From: <fre...@km...> - 2004-01-20 20:01:13
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by JornH: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware The comment on the change is: Restored lost info from DocumentationPage as a new sub-page No older revisions of the page stored, diff not available. |
From: <fre...@km...> - 2004-01-20 20:05:58
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by JornH: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware ------------------------------------------------------------------------------ @@ -13,11 +13,9 @@ The Matrox G400 is used by some of the main developers, it works well in framebuffer mode. -/MatroxInfo +DocumentationPage/MatroxInfo === Radeon === - -''Add info'' See the Radeon7000Page for information about that board. |
From: <fre...@km...> - 2004-02-07 21:19:47
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by 24.7.41.202: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware ------------------------------------------------------------------------------ @@ -65,6 +65,8 @@ [[BR]]{{{plugin.remove('tv.mplayer')}}} [[BR]]{{{plugin.activate('tv.ivtv_basic_tv')}}} +The MythTV site offers an excellent page that describes how to [http://www.mythtv.org/docs/mythtv-HOWTO-22.html#ss22.1 install a PVR-250/350 on Mandrake 9.1]. It may be helpful for other distros as well. + === ATI All-in-Wonder Models === Check out [http://gatos.sourceforge.net the Gatos website] for information on the All-in-Wonder cards. They have incredible support for even the really really old All-in-Wonder cards. NOTE: ALL of the All-in-Wonder cards, even the original 4MB one will give DVD hardware acceleration if you use the Gatos drivers. It's worth the effort if you have one of the oldies. |
From: <fre...@km...> - 2004-03-29 20:27:58
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by 69.196.182.170: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware The comment on the change is: formatting fix ------------------------------------------------------------------------------ @@ -142,41 +142,41 @@ NB: Utilisez ''xmodmap'' commme les instructions suggèrent pour configurer les touches de votre manette. + ===== Check that it works ===== 1. Use ''xev'' to verify funcitonality. This also gives you keycodes. See tutorial above. 2. If no output seen in ''xev'', the ''su'' to ''root'', and then run the following: -|| This is the expected output || -|| . || -|| # lsmod | grep ati || -|| ati_remote 6424 0 (unused) || -|| input 5664 0 [ati_remote keybdev mousedev hid] || -|| usbcore 72992 1 [ati_remote hid printer usb-uhci] || +{{{ This is the expected output }}} +{{{ . }}} +{{{ # lsmod | grep ati }}} +{{{ ati_remote 6424 0 (unused) }}} +{{{ input 5664 0 [ati_remote keybdev mousedev hid] }}} +{{{ usbcore 72992 1 [ati_remote hid printer usb-uhci] }}} 3. If you are like me, you will discover that nothing showed up. Now check if the module 'hid' is loaded: -|| This is the expected output || -|| . || -|| # lsmod | grep hid || -|| hid 20900 0 (unused) || -|| input 5664 0 [ati_remote keybdev mousedev hid] || -|| usbcore 72992 1 [ati_remote hid printer usb-uhci] || +{{{ This is the expected output }}} +{{{ . }}} +{{{ # lsmod | grep hid }}} +{{{ hid 20900 0 (unused) }}} +{{{ input 5664 0 [ati_remote keybdev mousedev hid] }}} +{{{ usbcore 72992 1 [ati_remote hid printer usb-uhci] }}} -4. Again, if you are like, you will discover that ''hid'' is not installed either. Probably somewhere around this point you will realize that you do not have anything in ''/dev/input/mice'' The simple solution is to simply type the following: +4. Again, if you are like me, you will discover that ''hid'' is not installed either. Probably somewhere around this point you will realize that you do not have anything in ''/dev/input/mice'' The simple solution is to simply type the following: -|| # modprobe hid || -|| # modprobe ati_remote || +{{{ # modprobe hid }}} +{{{ # modprobe ati_remote }}} And voila, it will work. 5. You do not want to do this everytime you load X, so a file called ''remote'' in the ''/etc/X11/xinit.d/'' directory with the follwing contents: -|| modprobe hid || -|| modprobe ati_radeon || +{{{ modprobe hid }}} +{{{ modprobe ati_radeon }}} 6. Finally, make this file executable by typing ''# chmod a+x /etc/X11/xinit.d/remote''. - == Drives == |
From: <fre...@km...> - 2004-03-29 20:24:58
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by 69.196.182.170: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware The comment on the change is: ati remote configuration without lirc ------------------------------------------------------------------------------ @@ -90,7 +90,8 @@ === ATI USB Remote === This remote is absolutely great. It is USB and has it's own receiver. However, it is an RF (radio frequency) receiver, as oppoased to an infrared receiver. There is a third-party hack to let it work with LIRC until support for this remote is included into the LIRC main branch. Here is how to get it working: -==== Requirements ==== +==== Installation Method One: Install using LIRC ==== +===== Requirements ===== 1. Linux system running devfs 2. Kernel source for your running kernel, located at '/usr/src/linux' (NOTE: This kernel source must have had at least 'make dep' run in it, so that the proper header files, etc. have been generated). 3. 'lirc-0.6.6' (or greater) from [http://lirc.sourceforge.net] @@ -98,7 +99,7 @@ 5. OPTIONAL: While in the CVS for 'ati_remote', you can grab the 'lircd.conf', but I have never had any luck getting it working; I have had to always generate my own. Your mileage may vary. 6. UPDATE: The lirc_usb.c is no longer available from either CVS or alternate sources (googled). The Gatos people seems to have integrated everything inte just one source file. Compliling the single source file ati_remote.c and running "insmod ati_remote.o" works. You just have to remember to recompile kernel with "input" and "USB" support. -==== Compilation ==== +===== Compilation ===== '''METHOD ONE:''' lirc is not already installed 1. Untar and uncompress 'lirc-0.6.6.tar.