Changes:
---------------
MCDU: correct for transition addition
Wing condensation at higher aoa, bugfixes
Allow clearing of route in INITA
Merge pull request #148 from Kasluk24/fo-audio-control
Added functionality to FO's ACP
EFIS: move out of libraries. namespace
VAPP input range
Flightplan: show PPOS --> discont if before INITA
Added functionality to FO's ACP
Merge branch 'dev' of https://github.com/legoboyvdlp/A320-family into dev
It didn't
It works
Improvements
Add PILOT WAYPOINT page
Merge branch 'dev' into waypoints-database
Persistent across sessions
Database persistent across sessions
Arrows for VERTREV's CLB/DES should be amber.
Add comments about VERTREV for when vertical planning is implemented.
Change RETURN back to CLB/DES on VERTREV page type 3.
Fix typo which prevent RSK6 returning from the VERTREV page.
Vertical revision bogus CLB/DES and R6 arrow.
Update install.md to new link
Saving works now!
Fix closest airports magVar; fix the database adding to first wp
A/C STATUS page works; deleting works; it won't yet add at the first index (it _does_ add the waypoint to db but doesn't add to the flightplan :(
Flightplan: rewrite inserting algorithim
Add ability to re-add stored waypoints. Prepare ability to store waypoints
WP Database: add initial; limits entries to 20
Very minor change to navdisplay - make sure it always inherits from correct parent class
Nasal - correct namespace definitions
Typo - why didn't it trigger an error message?!
Correct ATC knob; correct startup sound (so it doesn't reset)
Fix ATC mode knob
Proof of concept for using nodes rather than property IO in FMGC; also re-add forward slash in various places, and correct format of transition altitude on PERF APPR page
Add dmeIntercept waypoints to no-sequence list
Bugfixes to FMGC phase reset / scratchpad messages
Fix flightplan sequencing
Minor change to flightplan code
Enable AIRPORT key (doesn't work quite to spec but at least works); improve code for button handling
Use 2019.2+ customisation for tcas since 2020.1 is out now
Correct distance calculations in DIRTO page
Autopush now moves the nose wheel at 75 deg/s; nose wheel remains at 12 deg/s per manual
Re-add discontinuities experimentally
DIRTO page: bugfix
Sorry - I forgot to add my last bugfixes last night!
FPLN: Missed approach shown in blue (green in go-around); L6 now shows runway code. R1 shows departure elevation and V1 speed. General formatting and spacing improved. Track now displayed on the first missed approach waypoint
Add Place / Bearing / Distance - uses magnetic heading for now
BugFix - Fuel temp is odd #128
Navdisplay: enable PLAN scrolling; correct scrolling on F-PLN page in MCDU; remove legacy files from navdisplay; correct bug in waypoint displaying where waypoints wouldn't be deleted
Approaches can be slewed if there are exactly four.
Fix to #139
Correct GPWS landing flaps
Update readme per Charlie_X request
Merge branch 'dev' of https://github.com/legoboyvdlp/A320-family into dev
Gear sound volume.
DU: Fix clipping problems on the PFD
Irradiance on captain's sliding window
What maniac used spaces :)
Control: Totally refactor Flaps/Slats system, add more detail
Fix off by one error in arrivals selection.
Update leading zeros on perf appr
Cockpit sounds not played outside
Whitespace
Cleanup -set .xmls; Model/X.xmls, checklists, add generic checklist marker
Displays: fix effect (remove weird shadows that sometimes happen)
Fixes for CFM (EGT wouldn't show up sometimes at idle) FADEC and sounds
CFM56: fix, slightly. Pushback sound fixed.
