[Flightgear-devel] Weekly CVS Changelog Summary: FlightGear data

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-04_04:26:44 (sydadams)
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/dhc2-sound.xml
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/dhc2F.xml
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/Instruments/asi.xml
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/Instruments/fuel-gauge.xml
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/Instruments/oiltemp-gauge.xml
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/Instruments/vacuum.xml
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/Instruments/vsi-gauge.xml
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/Models/dhc2W.ac

more float adjustments...
updated sounds and wake animation...

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-04_04:26:45 (sydadams)
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/Models/submodels.xml
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/Models/wake.ac
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/Models/wake.xml
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/Nasal/dhc2.nas

more float adjustments...
updated sounds and wake animation...

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-04_06:55:28 (mfranz)
/var/cvs/FlightGear-0.9/data/Aircraft/Instruments/KAP140TwoAxis.xml

Dave Perry & Roy Vegard Ovesen:

"This patch allows all the AC using the kap140 to use one kap140.nas
which includes Roy's move to "bool" values as well as the check for
power used by the pa24-250." (dp)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-04_06:55:29 (mfranz)
/var/cvs/FlightGear-0.9/data/Aircraft/Generic/kap140.nas
/var/cvs/FlightGear-0.9/data/Aircraft/Generic/limits.nas
/var/cvs/FlightGear-0.9/data/Aircraft/Instruments/KAP140TwoAxisAlt.xml
/var/cvs/FlightGear-0.9/data/Aircraft/Instruments/fuel-c172s.xml
/var/cvs/FlightGear-0.9/data/Aircraft/c172/c172-electrical.nas
/var/cvs/FlightGear-0.9/data/Aircraft/c172p/c172p-set.xml
/var/cvs/FlightGear-0.9/data/Aircraft/c172p/Attic/kap140.nas
/var/cvs/FlightGear-0.9/data/Aircraft/c182/c182-set.xml
/var/cvs/FlightGear-0.9/data/Aircraft/c182/Attic/kap140.nas
/var/cvs/FlightGear-0.9/data/Aircraft/c182/Systems/KAP140.xml
/var/cvs/FlightGear-0.9/data/Aircraft/c182rg/c182rg-set.xml
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/Attic/kap140.nas
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/pa24-250-set.xml
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/pa24-electrical.nas

Dave Perry & Roy Vegard Ovesen:

"This patch allows all the AC using the kap140 to use one kap140.nas
which includes Roy's move to "bool" values as well as the check for
power used by the pa24-250." (dp)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-04_06:55:30 (mfranz)
/var/cvs/FlightGear-0.9/data/Aircraft/c172p/Systems/KAP140.xml

Dave Perry & Roy Vegard Ovesen:

"This patch allows all the AC using the kap140 to use one kap140.nas
which includes Roy's move to "bool" values as well as the check for
power used by the pa24-250." (dp)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-04_07:30:10 (martin)
/var/cvs/FlightGear-0.9/data/Aircraft/Instruments-3d/kt70/kt70.xml

Ron Jensen:

Add panel lighting effects to transponder.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-04_07:32:17 (martin)
/var/cvs/FlightGear-0.9/data/Aircraft/c182/c182-set.xml
/var/cvs/FlightGear-0.9/data/Aircraft/c182rg/c182rg-set.xml

Ron Jensen:

Make the night lighting wrap at 1.0 instead of 0.75.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-04_12:06:02 (sydadams)
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/Nasal/dhc2.nas

fixed some nasal bugs...

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-04_14:18:31 (mfranz)
/var/cvs/FlightGear-0.9/data/Aircraft/a4/Models/a4.nas

use function object in setlistener(), not a function call

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-04_14:20:45 (mfranz)
/var/cvs/FlightGear-0.9/data/Aircraft/Generic/aar.nas

- reset engines' consumed fuel
- change variable name

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-04_16:09:43 (mfranz)
/var/cvs/FlightGear-0.9/data/Aircraft/Generic/aar.nas

- work around broken props.Node.getBoolValue()
- simplification & cleanup

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-04_23:51:48 (sydadams)
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/dhc2-sound.xml
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/dhc2F.xml
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/Models/submodels.xml
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/Models/wake.xml
/var/cvs/FlightGear-0.9/data/Aircraft/dhc2/Nasal/dhc2.nas

Updated float water - handling , more realistic now but haven't solved the sideways drift yet....
Updated sounds but click sound is gone in OSG version...
Added Melchoir's crash handler to test beaching crash ...