[gz|bz2]' 2. Copy 'lirc_usb.c' into one of the driver directories, and rename it to the same as whatever 'lirc_*.c' already exists in there. For example, if you copy into the 'drivers/lirc_sir' directory, you would rename the 'lirc_usb.c' file to 'lirc_sir.c' (This will overwrite the existing file 'lirc_*.c' file in the directrory) @@ -115,20 +116,68 @@ 5. Copy 'lirc_usb.o' to the '/lib/modules/<kernel_version>/misc' directory 6. Run 'depmod -a' -==== Configuration ==== +===== Configuration ===== 1. Load the module: 'modprobe lirc_usb debug=1' 2. Generate an 'lircd.conf' file for the remote: 'irrecord -d /dev/usb/remote0' (follow the instructions from 'irrecord') 3. Copy the resulting file to '/etc/lircd.conf' 4. Run '~freevo/helpers lircd2lircrc.pl' to generate an 'lircrc' file from your 'lircd.conf' file, that you can then put into '/etc/freevo' 5. Edit '/etc/freevo/lircrc' to change the name of some of the Freevo events to what Freevo is looking for, so as to have the remote work properly (refer to Freevo's sample 'lircrc' file for this) -==== Loading and Running ==== +===== Loading and Running ===== 1. Load the module: 'modprobe lirc_usb debug=1' 2. Start lirc: 'lircd -d /dev/usb/remote0 /etc/lircd.conf' 3. Confirm the remote is working properly by running 'irw' and pressing a few buttons Congratulations! You now have a working ATI USB remote for use with Freevo! - + +==== Installation Method Two: Without LIRC ==== + +===== Tutorial / Tutoriel ===== + +Follow the instructions on this page: http://remotew.free.fr/linux_en.htm + +Note: It is important to use ''xmodmap'' as suggested to configure keycodes + +Les mêmes instructions mais en français: http://remotew.free.fr/linux_fr.htm + +NB: Utilisez ''xmodmap'' commme les instructions suggèrent pour configurer les touches de votre manette. + +===== Check that it works ===== + +1. Use ''xev'' to verify funcitonality. This also gives you keycodes. See tutorial above. +2. If no output seen in ''xev'', the ''su'' to ''root'', and then run the following: + +|| This is the expected output || +|| . || +|| # lsmod | grep ati || +|| ati_remote 6424 0 (unused) || +|| input 5664 0 [ati_remote keybdev mousedev hid] || +|| usbcore 72992 1 [ati_remote hid printer usb-uhci] || + +3. If you are like me, you will discover that nothing showed up. Now check if the module 'hid' is loaded: + +|| This is the expected output || +|| . || +|| # lsmod | grep hid || +|| hid 20900 0 (unused) || +|| input 5664 0 [ati_remote keybdev mousedev hid] || +|| usbcore 72992 1 [ati_remote hid printer usb-uhci] || + +4. Again, if you are like, you will discover that ''hid'' is not installed either. Probably somewhere around this point you will realize that you do not have anything in ''/dev/input/mice'' The simple solution is to simply type the following: + +|| # modprobe hid || +|| # modprobe ati_remote || + +And voila, it will work. + +5. You do not want to do this everytime you load X, so a file called ''remote'' in the ''/etc/X11/xinit.d/'' directory with the follwing contents: + +|| modprobe hid || +|| modprobe ati_radeon || + +6. Finally, make this file executable by typing ''# chmod a+x /etc/X11/xinit.d/remote''. + + == Drives == These are devices that might require different setup than standard CR-ROM or DVD-ROM drives. |
From: <fre...@km...> - 2004-03-29 20:32:01
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by 69.196.182.170: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware The comment on the change is: another format fix ------------------------------------------------------------------------------ @@ -148,33 +148,41 @@ 1. Use ''xev'' to verify funcitonality. This also gives you keycodes. See tutorial above. 2. If no output seen in ''xev'', the ''su'' to ''root'', and then run the following: -{{{ This is the expected output }}} -{{{ . }}} -{{{ # lsmod | grep ati }}} -{{{ ati_remote 6424 0 (unused) }}} -{{{ input 5664 0 [ati_remote keybdev mousedev hid] }}} -{{{ usbcore 72992 1 [ati_remote hid printer usb-uhci] }}} +{{{ +This is the expected output +. +# lsmod | grep ati +ati_remote 6424 0 (unused) +input 5664 0 [ati_remote keybdev mousedev hid] +usbcore 72992 1 [ati_remote hid printer usb-uhci] +}}} 3. If you are like me, you will discover that nothing showed up. Now check if the module 'hid' is loaded: -{{{ This is the expected output }}} -{{{ . }}} -{{{ # lsmod | grep hid }}} -{{{ hid 20900 0 (unused) }}} -{{{ input 5664 0 [ati_remote keybdev mousedev hid] }}} -{{{ usbcore 72992 1 [ati_remote hid printer usb-uhci] }}} +{{{ + This is the expected output + . + # lsmod | grep hid + hid 20900 0 (unused) + input 5664 0 [ati_remote keybdev mousedev hid] + usbcore 72992 1 [ati_remote hid printer usb-uhci] +}}} 4. Again, if you are like me, you will discover that ''hid'' is not installed either. Probably somewhere around this point you will realize that you do not have anything in ''/dev/input/mice'' The simple solution is to simply type the following: -{{{ # modprobe hid }}} -{{{ # modprobe ati_remote }}} +{{{ + # modprobe hid + # modprobe ati_remote +}}} And voila, it will work. 5. You do not want to do this everytime you load X, so a file called ''remote'' in the ''/etc/X11/xinit.d/'' directory with the follwing contents: -{{{ modprobe hid }}} -{{{ modprobe ati_radeon }}} +{{{ + modprobe hid + modprobe ati_radeon +}}} 6. Finally, make this file executable by typing ''# chmod a+x /etc/X11/xinit.d/remote''. |
From: <fre...@km...> - 2004-05-10 20:30:35
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by 137.226.77.2: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware ------------------------------------------------------------------------------ @@ -64,6 +64,21 @@ In order to watch live TV with a PVR-250/350 the following 2 lines are needed in local_conf.py [[BR]]{{{plugin.remove('tv.mplayer')}}} [[BR]]{{{plugin.activate('tv.ivtv_basic_tv')}}} + +With (at least) 1.50-rc1 the above is no longer true, however the following VIDEO_GROUP setting is now necessary: + {{{ + VIDEO_GROUPS = [ + VideoGroup(vdev="/dev/video0", + adev=None, + input_type='tuner', + tuner_num=4, + tuner_norm=CONF.tv, + tuner_chanlist=CONF.chanlist, + desc='Cable', + group_type="ivtv", + recordable=True), + ] + }}} The MythTV site offers an excellent page that describes how to [http://www.mythtv.org/docs/mythtv-HOWTO-22.html#ss22.1 install a PVR-250/350 on Mandrake 9.1]. It may be helpful for other distros as well. |