Correct aoa floating point error
Irradiance improvements (#134)
* Add cockpit cubemaps; turn off irradiance effect, boost amb to maximum
* Revert ambient change
* Revert the revert
* Re-organize irradiance effect, add FCU
* Disabling cockpit shadows again... but irradiance has been improved
Fix radio panels inverted y-axis
Correct transponder code position
Merge branch 'dev' of https://github.com/legoboyvdlp/A320-family into dev
Move canvas displays to absolute positions
Merge pull request #132 from Kasluk24/default_view
Option for First Officer as default view
Renamed the Pilot Flying view option / added in the help
Corrected formatting
Move Pedestal_up to flightdeck.ac
Default view First Officer option 2
Remove character?
3D: remove offsets on audio / radio panels; and move DDRMI / brakes to main flightdeck.ac
Bugfix
Neo startup sounds
CFM56 startup sounds
Minor thing that doesn't change anything
Fix pushback sound
Default view First Officer option
Update acconfig.nas
Update acconfig.nas
Update acconfig.nas
Update acconfig.nas
FO default view option
Port J-Maverick 16's sound work
CLOSEST AIRPORT page functioning, and AIRWAYS page slight improvements. Will make functional sometime later.
Hold dummy page improved, airways dummy page added
Merge branch 'dev' into flightplan-load
Rewrite and cleanup legacy code somewhat
Shake effect: optimize legacy code
Make the batteries drain when static inverter is active
New battery charging logic
FMGC: Improve LOC and Rollout Aileron
Fix gross weight bug
Bugfix SD Wheel page, correct rate of NWS actuator, and add tire pressure to .svg (not yet implemented)
3D: remove doubled vertices; smooth shading
Updates to IRS INIT page
Bugfix lights; ALIGN --> OFF
Revision
Correct ADR knobs
Bugfix ECAM
Re-add leading slash on ADR code; props.nas
Remove deprecated file, rename class
Revert "Update INIT format, remove ground temp"
This reverts commit e41c786247bbea2aa1a9d75f601485eeb6dc2ead.
Update INIT format, remove ground temp
Fix blurriness in chrono clock
Rename :)
Improve latitude / longitude entry
Remove duplicated object on overhead panel
Turn the volume down a little!
Revise PTU inhibition on ground
Rename
Add initial load flightplan support
Remove debug output in ND
Fix PFD typo, correct bearing could go below zero or above 360
Add bearing / track / distance along flightplan. It doesn't play nicely with (alt) waypoints
Fixes for arrival / departure page so they now show selected departure / approach properly at the top
Sim: Refactor ND EFIS interface, Altimeter STD, and fix some bugs
Sim: Fix mistake
Sim: Various cleanup and optimization
Pedestal floodlight - remove bugs on lower pedestal, also remove alpha channel of pedestal_low.png to improve readability of labels
Remove un-used ATC model, merge with pedestal_up
Remove OHpanel.new
Improve light switches, fix EVAC panel, and remove doubled-vertices on fire pushbuttons
Add comment on altitude for the future
Fix PERFAPPR runway issue, cleanup code more
Clean up ils logic
3D: Correct normals and smooth shading on flightdeck
Remove harmless error
Bugfix: this is confusing, as you can't actually select the SIDS
Document some functions in flight plan controller, also revise direct to logic a little
Hide baro/radio under 250nm
fix ddrmi dme's osgtext alignement/position
Bugfix - Brakes overheat on replay #115
Clock backlight fix, ddrmi dme's fix, rudder trim indicating 0 fix
Bump minimum version
Fix PTU sound
Enable PTU sound, improvements to PERF TO (thr red / thr acc now allow entry from 400 feet, uplink to data hidden except in phase 0 / phase 7, v1 / vr / v2 input disallowed during takeoff)
Fix phases correctly this time
Add debug statements, fix bounced landing breaking FMGC phases
Typo
Correct references on HOLD page
LATREV: pass the ghost, not identifier. Fix the L6 LAT REV spawn on f-pln page. Change (1500) to 1500 -- we need to remove parenthases on the SID waypoints too, but how?
Bugfix NO STAR and transitions, add NO SID
Add NO STAR choice, makes dynamic waypoint five miles from runway if NO STAR and NO IAP
Bugfix...
