab -query. > # > # Setting this variable to [] will deactivate the tv guide. If you don't > have > # a tv card, you may also want to add plugin.remove('tv') to remove the > whole > # tv menu. > # > # All channels listed here will be displayed on the TV menu, even if they're > # not present in the XMLTV listing. > # > # > # Timedependent channels: > # > # The TV_CHANNELS-list can look like this: > # you should really change these according to your channel list (channels.conf in you .xine or .mplayer dir) if you don't have xmltv running yet, you only need to change the second and third column. the third is the channel name in your channels.conf and the second is the name freevo displays in the guide. > TV_CHANNELS = [('1', 'BBC 1', 'BBC ONE'), > ('22', 'SVT2', 'E3'), > ('26', 'TV3', 'E10'), > ('27', 'TV4', 'E6'), > ('10', 'Kanal 5', 'E7'), > ('60', 'Fox Kids', 'E8', ('1234567','0600','1659')), > ('16', 'TV6', 'E8', ('1234567','1700','2359'), > ('1234567','0000','0300')), > ('14', 'MTV Europe', 'E11') ] > > # As you can see the list takes optional tuples: > # ( 'DAYS', 'START','END') > # > # 1234567 in days means all days. > # 12345 would mean monday to friday. > # > # It will display "Fox Kids" from 06:00 to 16:59 and "TV6" from 17:00 to > 03:00. > # 03:00 to 06:00 it won't be displayed at all. > # > > # TV_CHANNELS = None > > # > # Program to grab xmltv listings. To get a grabber, you need to download > # xmltv. A possible value for users in the USA is tv_grab_na > # Use the tv_grab helper to grab the listings and cache them. Start > # 'freevo tv_grab --help' for more informations. > > XMLTV_GRABBER = 'tv_grab_uk_rt' > > # > # If you want to run tv_sort on your listings add the path to tv_sort here. > # tv_sort will make sure all your programs have proper stop times, otherwise > # programs might get cut off at midnight. > # > # XMLTV_SORT = '' > > # > # Number of days the grabber should get > # > XMLTV_DAYS = 3 > > > # ====================================================================== > # Freevo builtin WWW server settings: > # ====================================================================== > > # > # To activate the built in web server, uncomment the following line > # > # plugin.activate('www') > > # > # Web server port number. 80 is the standard port, but is often > # taken already by apache, and cannot be used unless the server > # runs as root. Port 8080 is the default, change to 80 if > # needed. > # > # WWW_PORT = 8080 > > # > # Username / Password combinations to login to the web interface. > # > # WWW_USERS = { "user1" : "changeme", > # "optional" : "changeme2" } > # > > # > # Divide the TV guide into intervals of this length (in minutes) > # > # WWW_GUIDE_INTERVAL = 30 > > # > # Precision for TV guide (in minutes) > # > # WWW_GUIDE_PRECISION = 5 # > > # > # Show this many blocks at once > # > # WWW_GUIDE_COLS = 6 > > # WWW_STYLESHEET = 'styles/main.css' > > # WWW_JAVASCRIPT = 'scripts/display_prog-head.js' > > > # ====================================================================== > # Internal stuff, you shouldn't change anything here unless you know > # what you are doing > # ====================================================================== > > # > # Config for xml support in the movie browser > # the regexp has to be with ([0-9]|[0-9][0-9]) so we can get the numbers > # > # VIDEO_SHOW_REGEXP = "s?([0-9]|[0-9][0-9])[xe]([0-9]|[0-9][0-9])[^0-9]" > > > # > # Remote control daemon. The server is in the Freevo main application, > # and the client is a standalone application in rc_client/ > # > # ENABLE_NETWORK_REMOTE = 0 > # REMOTE_CONTROL_HOST = '127.0.0.1' > # REMOTE_CONTROL_PORT = 16310 > > > # > # XMLTV File > # > # This is the XMLTV file that can be optionally used for TV listings > # > # XMLTV_FILE = '/tmp/TV.xml' > > # > # XML TV Logo Location > # > # Use the "makelogos.py" script to download all the > # Station logos into a directory. And then put the path > # to those logos here > # TV_LOGOS = OS_CACHEDIR + '/xmltv/logos' > > # LOCALE='latin-1' > > DEBUG=1 > CHILDAPP_DEBUG = 1 > > > > ___________________________________________________________ > The all-new Yahoo! Mail goes wherever you go - free your email address from your Internet provider. http://uk.docs.yahoo.com/nowyoucan.html > > > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > _______________________________________________ > Freevo-users mailing list > Fre...@li... > https://lists.sourceforge.net/lists/listinfo/freevo-users |