From: <fre...@km...> - 2004-05-20 18:28:40
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by 62.109.113.182: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware ------------------------------------------------------------------------------ @@ -53,34 +53,36 @@ === Hauppauge WinTV-PVR Cards === -There is support for the WinTV-PVR series of cards. - -The WinTV-PVR card appears to possibly have some minimal support in the recent BTTV 0.9.x drivers. It appears the BTTV author ported some of the old code from the http://pvr.sourceforge.net project. - -The WinTV-PVR 250/350 cards have recently been getting a lot more attention. The drivers for these cards are under active development and are becoming stable. Please make sure your card and drivers are working properly before trying to use it in Freevo. For more information see http://ivtv.sourceforge.net . +There is support for the WinTV-PVR series of cards in Freevo; the WinTV-PVR 250/350 cards have recently been getting a lot more attention. The drivers for these cards are under active development and are becoming stable, see http://ivtv.sourceforge.net . Please make sure your card and the ivtv driver are working properly before trying to use it in Freevo. That is, download and install the latest ivtv driver; you'll find information on this in the [http://ivtv.sourceforge.net/docs.html IVTV documentation] and the [http://ivtv.sourceforge.net/tiki/tiki-view_faq.php?faqId=1 IVTV FAQ]. Basically, this boils down to: + * Compiling and installing the modules (i.e. make && make install) + * Making sure you have the firmware for the cards in /lib/modules. There is a utility included with the driver package that will help you with this called ivtvfwextract.pl. Run it with the location of the windows driver package as its only argument (defaults to /mnt/cdrom) and it will do the rest. + * Loading and testing the driver + * Putting the options and module dependancies into your modules.conf file + * Setting up the module(s) for autoloading on boot +The MythTV site offers an excellent page that describes how to [http://www.mythtv.org/docs/mythtv-HOWTO-22.html#ss22.1 install a PVR-250/350 on Mandrake 9.1]. It may be helpful for other distros as well. -In order to record using the PVR-250/350 cards please read the information in the Recording Server section above. +In order to record using the PVR-250/350 cards with Freevo please read the IVTV section in RecordingInfo, too. -In order to watch live TV with a PVR-250/350 the following 2 lines are needed in local_conf.py -[[BR]]{{{plugin.remove('tv.mplayer')}}} -[[BR]]{{{plugin.activate('tv.ivtv_basic_tv')}}} +In order to watch live TV with a PVR-250/350, the following 2 lines are needed in local_conf.py with older Freevo versions: +{{{plugin.remove('tv.mplayer') +plugin.activate('tv.ivtv_basic_tv')}}} -With (at least) 1.50-rc1 the above is no longer true, however the following VIDEO_GROUP setting is now necessary: - {{{ - VIDEO_GROUPS = [ - VideoGroup(vdev="/dev/video0", - adev=None, - input_type='tuner', - tuner_num=4, - tuner_norm=CONF.tv, - tuner_chanlist=CONF.chanlist, - desc='Cable', - group_type="ivtv", - recordable=True), - ] - }}} +With (at least) 1.50-rc1 the above is no longer true, however the following VIDEO_GROUP setting is now necessary (again, see RecordingInfo): +{{{VIDEO_GROUPS = [ + VideoGroup(vdev="/dev/video0", + adev=None, + input_type='tuner', + tuner_num=4, + tuner_norm=CONF.tv, + tuner_chanlist=CONF.chanlist, + desc='Cable', + group_type="ivtv", + recordable=True), + ]}}} -The MythTV site offers an excellent page that describes how to [http://www.mythtv.org/docs/mythtv-HOWTO-22.html#ss22.1 install a PVR-250/350 on Mandrake 9.1]. It may be helpful for other distros as well. +The WinTV-PVR card appears to possibly have some minimal support in the recent BTTV 0.9.x drivers. It appears the BTTV author ported some of the old code from the http://pvr.sourceforge.net project. According to the latter site, this would allow to use standard V4L TV software (xawtv, tvtime, ...). Please add information to this wiki page if you know more about this. + +Otherwise, the current status is that the card will '''not''' deliver the right output on `/dev/video0` for those TV applications to work. Depending on your settings (this can be changed via ioctl's, see the test_ioctl utility from the IVTV driver), `/dev/video0` will probably already give an MPEG2 stream that can be played with Mplayer for example ("`mplayer -v - < /dev/video0`", more sophisticated commands are used by Freevo). Freevo has IVTV driver support, that is, it will issue the right IOCTL commands to set up your card, change the channels and so on. (See the example local_config.py; the output of test_ioctl will help a lot in choosing the right parameters.) === ATI All-in-Wonder Models === |
From: <fre...@km...> - 2004-05-20 18:57:41
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by 62.109.113.182: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware The comment on the change is: Again updated IVTV section, this time LIRC-help ------------------------------------------------------------------------------ @@ -60,6 +60,8 @@ * Putting the options and module dependancies into your modules.conf file * Setting up the module(s) for autoloading on boot The MythTV site offers an excellent page that describes how to [http://www.mythtv.org/docs/mythtv-HOWTO-22.html#ss22.1 install a PVR-250/350 on Mandrake 9.1]. It may be helpful for other distros as well. + +After setting up the IVTV driver, you might want to set up LIRC, too. My lirc came with a suitable lircd.conf.hauppauge config file which actually contains two separate descriptions of remote controls. The second one matches my remote (that came with the PVR 350), and I offer my matching `/etc/freevo/lircrc` [attachment:_etc_freevo_lircrc as an attachment here]. In order to record using the PVR-250/350 cards with Freevo please read the IVTV section in RecordingInfo, too. |
From: <fre...@km...> - 2004-05-20 19:23:42