FMGC: Fix waypoint advance/sequencing logic for INTC, VECTORS etc
Minor changes to VERTREV page, enable VERTREV on departure airport, STEP CLB only available in climb phases with cruise flightlevel inserted
Remove debug statement. Leave other two for investigating potential bugs with excess motion in future
Fix deprecated printlog warning
Signed-off-by: fly <merspieler@...>
Show 7.5 on the outer circle on the ND when at 10nm and in ARC mode
Signed-off-by: fly <merspieler@...>
Merge branch 'comm' into dev
Sim: Fix broken keyboard MCDU input with CTRL+K
Port to RMP 2 / ACP 2
Electrical supply
Bugfix, add to ECAM
HF radios interfaced
Merge branch 'dev' into comm
Bugfix adr - thanks marvin again!
Connect to RMP
Merge branch 'dev' into comm
Remove duplicated addition - thanks marvin!
Merge branch 'dev' into comm
HF simulation: add class, static noises, and tuning. Interface with RMP
FMGC: Fix autopilot ignoring altitude target in G/A SRS mode
FMGC: Fix DH/MDA system and make sounds work properly and fix overlap
Fix on PFD display
Correct minimum/hundred-above callout
Push non-working correction
Fix minor fuel bug
Update PERF pages to newer format
Re-enable radio/baro clear, new INIT-A page, fix CLR nasal errors
Minimum VLS correction
Fix prog symols on fpln page, update pfd svg to newer format
Bugfix vertical plan phases
Fix pfd2
Disable buggy clearing for baro/radio
Fix dirto, correct baro display
Bugfix: cruise-fl is in flight levels, not feet
Correct loop bug
Correction to conditions - I think this is right, please inform me if not
Correct namespace reference
Update minimum/100 above sounds, implement altitude bars/ground reference
Proper mda/dh implementation
Partial DH/MDA implementation on PFD
Add baro/radio, improve vapp
Implement generic mcdu message, add ils mismatch (need to fix offset freq error, i.e. KSFO 28R)
Big fuel bug fixes, minor ILS fix
Implement aligning to aligned message
Implement fully functional IRSINIT page
Bugfix
Bugfix FMGC
Move PFD logic away from phase 7
Implement partial ILS select functionality
Add experimental vertical flightplan phases, allow user to set cruise flight level in descent phase
Rename property to make it more clear what this does
Fix digit display errors on PERF
Correct value ranges on PERFAPPR
Clean-up PERFTO, fix formatting for entries
Clean-up INITB/FUELPRED, fix formatting for entries
Clean-up INITA, fix formatting for entries
Keep align button after align
Correct GPS format
Disable route selection
Add runways to PERF
Sim: Add toggle keyboard buttons to MCDU dialogs
Keyboard mode - add Ctrl-K toggle
Install APU on non-IAE
Invalid egt (Why would that ever happen) no longer crashes lower ECAM
Mesh: smooth shading on some bits
Correct acconfig so it always works. Nasty. Rework acconfig?
Cleanup mesh - remove doubles
Merge pull request #116 from legoboyvdlp/APU
JSBSim APU
Correct power source for the fire squib indicators
Model: add torch to torch pocket, smooth out sidebase 3D, and minor modifications to add an extra pocket on the captain's side near the tiller.
Really...
Better bugfix
Bugfix Linux segfaults
Minor stuff
Merge branch 'dev' of github.com:legoboyvdlp/A320-family into dev
FMGC: Fix incorrect variable init
Bugfix buttons.nas, fault light operation, cooldown timer works now
Proper integration with fire, ecam, electrical
Added printable checklist
Signed-off-by: fly <merspieler@...>
FMGC: Fix numerous bugs in the autopilot and heading/track control logic
Major improvements, oil simulated, acconfig, lower ecam, etc
EGT works on shutdown now
No need to fast start all the time, now.
