FlightGear - Flight Simulator FGAddon

Lockheed1049h: delete some unused Nasal files.

Lockheed1049h version 2.5.2: Implement RMI needles using property rules

The existing implementation used Nasal scripting to overcome an
issue with the in-range flag which was fixed by commit 56912c17
in Oct 2011.

Filtering in a property rule creates a smoother animation of the
RMI needle when switching stations, during station passage and
when the signal is poor.

Patch from Richard Senior.

JA37: Version 3.021
GUI: Added turn rate to performance monitor.
GUI: Added turn radius to performance monitor.
Sim: Changed structural limit warning to 7 G and -2.66 G. Pilots would normally be operating within this limit.
Sim: Changed structural break limit for wings to 12 G at 33477.19 pounds (normal start weight).
GUI: Added sink rate to monitor.
Aero: Increased rear gears rebound value, to let it better cope with touchdown at 5 m/s sink rate.
Aero: Added stall hysteresis for good measure.
Aero: Decreased initial fuel temperature from 70 to 59 fahrenheit.
Aero: Adjusted wave drag to counter the increased drag from drop tank to reachieve max performance values.
Aero: Lowered static friction on rear gears to help with crosswind landings. Increased front gear friction in turn.
GUI: Added colors to different sections of performance monitor.
Aero: Adjusted the steering limit in regard to ground speed for the new friction values. It now steer significant less.
Model: Added Flightgear livery.
HUD: Set default brightness to brightest.

Citation II: make the pilot and copilot seat armrests move smoothly.

Fix a texture path, thanks to Edward d'Auvergne

ZivkoEdge: reflect new http paths

SenecaII: reflect new http paths

Removal of the unused svn:mime-type subversion property from all of FGAddon.

This follows from the proposal for deleting the property for all XML files at
http://thread.gmane.org/gmane.games.flightgear.devel/77365 and the discussions
in the thread at http://thread.gmane.org/gmane.games.flightgear.devel/77606 (for
setting up a repository pre-commit hook script for catching this unused
property) where deleting the property for all files was discussed.

This svn:mime-type repository property is only for optimising the back-end
storage size of the db/revs/* files on the SourceForge infrastructure, by
allowing certain text files with a very limited number of extremely long lines
to be treated as a binary rather than a text file, hence suppressing diffs in
the commit. As no one has deliberately set this and many text files in FGAddon
are accidentally not being treated as text, this change will result in a major
repository clean up which will allow all text files to be treated as text. The
activation of the pre-commit hook will prevent this problem from ever
reappearing.

This change touches the files in 480 aircraft directories out of 485, however
this does not affect the file contents or aircraft in any way.

Citation II:

* added aft baggage door with animation
* added aft baggage compartment

A few more texture and mesh improvements.