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-05_05:27:57 (mfranz)
/var/cvs/FlightGear-0.9/data/Aircraft/bo105/bo105.xml
/var/cvs/FlightGear-0.9/data/Aircraft/bo105/Models/bo105.nas

fix wow node

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-05_05:40:49 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/props.nas

getBoolValue() on an undefined node shall return "false", not "true".
This isn't only more logical, it's also how SGPropertyNode::getBoolValue()
acts. The fix has potential to break code, but so far I haven't seen any
problems. I added a debug message to my copy and will for a while check
all cases that I run into. To check yourself, just add one line:

    getBoolValue : func {
        val = me.getValue();
+       if(val == nil) { debug.dump(me) }
        if(me.getType() == "STRING" and val == "false") { 0 }
        else { val != nil and val != 0 }
    }

This will output a debug message to the terminal for each case where
formerly "true" was returned, and now "false" is.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-05_10:14:51 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/dynamic_view.nas

disable dynamic view in mouse arrow mode. Operating all the tiny switches
on 3d panels while hopping over bumpy terrain has become difficult -- much
harder than in real life. I'm open for better solutions. Just complain. :-)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-05_14:36:29 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/dynamic_view.nas

don't generally freeze dynamic_view in arrow mouse mode, but only a short
time after mouse movements or clicks. After that period a rather ugly jump
happens. TODO: make this smoother

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-05_14:57:19 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/dynamic_view.nas

oh, and freeze while a button is pressed in arrow mode ...

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-05_16:59:51 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/dynamic_view.nas

don't waste time when we aren't in dyn-view mode at all

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-05_18:02:03 (mfranz)
/var/cvs/FlightGear-0.9/data/Aircraft/bo105/Models/bo105.nas

account for lower friction values on grass in material.xml

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-05_20:30:39 (sydadams)
/var/cvs/FlightGear-0.9/data/Aircraft/A6M2/A6M2-set.xml
/var/cvs/FlightGear-0.9/data/Aircraft/A6M2/A6M2b-set.xml
/var/cvs/FlightGear-0.9/data/Aircraft/A6M2/a6m2b.xml
/var/cvs/FlightGear-0.9/data/Aircraft/A6M2/splash.rgb

New splash screens and nasal fixes from Tat....
Set carrier hook angle lower ....
Added rear gear and yoke animations missing in green version...

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-05_20:30:40 (sydadams)
/var/cvs/FlightGear-0.9/data/Aircraft/A6M2/splash1.rgb
/var/cvs/FlightGear-0.9/data/Aircraft/A6M2/Models/a6m2-anim.xml
/var/cvs/FlightGear-0.9/data/Aircraft/A6M2/Models/a6m2b-green.xml
/var/cvs/FlightGear-0.9/data/Aircraft/A6M2/Nasal/a6m2.nas
/var/cvs/FlightGear-0.9/data/Aircraft/A6M2/Nasal/jwarbirds.nas

New splash screens and nasal fixes from Tat....
Set carrier hook angle lower ....
Added rear gear and yoke animations missing in green version...

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-06_08:33:59 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/dynamic_view.nas

- fix reinit/reset (has this caused the spinning view on reset for some?)
- add var to module functions to avoid conflicts with module names

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-06_10:20:39 (mfranz)
/var/cvs/FlightGear-0.9/data/Aircraft/bo105/Models/bo105.nas

- set "lookat" roll
- add var to module functions to avoid name collisions with module names

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-06_10:25:44 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/dynamic_view.nas

interpolate between frozen or lookat direction and current view direction

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-06_13:57:57 (curt)
/var/cvs/FlightGear-0.9/data/Aircraft/bf109/Attic/bf109-set.xml
/var/cvs/FlightGear-0.9/data/Aircraft/bf109/bf109-splash.rgb

Detlef Faber:

here are some updates for the bf109. Adaptions to the new ground
properties, a smaller splashscreen, removed the n/N key binding and
global Material animation.

The .tgz contains the altered files.

Please remove the files:

bf109.xml
bf109-set.xml
Models/bf109.xml

They are not needed anymore.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-06_13:57:58 (curt)
/var/cvs/FlightGear-0.9/data/Aircraft/bf109/Attic/bf109.xml
/var/cvs/FlightGear-0.9/data/Aircraft/bf109/bf109g-set.xml
/var/cvs/FlightGear-0.9/data/Aircraft/bf109/bf109g-yasim.xml
/var/cvs/FlightGear-0.9/data/Aircraft/bf109/Models/Attic/bf109.xml
/var/cvs/FlightGear-0.9/data/Aircraft/bf109/Models/bf109g-model.xml

Detlef Faber:

here are some updates for the bf109. Adaptions to the new ground
properties, a smaller splashscreen, removed the n/N key binding and
global Material animation.