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by 62.109.113.182: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware The comment on the change is: corrected attachment: Vol+ -> VOL+ ------------------------------------------------------------------------------ @@ -61,7 +61,7 @@ * Setting up the module(s) for autoloading on boot The MythTV site offers an excellent page that describes how to [http://www.mythtv.org/docs/mythtv-HOWTO-22.html#ss22.1 install a PVR-250/350 on Mandrake 9.1]. It may be helpful for other distros as well. -After setting up the IVTV driver, you might want to set up LIRC, too. My lirc came with a suitable lircd.conf.hauppauge config file which actually contains two separate descriptions of remote controls. The second one matches my remote (that came with the PVR 350), and I offer my matching `/etc/freevo/lircrc` [attachment:_etc_freevo_lircrc as an attachment here]. +After setting up the IVTV driver, you might want to set up LIRC, too. My lirc came with a suitable lircd.conf.hauppauge config file which actually contains two separate descriptions of remote controls. The second one matches my remote (that came with the PVR 350), and I offer my matching `/etc/freevo/lircrc` [attachment:_etc_freevo_lircrc_corrected as an attachment here]. In order to record using the PVR-250/350 cards with Freevo please read the IVTV section in RecordingInfo, too. |
From: <fre...@km...> - 2004-05-21 09:41:55
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by 134.100.12.204: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware The comment on the change is: Added TV-out information to WinTV PVR section, structured ------------------------------------------------------------------------------ @@ -53,7 +53,11 @@ === Hauppauge WinTV-PVR Cards === -There is support for the WinTV-PVR series of cards in Freevo; the WinTV-PVR 250/350 cards have recently been getting a lot more attention. The drivers for these cards are under active development and are becoming stable, see http://ivtv.sourceforge.net . Please make sure your card and the ivtv driver are working properly before trying to use it in Freevo. That is, download and install the latest ivtv driver; you'll find information on this in the [http://ivtv.sourceforge.net/docs.html IVTV documentation] and the [http://ivtv.sourceforge.net/tiki/tiki-view_faq.php?faqId=1 IVTV FAQ]. Basically, this boils down to: +There is support for the WinTV-PVR series of cards in Freevo; the WinTV-PVR 250/350 cards have recently been getting a lot more attention. + +==== IVTV Driver ==== + +The drivers for these cards are under active development and are becoming stable, see http://ivtv.sourceforge.net . Please make sure your card and the ivtv driver are working properly before trying to use it in Freevo. That is, download and install the latest ivtv driver; you'll find information on this in the [http://ivtv.sourceforge.net/docs.html IVTV documentation] and the [http://ivtv.sourceforge.net/tiki/tiki-view_faq.php?faqId=1 IVTV FAQ]. Basically, this boils down to: * Compiling and installing the modules (i.e. make && make install) * Making sure you have the firmware for the cards in /lib/modules. There is a utility included with the driver package that will help you with this called ivtvfwextract.pl. Run it with the location of the windows driver package as its only argument (defaults to /mnt/cdrom) and it will do the rest. * Loading and testing the driver @@ -61,8 +65,12 @@ * Setting up the module(s) for autoloading on boot The MythTV site offers an excellent page that describes how to [http://www.mythtv.org/docs/mythtv-HOWTO-22.html#ss22.1 install a PVR-250/350 on Mandrake 9.1]. It may be helpful for other distros as well. +==== LIRC / WinTV PCR remote control ==== + After setting up the IVTV driver, you might want to set up LIRC, too. My lirc came with a suitable lircd.conf.hauppauge config file which actually contains two separate descriptions of remote controls. The second one matches my remote (that came with the PVR 350), and I offer my matching `/etc/freevo/lircrc` [attachment:_etc_freevo_lircrc_corrected as an attachment here]. - + +==== Freevo setup for IVTV ==== + In order to record using the PVR-250/350 cards with Freevo please read the IVTV section in RecordingInfo, too. In order to watch live TV with a PVR-250/350, the following 2 lines are needed in local_conf.py with older Freevo versions: @@ -81,6 +89,12 @@ group_type="ivtv", recordable=True), ]}}} + +==== TV-Out ==== + +If you want Freevo to use the WinTV PVR card's TV-out, you can use the TV-out as a standard framebuffer device for X. Once you get X working with this framebuffer device freevo works with it just like any other X display. This is explained in the [http://ivtv.writeme.ch/tiki-index.php?page=TvOutHowto TvOutHowto page of the IVTV Wiki]. + +==== Misc. Information ==== The WinTV-PVR card appears to possibly have some minimal support in the recent BTTV 0.9.x drivers. It appears the BTTV author ported some of the old code from the http://pvr.sourceforge.net project. According to the latter site, this would allow to use standard V4L TV software (xawtv, tvtime, ...). Please add information to this wiki page if you know more about this. |
From: <fre...@km...> - 2004-07-20 09:44:20
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by 80.4.224.4: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware No differences found! |
From: <fre...@km...> - 2004-07-24 11:45:59
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by Bastian: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware ------------------------------------------------------------------------------ @@ -81,7 +81,7 @@ VideoGroup(vdev="/dev/video0", adev=None, input_type='tuner', - tuner_num=4, + input_num=4, tuner_norm=CONF.tv, tuner_chanlist=CONF.chanlist, desc='Cable', |
From: <fre...@km...> - 2004-12-25 03:52:46
