Hello All,
It seems to be a recurring problem that with running flexback via
command
line it runs fine, even manually running the cron script.
Though when I let the cron job run this is all I get:
|------------------------------------------------------------
| Doing level 0 backup of /home using cpio
| Rewinding & erasing tape...
| Creating index key 200401262000
|------------------------------------------------------------
At block 0.
|------------------------------------------------------------
| File number 1, tape index 200401262000
| Backup of: /home
| Date of this level 0 backup: Mon Jan 26 20:00:30 2004
| Date of last level 0 backup: the epoch
|------------------------------------------------------------
| touch "/home/level 0 -home Mon Jan 26 20:00:30 2004 cpio+hardware from \
| redhat"
| cd "/home" && find . -depth -xdev ! -type s ! -regex ".*/[Cc]ache/.*" ! \
| -regex ".*~"$ -print0 | cpio -o -0 -H newc -v -C 10240 | buffer -m 15m \
| -p 75 -s 10k -t -u 100 -B -o "/dev/st0"
| rm -f "/home/level 0 -home Mon Jan 26 20:00:30 2004 cpio+hardware from \
| redhat"
|------------------------------------------------------------
But of course there is no file listing indicating a complete backup as
there would be if the backup was successful or run manually in our case.
Is there any known issues that would cause this?
Thanks
Shaun
E-Mail Disclaimer : http://www.altron.co.za/email.asp
Should you have any questions regarding this e-mail legal notice please contact us on
1. Telephone number : +27116453600
2. Fax number : +27117263009
3. E-mail address : in...@al... |