The .tgz contains the altered files.

Please remove the files:

bf109.xml
bf109-set.xml
Models/bf109.xml

They are not needed anymore.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-06_16:57:06 (martin)
/var/cvs/FlightGear-0.9/data/Aircraft/c182rg/Models/c182-01.rgb
/var/cvs/FlightGear-0.9/data/Aircraft/c182rg/Models/c182rg-dpm.xml
/var/cvs/FlightGear-0.9/data/Aircraft/c182rg/Models/c182rg.ac

Stuart Buchanan:

I've been spending a bit of time updating the c182rg model.

Improvements:
- More accurate dimensions, windows
- Proper wheel wells for the rear gear
- Modelled fuel caps, vents, beacons
- Improved textures and texture mapping.

There are still a number of problems
- Transparency issues with the windshield - wing/fuselage disappears when
seen through two surfaces.
- The interior doesn't match up perfectly with the outside fuselage.

Martin Spott:

Remove DOS line breaks.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-06_18:28:48 (mfranz)
/var/cvs/FlightGear-0.9/data/Docs/keyboard/map.pdf
/var/cvs/FlightGear-0.9/data/Docs/keyboard/map.tex

keymap update: only the f4u is left as overriding the n/N keys. Yay!

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-07_10:54:22 (mfranz)
/var/cvs/FlightGear-0.9/data/Aircraft/bo105/Models/bo105.nas

adjust lookat view dir (bound to flaps-up key/js-button)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-07_10:58:46 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/dynamic_view.nas

make lookat work correctly for when the user changed view direction;
Remember: dynamic_view.lookat(heading, pitch, roll) moves view
smoothly to this direction, while dynamic_view.lookat() moves it back.
This can be used for quick view changes to the panel etc. It's currently
only used in the bo105 (flaps-up binding).

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-07_11:06:05 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/debug.nas

- add debug.local([<frame>]) to output local variables of frame #0
  or of given frame
- add debug.string(<variable>). This returns the variable dump as
  string.
- add var to module function variables to avoid collisions with module names

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-07_11:06:52 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/aircraft.nas

minor documentation fix

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-07_11:23:41 (mfranz)
/var/cvs/FlightGear-0.9/data/Aircraft/seahawk/Models/seahawk.nas

remove old view_manager; This is now done via global dynamic_view.
(OK'ed by Vivian)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-07_11:31:41 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/props.nas

work around Nasal bug (and/or operators)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-07_16:13:51 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/dynamic_view.nas

add support for x/y/z axes. The built-in function is (still) a NOOP, but
aircraft can plug a custom function. This function can access all internal
variables of the ViewManager class. It can set me.{x,y,z}_offset, and also
add offsets to me.{heading,pitch,roll}_offset. Example:

dynamic_view.register_headshake(func {
        me.x_offset = rand() * 0.02;  # Parkinson effect
});

The advantage of this implementation is that it doesn't break MMB drag
functionality, and that is can be frozen by mouse movements.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-08_00:56:19 (martin)
/var/cvs/FlightGear-0.9/data/Input/Joysticks/Logitech/dual-action.xml

Sava? Yatmaz:

Logitech Dual-action gamepad driver.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-08_12:42:02 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/aircraft.nas

- move all module initialization code into one-shot listener
- initialize /sim/time/delta-realtime-sec, so that the lowpass filter doesn't
  complain if it's starter eraly (of course the results won't be correct
  until the delta is real)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-08_16:16:10 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/dynamic_view.nas

- extend lookat() function:  dynamic_view.lookat(hdg, pitch, roll, x, y, z [, fov])
- use extra function for resuming normal mode after lookat: dynamic_view.resume()
- add fov (field-of-view) to interface:  me.fov_offset
- remove register_headshake and me.headshake; this can still be done via
  normal register(). If only headshaking is to be added, while keeping default
  plane view, do this:

  dynamic_view.register(func {
      default_plane();
      me.x_offset = ...
      me.y_offset = ...
      me.z_offset = ...
  });

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-08_16:16:35 (mfranz)
/var/cvs/FlightGear-0.9/data/Aircraft/bo105/Models/bo105.nas

adapt for dynamic_view interface changes

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-09_07:31:04 (mfranz)
/var/cvs/FlightGear-0.9/data/mice.xml

In mouse view mode <=> one could already move the view left/right/up/down
when dragging the mouse with middle mouse button (MMB) pressed (reset
with MMB+LMB):