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by 60.25.124.202: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware ------------------------------------------------------------------------------ @@ -228,3 +228,406 @@ http://www.shop263.com/i-42/1.htm +[http://www.3333888888.com/dzdg003/001.htm 承接监控] +[http://www.3333888888.com/dzdg003/002.htm 承接强电工程] +[http://www.3333888888.com/dzdg003/003.htm 城市电轨车] +[http://www.3333888888.com/dzdg003/004.htm 城市轻轨] +[http://www.3333888888.com/dzdg003/005.htm 城域网] +[http://www.3333888888.com/dzdg003/006.htm 城镇生活垃圾发电] +[http://www.3333888888.com/dzdg003/007.htm 程控] +[http://www.3333888888.com/dzdg003/008.htm 程控变频电源] +[http://www.3333888888.com/dzdg003/009.htm 程控调度机] +[http://www.3333888888.com/dzdg003/010.htm 程控交换机] +[http://www.3333888888.com/dzdg003/011.htm 程控交换机集团电话] +[http://www.3333888888.com/dzdg003/012.htm 程控交换机系统] +[http://www.3333888888.com/dzdg003/013.htm 程序共享] +[http://www.3333888888.com/dzdg003/014.htm 齿轮减速电机] +[http://www.3333888888.com/dzdg003/015.htm 齿轮减速电子调速电机] +[http://www.3333888888.com/dzdg003/016.htm 齿轮减速动机] +[http://www.3333888888.com/dzdg003/017.htm 齿轮减速器] +[http://www.3333888888.com/dzdg003/018.htm 齿轮马达] +[http://www.3333888888.com/dzdg003/019.htm 齿轮箱电机] +[http://www.3333888888.com/dzdg003/020.htm 翅片元件] +[http://www.3333888888.com/dzdg003/021.htm 充磁电源] +[http://www.3333888888.com/dzdg003/022.htm 充磁机] +[http://www.3333888888.com/dzdg003/023.htm 充电电池] +[http://www.3333888888.com/dzdg003/024.htm 充电机] +[http://www.3333888888.com/dzdg003/025.htm 充电器] +[http://www.3333888888.com/dzdg003/026.htm 充电式手电筒] +[http://www.3333888888.com/dzdg003/027.htm 充电座] +[http://www.3333888888.com/dzdg003/028.htm 充放电设备] +[http://www.3333888888.com/dzdg003/029.htm 充气泵] +[http://www.3333888888.com/dzdg003/030.htm 充退磁机] +[http://www.3333888888.com/dzdg003/031.htm 充值机] +[http://www.3333888888.com/dzdg003/032.htm 冲击抗扰性设备] +[http://www.3333888888.com/dzdg003/033.htm 冲压] +[http://www.3333888888.com/dzdg003/034.htm 冲压件] +[http://www.3333888888.com/dzdg003/035.htm 冲牙器] +[http://www.3333888888.com/dzdg003/036.htm 宠物] +[http://www.3333888888.com/dzdg003/037.htm 宠物收音机] +[http://www.3333888888.com/dzdg003/038.htm 抽水蓄能电站] +[http://www.3333888888.com/dzdg003/039.htm 抽油烟机] +[http://www.3333888888.com/dzdg003/040.htm 臭氧] +[http://www.3333888888.com/dzdg003/041.htm 臭氧发生机] +[http://www.3333888888.com/dzdg003/042.htm 臭氧发生片] +[http://www.3333888888.com/dzdg003/043.htm 臭氧发生器] +[http://www.3333888888.com/dzdg003/044.htm 臭氧机] +[http://www.3333888888.com/dzdg003/045.htm 臭氧解毒机] +[http://www.3333888888.com/dzdg003/046.htm 出币机] +[http://www.3333888888.com/dzdg003/047.htm 出入口控制] +[http://www.3333888888.com/dzdg003/048.htm 出租车顶灯] +[http://www.3333888888.com/dzdg003/049.htm 出租汽车计费器] +[http://www.3333888888.com/dzdg003/050.htm 初高中演示电表] +[http://www.3333888888.com/dzdg003/051.htm 除尘] +[http://www.3333888888.com/dzdg003/052.htm 除沫器除雾器] +[http://www.3333888888.com/dzdg003/053.htm 除湿书柜] +[http://www.3333888888.com/dzdg003/054.htm 除湿套件] +[http://www.3333888888.com/dzdg003/055.htm 除霜器] +[http://www.3333888888.com/dzdg003/056.htm 除铁器] +[http://www.3333888888.com/dzdg003/057.htm 除铁设备] +[http://www.3333888888.com/dzdg003/058.htm 除污机] +[http://www.3333888888.com/dzdg003/059.htm 厨卫] +[http://www.3333888888.com/dzdg003/060.htm 橱柜] +[http://www.3333888888.com/dzdg003/061.htm 储能式点焊机] +[http://www.3333888888.com/dzdg003/062.htm 处理器] +[http://www.3333888888.com/dzdg003/063.htm 触发器] +[http://www.3333888888.com/dzdg003/064.htm 触摸查询机] +[http://www.3333888888.com/dzdg003/065.htm 触摸查询一体机] +[http://www.3333888888.com/dzdg003/066.htm 触摸屏] +[http://www.3333888888.com/dzdg003/067.htm 触摸台灯] +[http://www.3333888888.com/dzdg003/068.htm 触摸信息查询一体机] +[http://www.3333888888.com/dzdg003/069.htm 穿孔器] +[http://www.3333888888.com/dzdg003/070.htm 传感器] +[http://www.3333888888.com/dzdg003/071.htm 传感器开关] +[http://www.3333888888.com/dzdg003/072.htm 传感器模块] +[http://www.3333888888.com/dzdg003/073.htm 传感设备] +[http://www.3333888888.com/dzdg003/074.htm 传感线] +[http://www.3333888888.com/dzdg003/075.htm 传输] +[http://www.3333888888.com/dzdg003/076.htm 传真机] +[http://www.3333888888.com/dzdg003/077.htm 传真机电源] +[http://www.3333888888.com/dzdg003/078.htm 传真卡] +[http://www.3333888888.com/dzdg003/079.htm 传真数据] +[http://www.3333888888.com/dzdg003/080.htm 船舶设备] +[http://www.3333888888.com/dzdg003/081.htm 船舶自动识别系统] +[http://www.3333888888.com/dzdg003/082.htm 船外机] +[http://www.3333888888.com/dzdg003/083.htm 船形开关] +[http://www.3333888888.com/dzdg003/084.htm 船用] +[http://www.3333888888.com/dzdg003/085.htm 船用电机] +[http://www.3333888888.com/dzdg003/086.htm 船用电缆] +[http://www.3333888888.com/dzdg003/087.htm 船用电器] +[http://www.3333888888.com/dzdg003/088.htm 船用电源] +[http://www.3333888888.com/dzdg003/089.htm 船用压力控制器] +[http://www.3333888888.com/dzdg003/090.htm 船载航行数据记录仪] +[http://www.3333888888.com/dzdg003/091.htm 串激式电机] +[http://www.3333888888.com/dzdg003/092.htm 串联式电伴热带] +[http://www.3333888888.com/dzdg003/093.htm 串联式电热带] +[http://www.3333888888.com/dzdg003/094.htm 床头集控开关] +[http://www.3333888888.com/dzdg003/095.htm 吹发器] +[http://www.3333888888.com/dzdg003/096.htm 垂熔炉] +[http://www.3333888888.com/dzdg003/097.htm 椿本链条] +[http://www.3333888888.com/dzdg003/098.htm 纯白光] +[http://www.3333888888.com/dzdg003/099.htm 纯钢管自来水管道] +[http://www.3333888888.com/dzdg003/100.htm 纯蓝发射管] +[http://www.3333888888.com/dzdg003/101.htm 纯镍线] +[http://www.3333888888.com/dzdg003/102.htm 纯软件视频会议系统] +[http://www.3333888888.com/dzdg003/103.htm 纯水机] +[http://www.3333888888.com/dzdg003/104.htm 纯自然光源灯管] +[http://www.3333888888.com/dzdg003/105.htm 瓷棒] +[http://www.3333888888.com/dzdg003/106.htm 瓷插座] +[http://www.3333888888.com/dzdg003/107.htm 瓷灯头] +[http://www.3333888888.com/dzdg003/108.htm 瓷灯座] +[http://www.3333888888.com/dzdg003/109.htm 瓷管] +[http://www.3333888888.com/dzdg003/110.htm 瓷环填料] +[http://www.3333888888.com/dzdg003/111.htm 瓷接器] +[http://www.3333888888.com/dzdg003/112.htm 瓷泥] +[http://www.3333888888.com/dzdg003/113.htm 瓷球] +[http://www.3333888888.com/dzdg003/114.htm 瓷球瓷衬] +[http://www.3333888888.com/dzdg003/115.htm 瓷球拱] +[http://www.3333888888.com/dzdg003/116.htm 瓷球填料] +[http://www.3333888888.com/dzdg003/117.htm 瓷砂] +[http://www.3333888888.com/dzdg003/118.htm 瓷烧结窑] +[http://www.3333888888.com/dzdg003/119.htm 瓷外套] +[http://www.3333888888.com/dzdg003/120.htm 瓷杂件] +[http://www.3333888888.com/dzdg003/121.htm 瓷质抛光砖] +[http://www.3333888888.com/dzdg003/122.htm 瓷砖] +[http://www.3333888888.com/dzdg003/123.htm 磁棒] +[http://www.3333888888.com/dzdg003/124.htm 