Bugfix
Move to better place
Add click click with ap disc / at disc
Fix Issue #48
Optimize clock code
Rudder trim now on DC2 as well as DC ESS
Correct electrical power source for clock and rudder trim display
Correct the second DME
DME shows zero below one mile
Bugfix ADR
Add power and ADIRS to DDRMI, fix decimal point when > 20 nautical miles
Fix Chrono format
rudder trim display: Fix material animation
Merge branch 'chrono_dme' of https://github.com/legoboyvdlp/A320-family into chrono_dme
Chrono, Clock, ET Chrono, rudder trim indicator improvements
Clock (todo): GPS/INT/SET mode
Add osgtext material animation
Clock/chrono improvements + enabled terrain on ND buttons on flightdeck + typo fix on Radio1.xml and Radio2.xml
fix clock.nas formatting
Clock improvements (hopefully)
Fix DME indicator for range > 20 nm (decimals not displayed)
Chrono bugfix
Revert "Dme bug Fix"
This wasn't a bug... it is correct that indicator's shows information according to FMGC RADNAV page instead of FG default radio panel
This reverts commit 5df743d19918d51cbe4ed72a56e86349705ce8c7.
Dme bug Fix
Chrono cleanup
Revert "chrono + clock + ET + Rudder trim indicator"
This reverts commit de928ac1851e1182446ad944ded4f509f9385d1d.
chrono + clock + ET + Rudder trim indicator
chrono + clock + ET + Rudder trim indicator
Clock 3D upgrade + initial animation and logic
Update DME indicators
Initial commit for Chrono and dme indicators
Link to pinto's navdata, instructions for navdata use
Sim: Give credit to people in readme
GIT: Update 2019 to 2020
Sim: Giving credit to all the wonderful people
FMGC: Fix errenous disarming of NAV mode - and incorrect ingauge condition
Acconfig...
Fix ref to old prop, remove old apu system, acconfig
Fix apu valve weirdness
If you toggle setlistener too fast it don't fire
Proper APU valve display on fuel page
Bugfix pipes
Correction
typo
Separate tank for the APU fuel
Bugfix apu fuel
... but only when the apu lp valve is open
APU pump fills left pipes
Add to all variants, and correct fuel valve
Merge branch 'APU' of https://github.com/legoboyvdlp/A320-family into APU
Proper shutdown speed
JSBSim apu
Update limits to match TDCS
Correct masses for EASA 88 kg passenger and 180Y layout. Livery should be able to modify this I think. I am not sure though.
Correct maximum payload of cargo hold
Never trust wikipedia on thrust ratings - check type certificates!
Proper shutdown speed
JSBSim apu
Reduce default dust level
Signed-off-by: fly <merspieler@...>
Merge pull request #112 from legoboyvdlp/speed-rewrite
Speed rewrite
Restore GPS functionality :)
Fix breaking changes, clean up tabs
Merge branch 'dev' into speed-rewrite
Fix speed labels
Add support for alternate/direct law
Fix bugs with approach, protection bars fully work, go-around still buggy
Added display effect. Need tuening and dynamically changing of the contrast property
Signed-off-by: fly <merspieler@...>
Removed 'Route Manager' from the menu
Signed-off-by: fly <merspieler@...>
Approach bug fixes
Fix TO/LDG MEMO wierdness
Signed-off-by: fly <merspieler@...>
Merge pull request #106 from legoboyvdlp/FMGC
Merge FMGC
Add dummy protection speeds, need to fix bottom bar
Correct the sequencing - deleteWP changes broke it
Merge branch 'dev' into FMGC
formatting
Implement speed pointer during approach/go-around
Fix bug in fuel systems
Implement new speed logic, managed speed at correct values (note, pointer still incorrect on approach)
Disable PROG text entry before INITA completed
Implement semi-working PROG/PERF pages, manual APPR activation, initial go-around logic (speeds still wip)
Add semi-working PERFCLB page + some initial manual APPR logic
Correct arrows on HOLD page
Spacing
Add dummy hold page
Direct to now works for L2 -> L5. Revert to FPLN page after insert.
