Re: [flexbackup-help] writing to `/dev/nst0': Input/output error

[Michele C. <mi...@pr...>]

I checked everything... but nothing changed.
I'd like to know if is a hardware or flexbackup problem.

Dudi Goldenberg wrote:
> Is this a new install?
>
> I'd clean the drive just to be safe, then check SCSI termination etc.
>
> D.
>
> -----Original Message-----
> From: Michele Cerioni [mailto:mi...@pr...]
> Sent: Wednesday, March 16, 2011 11:35
> To: fle...@li...
> Subject: Re: [flexbackup-help] writing to `/dev/nst0': Input/output error
>
> I could try, but the drive is new, and I used two new data cartridge.
>
> Dudi Goldenberg wrote:
>>
>>> #mt -f /dev/nst0 rewind
>>> #dd if=/dev/nst0 of=/tmp/provadd2 bs=64k
>>> dd: reading `/dev/nst0': Input/output error
>>> dd: closing input file `/dev/nst0': Input/output error
>>>
>>> May be a hardware problem?
>>
>> Did you try to clean the drive?
>>
>> D.
>
>
> ------------------------------------------------------------------------------
> Colocation vs. Managed Hosting
> A question and answer guide to determining the best fit
> for your organization - today and in the future.
> http://p.sf.net/sfu/internap-sfd2d
> _______________________________________________
> flexbackup-help mailing list
> fle...@li...
> https://lists.sourceforge.net/lists/listinfo/flexbackup-help
>