Add support for forward/backward moving (MMB+KbdCtrl). With this one can,
for example, read what's written on the backside of the cup of coffee
on top of the screen in the E3B's operator room, or walk around between
the passenger seats in the fokker70 searching for the toilet.  :-)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-09_12:10:22 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/dynamic_view.nas

small fix; need to remove the whole silly wrapper, anyway

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-10_14:42:36 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/dynamic_view.nas

prevent math.ln(0)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-10_14:45:50 (mfranz)
/var/cvs/FlightGear-0.9/data/Aircraft/bo105/Models/bo105.nas

- simplify dynamic_view recipe
- make flaps-up button toggle view on short press, and switch back on
  release on longer press
- don't reset dynamic_view, it does it on its own anyway

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-10_15:16:20 (martin)
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/Models/radio_stack/Attic/RadioStack.ac
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/Models/radio_stack/Attic/panel-tex02.rgb
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/Models/radio_stack/Attic/radio-stack.xml

Dave Perry:

Changes:
1.  remove typo from all the /Systems/KAP140.xml files
2.  changes to put radio_stack in Instruments-3d
3.  Add "pick" to vor, alt, hi, in Instruments-3d
4.  changes to pa24-250 and pa28-161 to use 2 and 3.
5.  add "pick" and "2d text in window" in 3d OAT in pa24-250

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-10_15:24:46 (martin)
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/Models/oat/OAT_base.rgb
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/Models/oat/OAT_win_base.rgb

Dave Perry:

Changes:
1.  remove typo from all the /Systems/KAP140.xml files
2.  changes to put radio_stack in Instruments-3d
3.  Add "pick" to vor, alt, hi, in Instruments-3d
4.  changes to pa24-250 and pa28-161 to use 2 and 3.
5.  add "pick" and "2d text in window" in 3d OAT in pa24-250

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-10_15:30:36 (martin)
/var/cvs/FlightGear-0.9/data/Aircraft/Instruments-3d/alt/alt.ac
/var/cvs/FlightGear-0.9/data/Aircraft/Instruments-3d/alt/alt.xml
/var/cvs/FlightGear-0.9/data/Aircraft/Instruments-3d/hi/hi.ac
/var/cvs/FlightGear-0.9/data/Aircraft/Instruments-3d/hi/hi.xml

Dave Perry:

Changes:
1.  remove typo from all the /Systems/KAP140.xml files
2.  changes to put radio_stack in Instruments-3d
3.  Add "pick" to vor, alt, hi, in Instruments-3d
4.  changes to pa24-250 and pa28-161 to use 2 and 3.
5.  add "pick" and "2d text in window" in 3d OAT in pa24-250

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-10_15:30:37 (martin)
/var/cvs/FlightGear-0.9/data/Aircraft/Instruments-3d/vor/vor.ac
/var/cvs/FlightGear-0.9/data/Aircraft/Instruments-3d/vor/vor.xml
/var/cvs/FlightGear-0.9/data/Aircraft/Instruments-3d/vor/vor2.xml
/var/cvs/FlightGear-0.9/data/Aircraft/c172p/Systems/KAP140.xml
/var/cvs/FlightGear-0.9/data/Aircraft/c182/Systems/KAP140.xml
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/pa24-250-set.xml
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/pa24-250-sound.xml
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/Models/pa24-250.xml
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/Models/pa24.nas
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/Models/oat/OAT.ac
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/Models/oat/oat.xml
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/Models/oat/oat_3d.xml
/var/cvs/FlightGear-0.9/data/Aircraft/pa24-250/Panel/pa24-panel.xml

Dave Perry:

Changes:
1.  remove typo from all the /Systems/KAP140.xml files
2.  changes to put radio_stack in Instruments-3d
3.  Add "pick" to vor, alt, hi, in Instruments-3d
4.  changes to pa24-250 and pa28-161 to use 2 and 3.
5.  add "pick" and "2d text in window" in 3d OAT in pa24-250

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-10_17:47:02 (mfranz)
/var/cvs/FlightGear-0.9/data/Nasal/dynamic_view.nas

- add some documentation
- reset values

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2007-02-10_17:50:41 (mfranz)
/var/cvs/FlightGear-0.9/data/gui/menubar.xml

allow to open several property browsers via menu

2f585eeea02e2c79d7b1d8c4963bae2d

[Flightgear-devel] Weekly CVS Changelog Summary: FlightGear data

FlightGear Flight Simulator: free open-source multiplatform flight sim

[Flightgear-devel] Weekly CVS Changelog Summary: FlightGear data