Fix stupid error
Correct typo
Inhibit spawning arrival / departure with bad LATREV page type
Rename F-PLN-rework --> F-PLN.nas
Direct to now deletes waypoints properly. Doesn't work that well with sid / star waypoints
Merge branch 'dev' into FMGC
Update version in install.md
Keyboard mode now based on dialog visibility, add support for cap-lock/shift, implrment independent MCDU text entry
Slight corrections
DIRTO now works!
Clean-up PROG page, add CRZ functionality
Automatic page progression
Add "dummy" PROG pages, improve route selection page for alternates
Fix non-numeric data entries, add cruise temp support, add dn trim support
Correct the discontinuity routines
DIRTO finalised, now to make it work
Remove duplicate lines
Clean-up entabing for MCDU files
Reset title so perf (& work-in-progress prog) pages don't affect everythign else
Clean-up unused variables
Fix walker and property browser
Implement keyboard mode for MCDU
Implement fully functional IRS align page, add initial route selection page, add lat/long/irs handling to INITA
Implement PERF phase state highlighting
Not supporting accidental temp input yet
Minor typo, fixes APPR page
Fix typos/entabing
New show/hide function for MCDU
Implement alternate airport on INTA
Correct F/S/O speeds, implement functional APPR page, add vls/vapp
Add remaining values to FUELPRED
Make fuel planning button work
Implement functional fuel prediction page (mostly done)
Add working INT-B/FUEL PREDICTION pages, trip-fuel calc incomplete
More improvements
Fix typos
DIRTO improved - added tmpy conflict with dirto error messages
Fix capitalisation
dummy DIRTO page
Fixed rear breakers being not lit by backlight
Signed-off-by: fly <merspieler@...>
Correct bugs in the VERT REV dummy page
Merge branch 'dev' into FMGC
Fix arrival distance calculation
Merge pull request #103 from legoboyvdlp/cleanup
Cleanup
That was too much
Signed-off-by: fly <merspieler@...>
Restored files that broke things
Signed-off-by: fly <merspieler@...>
Merge branch 'dev' into FMGC
Experimental support for cases like EGJJ
Agressive cleanup
Signed-off-by: fly <merspieler@...>
Moved tools.txt into section of README.md
Signed-off-by: fly <merspieler@...>
Removed broken liveries
Signed-off-by: fly <merspieler@...>
FROM legend, now show UTC / altitude of FROM waypoint
Merge branch 'dev' into FMGC
Fixed rounding on refuel panel
Signed-off-by: fly <merspieler@...>
Fixing conversion to lbs
Merge branch 'dev' into FMGC
Merge branch 'dev' of https://github.com/legoboyvdlp/A320-family into dev
Add Atlantic Airways livery
Merge pull request #98 from legoboyvdlp/pfd
Correct v-speed behavior + mcdu changes for pfd
Merge branch 'dev' into FMGC
Add speeds into MCDU, keeping calcs seperate until I have more information about which calcs are transfered to PFD during each phase
Now it works :), create seperate v-speeds template for further APPR editing
Make go around page operable
Add peliminary go around page (inoperable, needs FPLN for alt settings, for now just use init settings)
These all default to 1500, once FPLN is done, can be set to 1500 plus runway altitude
Set managed speed target to v2 after take-off
Correct v-speed behaviour
Merge pull request #97 from legoboyvdlp/pfd
Fix flx formatting, support 0-99 heading entry on ILS CRS
Better fix for FLX, support ils heading entry less than 3 digits
Fix FLX formatting for Mac/Linux systems
Save as well the nd mode model position
Signed-off-by: fly <merspieler@...>
Merge branch 'dev' of https://github.com/legoboyvdlp/A320-family into dev
Potential fix for RAT popping out when it shouldn't
Bugfix - DME backup not lit by dome lt #42
Merge branch 'dev' of https://github.com/legoboyvdlp/A320-family into dev
Bugfix - DME backup not lit by dome lt #42
Bugfix font size / colour
bugfixes
Merge branch 'dev' into FMGC
Fix uninit property, remove un-needed file
Merge pull request #88 from legoboyvdlp/effects
Added wings condensation effect + spray's effects improvements
Stop moisture effect from leaking through the model
Signed-off-by: fly <merspieler@...>
Merge pull request #95 from legoboyvdlp/altitude-alert
Altitude alert
Correct logic of altitude alerter
correct error
Correct altitude to 200 feet (new ICAO regulations mean this is the altitude on newer aircraft, and adjust flashing rate for amber, pending looking for primary sources on youtube
bugfix - removed the 2.5 °C error correction causing the brakes temp to be < TAT
Add proper implementation of altitude alert, works according to spec, pls test
Merge branch 'dev' into altitude-alert
fix IAE engine's moisture position
Merge pull request #91 from Marsdolphin/dev
Fuselage Salvage Control ?!