磁保持继电器] +[http://www.3333888888.com/dzdg003/125.htm 磁测量设备] +[http://www.3333888888.com/dzdg003/126.htm 磁带机芯] +[http://www.3333888888.com/dzdg003/127.htm 磁电机] +[http://www.3333888888.com/dzdg003/128.htm 磁滚筒] +[http://www.3333888888.com/dzdg003/129.htm 磁环] +[http://www.3333888888.com/dzdg003/130.htm 磁卡] +[http://www.3333888888.com/dzdg003/131.htm 磁卡电开水器] +[http://www.3333888888.com/dzdg003/132.htm 磁卡读写器] +[http://www.3333888888.com/dzdg003/133.htm 磁卡读写设备] +[http://www.3333888888.com/dzdg003/134.htm 磁卡阅读器] +[http://www.3333888888.com/dzdg003/135.htm 磁控软起动] +[http://www.3333888888.com/dzdg003/136.htm 磁力扣] +[http://www.3333888888.com/dzdg003/137.htm 磁力起动器] +[http://www.3333888888.com/dzdg003/138.htm 磁力锁] +[http://www.3333888888.com/dzdg003/139.htm 磁盘阵列机箱] +[http://www.3333888888.com/dzdg003/140.htm 磁片] +[http://www.3333888888.com/dzdg003/141.htm 磁条] +[http://www.3333888888.com/dzdg003/142.htm 磁条读写器] +[http://www.3333888888.com/dzdg003/143.htm 磁条卡] +[http://www.3333888888.com/dzdg003/144.htm 磁铁] +[http://www.3333888888.com/dzdg003/145.htm 磁通计] +[http://www.3333888888.com/dzdg003/146.htm 磁头] +[http://www.3333888888.com/dzdg003/147.htm 磁头等] +[http://www.3333888888.com/dzdg003/148.htm 磁头芯片] +[http://www.3333888888.com/dzdg003/149.htm 磁心振荡变压器] +[http://www.3333888888.com/dzdg003/150.htm 磁芯] +[http://www.3333888888.com/dzdg003/151.htm 磁性材料] +[http://www.3333888888.com/dzdg003/152.htm 磁性电加热器] +[http://www.3333888888.com/dzdg003/153.htm 磁性液体旋转密封装置] +[http://www.3333888888.com/dzdg003/154.htm 磁悬浮电机] +[http://www.3333888888.com/dzdg003/155.htm 磁悬浮工艺品] +[http://www.3333888888.com/dzdg003/156.htm 磁选机] +[http://www.3333888888.com/dzdg003/157.htm 磁选设备] +[http://www.3333888888.com/dzdg003/158.htm 磁滞回线仪] +[http://www.3333888888.com/dzdg003/159.htm 磁滞曲线仪] +[http://www.3333888888.com/dzdg003/160.htm 磁滞式卷筒] +[http://www.3333888888.com/dzdg003/161.htm 粗糙度仪] +[http://www.3333888888.com/dzdg003/162.htm 淬火] +[http://www.3333888888.com/dzdg003/163.htm 淬火机床] +[http://www.3333888888.com/dzdg003/164.htm 淬火炉] +[http://www.3333888888.com/dzdg003/165.htm 淬火设备] +[http://www.3333888888.com/dzdg003/166.htm 存储器] +[http://www.3333888888.com/dzdg003/167.htm 存储设备] +[http://www.3333888888.com/dzdg003/168.htm 打标机] +[http://www.3333888888.com/dzdg003/169.htm 打蛋机] +[http://www.3333888888.com/dzdg003/170.htm 打点器] +[http://www.3333888888.com/dzdg003/171.htm 打号机] +[http://www.3333888888.com/dzdg003/172.htm 打卡机] +[http://www.3333888888.com/dzdg003/173.htm 打铃器] +[http://www.3333888888.com/dzdg003/174.htm 打铃仪] +[http://www.3333888888.com/dzdg003/175.htm 打码机] +[http://www.3333888888.com/dzdg003/176.htm 打气筒] +[http://www.3333888888.com/dzdg003/177.htm 打印耗材] +[http://www.3333888888.com/dzdg003/178.htm 打印机] +[http://www.3333888888.com/dzdg003/179.htm 打印机扫描枪] +[http://www.3333888888.com/dzdg003/180.htm 打印软件] +[http://www.3333888888.com/dzdg003/181.htm 打印色带] +[http://www.3333888888.com/dzdg003/182.htm 打印设备] +[http://www.3333888888.com/dzdg003/183.htm 大冰箱] +[http://www.3333888888.com/dzdg003/184.htm 大高杆灯] +[http://www.3333888888.com/dzdg003/185.htm 大功率] +[http://www.3333888888.com/dzdg003/186.htm 大功率充磁机] +[http://www.3333888888.com/dzdg003/187.htm 大功率电镀电源] +[http://www.3333888888.com/dzdg003/188.htm 大功率电镀用高频整流机电源] +[http://www.3333888888.com/dzdg003/189.htm 大功率电力补偿稳压器] +[http://www.3333888888.com/dzdg003/190.htm 大功率电力稳压器] +[http://www.3333888888.com/dzdg003/191.htm 大功率电器调动调光柜] +[http://www.3333888888.com/dzdg003/192.htm 大功率电热元件] +[http://www.3333888888.com/dzdg003/193.htm 大功率交流补偿式静化稳压电源] +[http://www.3333888888.com/dzdg003/194.htm 大功率扩音机] +[http://www.3333888888.com/dzdg003/195.htm 大功率微波能] +[http://www.3333888888.com/dzdg003/196.htm 大件物品] +[http://www.3333888888.com/dzdg003/197.htm 大客户抄表] +[http://www.3333888888.com/dzdg003/198.htm 大口径光纤] +[http://www.3333888888.com/dzdg003/199.htm 大立式电机] +[http://www.3333888888.com/dzdg003/200.htm 大棚] +[http://www.3333888888.com/dzdg003/201.htm 大屏幕] +[http://www.3333888888.com/dzdg003/202.htm 大屏幕背投拼接显示系统] +[http://www.3333888888.com/dzdg203/001.htm 大屏幕背投显示器] +[http://www.3333888888.com/dzdg003/204.htm 大屏幕背投显示终端] +[http://www.3333888888.com/dzdg003/205.htm 大屏幕等离子] +[http://www.3333888888.com/dzdg003/206.htm 大屏幕电子图文显示系统] +[http://www.3333888888.com/dzdg003/207.htm 大屏幕拼接] +[http://www.3333888888.com/dzdg003/208.htm 大屏幕拼接电视墙] +[http://www.3333888888.com/dzdg003/209.htm 大屏幕拼接控制器] +[http://www.3333888888.com/dzdg003/210.htm 大屏幕拼接墙] +[http://www.3333888888.com/dzdg003/211.htm 大屏幕拼接显示墙] +[http://www.3333888888.com/dzdg003/212.htm 大屏幕墙上电脑] +[http://www.3333888888.com/dzdg003/213.htm 大屏幕设备] +[http://www.3333888888.com/dzdg003/214.htm 大屏幕数字信息显示] +[http://www.3333888888.com/dzdg003/215.htm 大屏幕投影] +[http://www.3333888888.com/dzdg003/216.htm 大屏幕投影墙] +[http://www.3333888888.com/dzdg003/217.htm 大屏幕投影墙控制系统] +[http://www.3333888888.com/dzdg003/218.htm 大屏幕投影系统] +[http://www.3333888888.com/dzdg003/219.htm 大屏幕投影显示系统] +[http://www.3333888888.com/dzdg003/220.htm 大屏幕系统] +[http://www.3333888888.com/dzdg003/221.htm 大屏幕显示背投拼接] +[http://www.3333888888.com/dzdg003/222.htm 大屏幕显示系统] +[http://www.3333888888.com/dzdg003/223.htm 大屏幕显示终端] +[http://www.3333888888.com/dzdg003/224.htm 大热处理机组] +[http://www.3333888888.com/dzdg003/225.htm 大头灯泡] +[http://www.3333888888.com/dzdg003/226.htm 大头贴机] +[http://www.3333888888.com/dzdg003/227.htm 大用户电表数据采集系统] +[http://www.3333888888.com/dzdg003/228.htm 大中电子电工] +[http://www.3333888888.com/dzdg003/229.htm 代理存折] +[http://www.3333888888.com/dzdg003/230.htm 带材单张退火炉] +[http://www.3333888888.com/dzdg003/231.htm 带灯水晶] +[http://www.3333888888.com/dzdg003/232.htm 带电作业工具] +[http://www.3333888888.com/dzdg003/233.htm 带电作业工器具] +[http://www.3333888888.com/dzdg003/234.htm 带钢] +[http://www.3333888888.com/dzdg003/235.htm 推板式隧道电阻炉气氛保护炉] +[http://www.3333888888.com/dzdg003/236.htm 单臂灯] +[http://www.3333888888.com/dzdg003/237.htm 单变色装饰灯] +[http://www.3333888888.com/dzdg003/238.htm 单槽] +[http://www.3333888888.com/dzdg003/239.htm 单槽清洗机] +[http://www.3333888888.com/dzdg003/240.htm 单端灯] +[http://www.3333888888.com/dzdg003/241.htm 单端元件] +[http://www.3333888888.com/dzdg003/242.htm 单管通信塔] +[http://www.3333888888.com/dzdg003/243.htm 单极安全滑触线装置] +[http://www.3333888888.com/dzdg003/244.htm 单极滑触线] +[http://www.3333888888.com/dzdg003/245.htm 