Phil,
it seems it works now. The input file looks now:
wait 1000 ms
0a 0d
wait 1000 ms
"100 100" 0a 0d
wait 1000 ms
" + " 0a 0d
wait 1000 ms
"." 0a 0d
wait 1000 ms
0a 0d
and the output:
FlashForth V4.71 (C) Mikael Nordman GPL V3
ok <#,ram>
ok <#,ram>
100 100 + . 200 ok <#,ram>
ok <#,ram>
So you have to use 0a 0d sequence for entering the line (not 0d 0a
as I did before)..
73, Igor
----- PŮVODNÍ ZPRÁVA -----
Od: "F5iwl" <f5...@ne...>
Komu: "om1zz" <om...@vo...>
Předmět: Re: [Flashforth-devel] Flashforth - simulation in MPLAB
8.66
Datum: 8.5.2011 - 9:56:25
> Hi Igor,
>
> What puzzles me is that you don't get the
> aknowledge for each entry after
> CR/LF
> You should see : 100 100 ok <#,ram>
> then: + ok <#,ram>
> and then the result printed as per the DOT
> request.
>
> It looks like you are only getting an echo from
> the simulator of what the
> file contains.
> I have never used the MPLAB simulator. My question
> is do you provide the
> simulator with the CPU type you simulate?
>
> What happens if you create a file with the
> following : WARM 0d/0a
> Does it resets FlashForth.
>
> 73
> Phil
>
> ----- Original Message -----
> From: "om1zz" <om...@vo...>
> To: <fla...@li...>
> Sent: Saturday, May 07, 2011 4:41 PM
> Subject: [Flashforth-devel] Flashforth -
> simulation in MPLAB 8.66
>
>
>
> Hi, this is maybe not directly connected to
> flashforth but mplab -
> I'm trying to run flashforth 4.71 in mplab
> simulator and print uart
> output to simulator output window (works somehow)
> and input some
> commands to flashforth.. However, the guys from
> mplab provide only
> an input from the file (not directly from
> keyboard).
> The file content looks like this (issued
> automaticly after FF
> reset):
>
> wait 1000 ms
> 0d 0a
> wait 1000 ms
> "100 100" 0d 0a
> wait 1000 ms
> " + " 0d 0a
> wait 1000 ms
> "." 0d 0a
> wait 1000 ms
>
> I'm getting this as the output:
>
> FlashForth V4.71 (C) Mikael Nordman GPL V3
>
> ok <#,ram>
> 100 100 + .
>
> So I'm not able to get any result showing it
> works. Any hint?
> Thanks,
> Igor
>
>
> --
> VOLNÝ Klub, limitované kolekce značek jako Nike,
> Represent, Bench,
> Tommy Hilfiger, LG a další se slevami 40 - 80 %.
> http://klub.volny.cz
>
>
> ------------------------------------------------------------------------------
> > WhatsUp Gold - Download Free Network Management
> Software
> The most intuitive, comprehensive, and
> cost-effective network
> management toolset available today. Delivers
> lowest initial
> acquisition cost and overall TCO of any competing
> solution.
> http://p.sf.net/sfu/whatsupgold-sd
> _______________________________________________
> Flashforth-devel mailing list
> Fla...@li...
> https://lists.sourceforge.net/lists/listinfo/flashforth-devel
>
>
>
|
