RE: [flexbackup-help] blksize parameters (fwd)

[<Erw...@sy...>]

Hi list and niall=20

Can you run a simple tar to the drive?

mt -f /dev/st0  status

- I've already answered=20

mt -f /dev/st0  rewind

Nothing too

[root@annuaire31 flextest]# tar cf /dev/nst0 /etc
tar: Retrait de l'en-t=C3=AAte `/' des noms des membres

mt -f /dev/st0  rewind
Take time but ok

tar tf /dev/nst0
Ok it show me all the tar that I've done.



Try manually setting the blocksize to the same as what you're using in the
script.

"mt -f /dev/st0 setblk 1024"
and use
$mt_blksize =3D "1024";

I've done it and do a=20
Flexbackup-test-tape-drive but it's not better.

Thanks for all

Niall




********************************************************************

This email may contain information which is privileged or confidential. If =
you are not the intended recipient of this email, please notify the sender =
immediately and delete it without reading, copying, storing, forwarding or =
disclosing its contents to any other person
Thank you

Check us out at http://www.bt.com/consulting

********************************************************************