单极组合式] +[http://www.3333888888.com/dzdg003/246.htm 单晶] +[http://www.3333888888.com/dzdg003/247.htm 单晶片] +[http://www.3333888888.com/dzdg003/248.htm 单控开关制开关插座] +[http://www.3333888888.com/dzdg003/249.htm 单片机] +[http://www.3333888888.com/dzdg003/250.htm 单片机控制] +[http://www.3333888888.com/dzdg003/251.htm 单三相发电机] +[http://www.3333888888.com/dzdg003/252.htm 单三相感应电动机] +[http://www.3333888888.com/dzdg003/253.htm 单三相同期表] +[http://www.3333888888.com/dzdg003/254.htm 单三相智能调压模块] +[http://www.3333888888.com/dzdg003/255.htm 单色电子显示屏] +[http://www.3333888888.com/dzdg003/256.htm 单双臂灯] +[http://www.3333888888.com/dzdg003/257.htm 单双罐滚筒炉] +[http://www.3333888888.com/dzdg003/258.htm 单双梁控制柜] +[http://www.3333888888.com/dzdg003/259.htm 单双色显示屏] +[http://www.3333888888.com/dzdg003/260.htm 单头管] +[http://www.3333888888.com/dzdg003/261.htm 单头金属电热管] +[http://www.3333888888.com/dzdg003/262.htm 单相电容运转感应电机] +[http://www.3333888888.com/dzdg003/263.htm 单相交流稳压电源] +[http://www.3333888888.com/dzdg003/264.htm 单相交流稳压净化电源] +[http://www.3333888888.com/dzdg003/265.htm 单相两极两极带接地移动式电源插座] +[http://www.3333888888.com/dzdg003/266.htm 单相小功率电机] +[http://www.3333888888.com/dzdg003/267.htm 单芯] +[http://www.3333888888.com/dzdg003/268.htm 单元板] +[http://www.3333888888.com/dzdg003/269.htm 单轴控制器] +[http://www.3333888888.com/dzdg003/270.htm 弹操机构] +[http://www.3333888888.com/dzdg003/271.htm 弹簧平衡器] +[http://www.3333888888.com/dzdg003/272.htm 弹性接手] +[http://www.3333888888.com/dzdg003/273.htm 氮化硅] +[http://www.3333888888.com/dzdg003/274.htm 氮化炉] +[http://www.3333888888.com/dzdg003/275.htm 氮化铝] +[http://www.3333888888.com/dzdg003/276.htm 氮化铝基板] +[http://www.3333888888.com/dzdg003/277.htm 挡车器] +[http://www.3333888888.com/dzdg003/278.htm 档案密集柜] +[http://www.3333888888.com/dzdg003/279.htm 刀开关] +[http://www.3333888888.com/dzdg003/280.htm 氘灯] +[http://www.3333888888.com/dzdg003/281.htm 导爆管] +[http://www.3333888888.com/dzdg003/282.htm 导电材料导电布] +[http://www.3333888888.com/dzdg003/283.htm 导电膏] +[http://www.3333888888.com/dzdg003/284.htm 导电泡棉] +[http://www.3333888888.com/dzdg003/285.htm 导电泡棉导电胶带铍铜弹簧片] +[http://www.3333888888.com/dzdg003/286.htm 导电橡胶] +[http://www.3333888888.com/dzdg003/287.htm 导电橡胶电极] +[http://www.3333888888.com/dzdg003/288.htm 导电橡胶连接器] +[http://www.3333888888.com/dzdg003/289.htm 导管式] +[http://www.3333888888.com/dzdg003/290.htm 导管式安全滑触线] +[http://www.3333888888.com/dzdg003/291.htm 导轨淬火] +[http://www.3333888888.com/dzdg003/292.htm 导轨工作台机器人] +[http://www.3333888888.com/dzdg003/293.htm 导航] +[http://www.3333888888.com/dzdg003/294.htm 导航软件] +[http://www.3333888888.com/dzdg003/295.htm 导频控制收发设备] +[http://www.3333888888.com/dzdg003/296.htm 导热材料] +[http://www.3333888888.com/dzdg003/297.htm 导热绝缘橡胶] +[http://www.3333888888.com/dzdg003/298.htm 导热油] +[http://www.3333888888.com/dzdg003/299.htm 导热油炉] +[http://www.3333888888.com/dzdg003/300.htm 导线] +[http://www.3333888888.com/dzdg003/301.htm 导线钳] +[http://www.3333888888.com/dzdg003/302.htm 导游机] +[http://www.3333888888.com/dzdg303/001.htm 倒车灯开关] +[http://www.3333888888.com/dzdg003/304.htm 倒车后视仪] +[http://www.3333888888.com/dzdg003/305.htm 倒车雷达] +[http://www.3333888888.com/dzdg003/306.htm 道路灯] +[http://www.3333888888.com/dzdg003/307.htm 道路监控] +[http://www.3333888888.com/dzdg003/308.htm 道路交通电子设备] +[http://www.3333888888.com/dzdg003/309.htm 道路收费监控系统] +[http://www.3333888888.com/dzdg003/310.htm 道路停车收费设备] +[http://www.3333888888.com/dzdg003/311.htm 道路照明] +[http://www.3333888888.com/dzdg003/312.htm 道路照明灯杆] +[http://www.3333888888.com/dzdg003/313.htm 道闸] +[http://www.3333888888.com/dzdg003/314.htm 德国宝] +[http://www.3333888888.com/dzdg003/315.htm 德力西电器] +[http://www.3333888888.com/dzdg003/316.htm 德语电子词典] +[http://www.3333888888.com/dzdg003/317.htm 灯串控制用电源] +[http://www.3333888888.com/dzdg003/318.htm 灯带] +[http://www.3333888888.com/dzdg003/319.htm 灯杆] +[http://www.3333888888.com/dzdg003/320.htm 灯管] +[http://www.3333888888.com/dzdg003/321.htm 灯光节电器] +[http://www.3333888888.com/dzdg003/322.htm 灯光控制器] +[http://www.3333888888.com/dzdg003/323.htm 灯光音响] +[http://www.3333888888.com/dzdg003/324.htm 灯光照明] +[http://www.3333888888.com/dzdg003/325.htm 灯架] +[http://www.3333888888.com/dzdg003/326.htm 灯具] +[http://www.3333888888.com/dzdg003/327.htm 灯具配件] +[http://www.3333888888.com/dzdg003/328.htm 灯具软管] +[http://www.3333888888.com/dzdg003/329.htm 灯具外壳] +[http://www.3333888888.com/dzdg003/330.htm 灯盘] +[http://www.3333888888.com/dzdg003/331.htm 灯泡] +[http://www.3333888888.com/dzdg003/332.htm 灯泡导丝] +[http://www.3333888888.com/dzdg003/333.htm 灯泡灯] +[http://www.3333888888.com/dzdg003/334.htm 灯饰] +[http://www.3333888888.com/dzdg003/335.htm 灯饰管] +[http://www.3333888888.com/dzdg003/336.htm 灯饰家电配件] +[http://www.3333888888.com/dzdg003/337.htm 灯饰配件] +[http://www.3333888888.com/dzdg003/338.htm 灯塔] +[http://www.3333888888.com/dzdg003/339.htm 灯头] +[http://www.3333888888.com/dzdg003/340.htm 灯箱] +[http://www.3333888888.com/dzdg003/341.htm 灯箱灯] +[http://www.3333888888.com/dzdg003/342.htm 灯艺] +[http://www.3333888888.com/dzdg003/343.htm 灯柱] +[http://www.3333888888.com/dzdg003/344.htm 灯座] +[http://www.3333888888.com/dzdg003/345.htm 灯座陶瓷] +[http://www.3333888888.com/dzdg003/346.htm 等电位连接器] +[http://www.3333888888.com/dzdg003/347.htm 等径路灯杆] +[http://www.3333888888.com/dzdg003/348.htm 等离子] +[http://www.3333888888.com/dzdg003/349.htm 等离子屏] +[http://www.3333888888.com/dzdg003/350.htm 等离子屏架] +[http://www.3333888888.com/dzdg003/351.htm 等离子切割] +[http://www.3333888888.com/dzdg003/352.htm 等离子体] +[http://www.3333888888.com/dzdg003/353.htm 等离子体设备] +[http://www.3333888888.com/dzdg003/354.htm 等离子显示屏] +[http://www.3333888888.com/dzdg003/355.htm 等离子显示屏系统] +[http://www.3333888888.com/dzdg003/356.htm 等离子显示器] +[http://www.3333888888.com/dzdg003/357.htm 等效防腐防雷] +[http://www.3333888888.com/dzdg003/358.htm 低功耗充台] +[http://www.3333888888.com/dzdg003/359.htm 低汞电池] +[http://www.3333888888.com/dzdg003/360.htm 低温瓷] +[http://www.3333888888.com/dzdg003/361.htm 低温辐射电热膜供暖系统] +[http://www.3333888888.com/dzdg003/362.htm 低温辐射膜] +[http://www.3333888888.com/dzdg003/363.htm 低温贮槽] +[http://www.3333888888.com/dzdg003/364.htm 低压变频器] +[http://www.3333888888.com/dzdg003/365.htm 低压差大电流直流稳压模块] +[http://www.3333888888.com/dzdg003/366.htm 低压成套设备] +[http://www.3333888888.com/dzdg003/367.htm 