https://sourceforge.net/p/flexamysynth/wiki/Installation/Recent changes to InstallationenSat, 14 Mar 2015 17:28:54 -0000https://sourceforge.net/p/flexamysynth/wiki/Installation/<div class="markdown_content"><h1 id="installation">INSTALLATION</h1> <p>1. Unpack the FlexamySynh.rar archive to your <em>Arduino</em>/libraries folder. Make sure the target folder is <em>Arduino</em>/libraries/<a class="" href="/p/flexamysynth/wiki/FlexamySynth">FlexamySynth</a>. </p> <p>2. Enable versioning support in the library: </p> <p>2a. If You use Arduino older than 1.0, move the provided 'Arduino.h' file to your <em>Arduino</em>/hardware/arduino/cores/arduino directory. </p> <blockquote> <p>OR </p> </blockquote> <p>2b. If You use Arduino 1.0 or newer, add the following entry to your <em>Arduino</em>/hardware/arduino/cores/arduino/Arduino.h file: </p> <blockquote> <p><code>#define _ARDUINO_VER 0x0100</code></p> </blockquote> <p>and delete the provided stub version Arduino.h. </p> <p>3. Optionally, if you use Arduino 1.0 or newer and already have the NewSoftSerial library installed, you may delete the provided version, and use your pre-existing one. (untested) </p></div>AnonymousSat, 14 Mar 2015 17:28:54 -0000https://sourceforge.net46c5dfc7e24e8b4e313aa530637cf431543c1364