Revert change to property
Merge branch 'dev' into effects
Merge pull request #94 from colingeniet/dev
Fix gear compression animation over MP
Correct the property for the window icing, adjust the vector for sideways acceleration on the rain, and corrcet the lights view
Semi-working
Fix gear compression animation over MP
Properties gear[i]/compression-ft and gear[i]/compression-norm are
equivalent, but only the latter is transmitted on MP.
Merge pull request #86 from colingeniet/weather-effects
Add weather effects on windshield
Fix error when calling icingInit twice
fix IAE engine's condensation position
Merge branch 'effects' of https://github.com/legoboyvdlp/A320-family into effects
condensation and spray's improvements
Improve rain drops on windshield effect
Icing: Add scaling factor to frost-level
Significantly increase scaling factor of
/environment/aircraft-effects/frost-level, so that frost effects are
visible.
Add key bindings
Merge pull request #93 from legoboyvdlp/viewkeys
Implement internal moving views
Implement internal moving views
Merge pull request #92 from legoboyvdlp/pfd
Fix VFE next speed bug
Fix VFE next speed bug
Make flashlight work outside as well
Signed-off-by: fly <merspieler@...>
Update comment
I'm not sure about this but...
de-icing is supposed to fix fuselage ice...
Merge pull request #70 from legoboyvdlp/save
Implementing state save between sessions
Merge pull request #90 from legoboyvdlp/cleanup
Removed unused sounds and textures
Merge branch 'dev' into effects
Walker: correct orbit view
Merge branch 'Marsdolphin-dev' into dev
Implement walker from A330
Delete unused file glass-effect2.xml
Rewrite icing parameters computation
Remove unnecessary properties I/O.
Rewrite nasal icing system
Rewrite the iceable components nasal code.
Remove code duplication and excessive setprop/getprop.
Fix that <output-property> tags were ignored.
Model: Fix missing weather effects due to typo
Add the same typo (s/Windsheild/Windshield/) to the fuselage.xml files
to avoid changing fuselage.ac for now.