低压成套装置] +[http://www.3333888888.com/dzdg003/368.htm 低压电缆] +[http://www.3333888888.com/dzdg003/369.htm 低压电力系统防雷] +[http://www.3333888888.com/dzdg003/370.htm 低压电气] +[http://www.3333888888.com/dzdg003/371.htm 低压电气成套设备] +[http://www.3333888888.com/dzdg003/372.htm 低压电气配电箱] +[http://www.3333888888.com/dzdg003/373.htm 低压电器] +[http://www.3333888888.com/dzdg003/374.htm 低压电器触头] +[http://www.3333888888.com/dzdg003/375.htm 低压电器控制柜] +[http://www.3333888888.com/dzdg003/376.htm 低压电器铆钉] +[http://www.3333888888.com/dzdg003/377.htm 低压电器元件] +[http://www.3333888888.com/dzdg003/378.htm 低压电源避雷器] +[http://www.3333888888.com/dzdg003/379.htm 低压断路器] +[http://www.3333888888.com/dzdg003/380.htm 低压防爆电机] +[http://www.3333888888.com/dzdg003/381.htm 低压柜] +[http://www.3333888888.com/dzdg003/382.htm 低压交联电缆] +[http://www.3333888888.com/dzdg003/383.htm 低压开关成套设备] +[http://www.3333888888.com/dzdg003/384.htm 低压开关柜] +[http://www.3333888888.com/dzdg003/385.htm 低压开关箱] +[http://www.3333888888.com/dzdg003/386.htm 低压缆] +[http://www.3333888888.com/dzdg003/387.htm 低压母线槽] +[http://www.3333888888.com/dzdg003/388.htm 低压内外线] +[http://www.3333888888.com/dzdg003/389.htm 低压配电柜] +[http://www.3333888888.com/dzdg003/390.htm 低压配电柜体] +[http://www.3333888888.com/dzdg003/391.htm 低压用户] +[http://www.3333888888.com/dzdg003/392.htm 低压载波抄表系统] +[http://www.3333888888.com/dzdg003/393.htm 低压载波居民抄表系统] +[http://www.3333888888.com/dzdg003/394.htm 低压组合式开关柜] +[http://www.3333888888.com/dzdg003/395.htm 低烟无卤] +[http://www.3333888888.com/dzdg003/396.htm 低烟无卤电缆] +[http://www.3333888888.com/dzdg003/397.htm 低烟无卤阻燃电缆] +[http://www.3333888888.com/dzdg003/398.htm 低中高压陶瓷电容器] +[http://www.3333888888.com/dzdg003/399.htm 低中压交联电缆] +[http://www.3333888888.com/dzdg003/400.htm 镝灯] +[http://www.3333888888.com/dzdg003/401.htm 迪斯科舞厅用灯具] +[http://www.3333888888.com/dzdg003/402.htm 地板插座] +[http://www.3333888888.com/dzdg003/403.htm 地插灯] |
From: <fre...@km...> - 2004-12-31 10:57:36
|
Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification. The following page has been changed by 194.7.114.130: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fSupportedHardware The comment on the change is: Moved some info to the new wiki ------------------------------------------------------------------------------ @@ -31,24 +31,9 @@ == TV Capture Cards == -Any video card that supports the * [http://bytesex.org/bttv/ v4l] or [http://bytesex.org/bttv/ v4l2] API. Should be possible to use under Linux. However, -If you are looking into new hardware, some models are highlighted. - - === Cards using the BTTV kernel module === -According to http://bytesex.org/bttv/ bttv is linux driver for TV cards based on the bt848 and bt878 chips. - -see the BttvPage for module setup. This page also contains a listing of cards supported by the BTTV driver. - -=== Hauppauge WinTV Cards === - -Many people have reported good performance and strong driver support for the Hauppauge WinTV series -of cards. They have a large number of cards, but only the WinTV PCI cards using analog reception -will be of much use. -Warning: if you're considering to buy a Hauppauge WinTV card check the chipset on the card before buying. Hauppauge has changed the chipset on some cards without any mention. -For example the older version of the WinTV PCI Radio (401) has bt878 chip which is well supported by BTTV, but a newer revision contains the CX881 chip which currently -(2003-07-08) is not supported. +Moved to the new wiki : http://freevo.sourceforge.net/cgi-bin/doc/Hardware/bttv === Hauppauge WinTV-PVR Cards === @@ -70,35 +55,12 @@ ==== Freevo setup for IVTV ==== -In order to record using the PVR-250/350 cards with Freevo please read the IVTV section in RecordingInfo, too. - -In order to watch live TV with a PVR-250/350, the following 2 lines are needed in local_conf.py with older Freevo versions: -{{{plugin.remove('tv.mplayer') -plugin.activate('tv.ivtv_basic_tv')}}} - -With (at least) 1.50-rc1 the above is no longer true, however the following VIDEO_GROUP setting is now necessary (again, see RecordingInfo): -{{{VIDEO_GROUPS = [ - VideoGroup(vdev="/dev/video0", - adev=None, - input_type='tuner', - input_num=4, - tuner_norm=CONF.tv, - tuner_chanlist=CONF.chanlist, - desc='Cable', - group_type="ivtv", - recordable=True), - ]}}} +Moved to the new wiki : http://freevo.sourceforge.net/cgi-bin/doc/AnalogTvConfig ==== TV-Out ==== If you want Freevo to use the WinTV PVR card's TV-out, you can use the TV-out as a standard framebuffer device for X. Once you get X working with this framebuffer device freevo works with it just like any other X display. This is explained in the [http://ivtv.writeme.ch/tiki-index.php?page=TvOutHowto TvOutHowto page of the IVTV Wiki]. -==== Misc. Information ==== - -The WinTV-PVR card appears to possibly have some minimal support in the recent BTTV 0.9.x drivers. It appears the BTTV author ported some of the old code from the http://pvr.sourceforge.net project. According to the latter site, this would allow to use standard V4L TV software (xawtv, tvtime, ...). Please add information to this wiki page if you know more about this. - -Otherwise, the current status is that the card will '''not''' deliver the right output on `/dev/video0` for those TV applications to work. Depending on your settings (this can be changed via ioctl's, see the test_ioctl utility from the IVTV driver), `/dev/video0` will probably already give an MPEG2 stream that can be played with Mplayer for example ("`mplayer -v - < /dev/video0`", more sophisticated commands are used by Freevo). Freevo has IVTV driver support, that is, it will issue the right IOCTL commands to set up your card, change the channels and so on. (See the example local_config.py; the output of test_ioctl will help a lot in choosing the right parameters.) - === ATI All-in-Wonder Models === Check out [http://gatos.sourceforge.net the Gatos website] for information on the All-in-Wonder cards. They have incredible support for even the really really old All-in-Wonder cards. NOTE: ALL of the All-in-Wonder cards, even the original 4MB one will give DVD hardware acceleration if you use the Gatos drivers. It's worth the effort if you have one of the oldies. |