Added wings condensation effect + spray's effects improvements
Merge pull request #83 from Zaretto/dev
Remove extraneous ^M from files
Remove extraneous ^M from files
Add option to define saved props
Signed-off-by: fly <merspieler@...>
Change label from IDG-A32X to A320-family
vert rev
Merge pull request #79 from legoboyvdlp/pfd
Phase I - PFD improvements
Fix VFE Next, don't show F/S until 400 ft AGL
Fix discont
Fix the CLR button, and fix distance calculation. Needs to neglect discontinuitites still, that broke agagin
Merge branch 'dev' into FMGC
Merge pull request #81 from legoboyvdlp/dev
Merge changes
Double the period of the flashing timers on the PFD
Merge branch 'dev' into pfd
Allow flap entry without THS
Added a few more common controls to be saved
Signed-off-by: fly <merspieler@...>
Accept parameter for save file
Signed-off-by: fly <merspieler@...>
Merge pull request #77 from vezza/dev
Moisture and spray effects + brakes temp calculation improvement
Moisture, engine spray and contrail improvements/optimization
Hide speed symbols on align, VFE NEXT now corresponds to next flap setting, fix MCDU font size
Implement APPR page, fix other PREF pages (buttons not activated yet)
Moisture and contrail effects improvements
Engine's spray improvements
Add green speed dots, increase max speed to 230 when in config 1 (just slats)
Add max flap speed indicator
Add F and S speed indicators for flaps
Remove ilsError_2
Correct LS warning/position, allow LS waring during GS phase, add ILS indication (non-fuctional currently)
Fix entabing
Add V1, VR, V2 speed indications to PFD
Add ILS/ALT/QNH flash, fix PFD2 ALT bug, fix IM position
add engine's spray
Added engines moisture effect, engines spray effect, brake temp modulation according weight /compression-norm), removed brakes temp increase on thrust
Merge pull request #12 from legoboyvdlp/dev
keep aligned with head repo
Correct texture for flaps markings floodlight
Merge pull request #76 from jan-hudec/throttle-binding
Throttle binding update
Merge branch 'legoboyvdlp-dev' into dev
Merge branch 'dev' of https://github.com/legoboyvdlp/A320-family into legoboyvdlp-dev
Make reverse thrust also respect selected engines
The simple toggle, bound to Del, engages reverse on the selected engine,
but if it is engaged on either, disengages it on both, so you don't get
stuck in reverse when selecting engine.
I also removed the check of weight-on-wheels from the disengage case, so
you don't get stuck if somehow the aircraft still becomes airborne after
selecting reverse on the ground.
The finer control, bound to F1 and F2, only controls the selected engines
now. Previous version disengaged reverse for both engines when either
reached zero throttle-rev, which does not seem to be founded in reality
and does not make much sense. You can always use Del to disengage reverse
on both engines.
Make the thrust detent bindings respect selected engines
Now that PgUp/PgDn respect selected engines respects selected engines,
make the TOGA, MCT/FLX and CL shortcuts do so as well.
Idle binding is an exception, because both thrust levers must be set to
idle for spoilers to deploy while one is enough to disengage the A/THR
and you don't want to repeat TAM3054 just because you forgot the
re-select both engines.
Also reset the bindings for 3 and 9 in keyboard mode
Copy the default bindings from `fgdata/keyboard.xml` to the keyboard mode
bindings for 3 and 9 so they behave consistently with PgUp/PgDn.
Remove the broken thrust lever bindings.
The binding say they are for PgUp/PgDn, but `n="33"` is `@` and n="34"
is `"`. I don't think they should be moved to the described keys because:
- The default bindings is what is being used and they work OK.
- When I switched them to `n="360"`/`n="361"` and tested it, the right
thrust lever lagged behind the left one when moving out of detent. It
does not do it with the default binding.
- The bindings break the engine selection logic (both now, because `@` is
select engine #1, and if moved to PgUp/PgDn, because they don't respect
the selection), which can be useful for handing engine failures, and
to which pilots are used from any other aircraft type.
So just remove them.
Removed unused sounds and textures
Signed-off-by: fly <merspieler@...>
Revert "go to next waypoint, don't delete intermediate. MCDU only shows next ones, doesn't show historical ones"
t push
This reverts commit 5e19cbd42cf9391238d308fa2895680711ecf6f7.
save.nas
Signed-off-by: fly <merspieler@...>
Implementing state save between sessions
Signed-off-by: fly <merspieler@...>
go to next waypoint, don't delete intermediate. MCDU only shows next ones, doesn't show historical ones
Merge branch 'dev' into FMGC
Merge branch 'dev' of https://github.com/legoboyvdlp/A320-family into dev
Merge branch 'hayden2000-pfd' into dev
Add c-chord sound (sound only for now), fix IM, show markers anytime you fly over them (they should only show up below about 5000 feet, anyway)
Merge pull request #68 from colingeniet/dev
Add fallback model and interior model tags
Model: Mark flightdeck and cabin as interior
Fix entabing
Only show marker beacons on landing
Model: Add fallback model index
Add marker beacons, prepare for auto ils selection
Moisture effect on engines + brakes temp bug fix
Merge branch 'dev' into fgaddon
Merge branch 'dev' into FMGC
Update zoom / z-offset
Merge branch 'dev' into FMGC
Merge branch 'dev' into fgaddon
Test removing forward slash
Merge branch 'hayden2000-pfd' into dev
Merge branch 'dev' into FMGC
Implement manual ILS mode
Merge branch 'dev' into FMGC
fix
Fix the num
Merge pull request #10 from legoboyvdlp/dev
keep aligned with head repo
Undo that, now the tabs should be good
Attempting to standardize tabs
Fix bug with magnetic_hdg_dif
Merge branch 'dev' of https://github.com/legoboyvdlp/A320-family into pfd
Merge pull request #63 from hayden2000/qnh
Set altimeter on 'Ready for Taxi' or 'Ready for Takeoff'
Commented out checkbox and set temporary default weight unit to LBS
Signed-off-by: fly <merspieler@...>
Merge dev
Signed-off-by: fly <merspieler@...>
Set altimeter on 'Ready for Taxi' or 'Ready for Takeoff'
Entab fixes
Merge branch 'dev' of https://github.com/legoboyvdlp/A320-family into pfd
Add PFD2, fix bugs, adjust positions
Merge branch 'dev' into fgaddon
Merge branch 'vezza-dev' into dev
double the cooling effect, divide engine thrust effect by five
Correct whitespace, remove un-needed things, remove tat calculation
Merge branch 'dev' of https://github.com/vezza/A320-family into vezza-dev
Fix the flightplan, now will show up properly on ND (ID and course), also advancing should work now. However, _num_ doesn't advance atm?
Adjust positions
Fix entabing
Fix bug with DME dist, add CRS pointer
Brakes temp improvements
Bugfix
Push improvements
Merge pull request #9 from legoboyvdlp/dev
Dev
Merge branch 'dev' into FMGc
Bugfix arrival page
Improvements, add ARRIVAL
Merge pull request #8 from legoboyvdlp/dev
keep aligned with head repo
Fix left pushbuttons
Merge branch 'dev' of https://github.com/vezza/A320-family into vezza-dev
Many improvements
Tune brake's temperatures and change brk_fan_on color
Tune brakes temperatures
Merge branch 'dev' of https://github.com/vezza/A320-family into vezza-dev
Push semi-working fpln, segfaults fg due to core bug
Fix typo
Merge branch 'dev' into FMGC
fix
Merge branch 'dev' into FMGC
New FPLN
Adding:
- brakes temperature;
- brake temp indication in LOWER ECAM wheels page;
- Brake fans switch on main panel;
- Brake Hot light on main panel;
- "BRK FAN" ECAM message;
Merge branch 'dev' into FMGC
Merge branch 'dev' into FMGC
Merge branch 'dev' into FMGC
Merge branch 'dev' into FMGC
Merge branch 'dev' into FMGC
Bugfix IESI - no longer flashes on init
Major improvements - discontinuity, lat rev, sequencing, etc
FBW: fix stupid bug
Add working DEPARTURE page
Merge branch 'dev' into FMGC
Add Octal's FMGC back in, extend with LAT REV page
Added KGS to refuel panel
Signed-off-by: fly <merspieler@...>
Fix ECAM
Signed-off-by: fly <merspieler@...>
Merge master
Signed-off-by: fly <merspieler@...>
Merge branch 'master' into kgs
Upper ECAM
Signed-off-by: merspieler <merspieler@...>
Config option
Signed-off-by: merspieler <merspieler@...>
Lower ECAM in kgs or lbs
Signed-off-by: merspieler <merspieler@...>
Named with labels in .svg files
Signed-off-by: merspieler <merspieler@...>
