[Flared-svn-002] SF.net SVN: flared: [3] src
Status: Beta
Brought to you by:
masaki-fujimoto
Menu
▾
▴
[Flared-svn-002] SF.net SVN: flared: [3] src
|
From: <mas...@us...> - 2007-12-11 03:21:41
|
Revision: 3
http://flared.svn.sourceforge.net/flared/?rev=3&view=rev
Author: masaki-fujimoto
Date: 2007-12-10 19:21:46 -0800 (Mon, 10 Dec 2007)
Log Message:
-----------
- update, and added configure things
Modified Paths:
--------------
ChangeLog
configure.ac
Added Paths:
-----------
Makefile.in
aclocal.m4
configure
src/Makefile.in
src/config.h.in
src/stamp-h.in
Modified: ChangeLog
===================================================================
--- ChangeLog 2007-12-11 02:59:43 UTC (rev 2)
+++ ChangeLog 2007-12-11 03:21:46 UTC (rev 3)
@@ -1,5 +1,9 @@
-No commit for revision 0.
------------------------------------------------------------------------
+r2 | masaki-fujimoto | 2007-12-11 11:59:43 +0900 (Tue, 11 Dec 2007) | 2 lines
+
+- (perhaps) ready for initial release (0.9.0)
+
+------------------------------------------------------------------------
r1 | masaki-fujimoto | 2007-12-11 10:30:10 +0900 (Tue, 11 Dec 2007) | 2 lines
- initial commit (adding AUTHORS)
Added: Makefile.in
===================================================================
--- Makefile.in (rev 0)
+++ Makefile.in 2007-12-11 03:21:46 UTC (rev 3)
@@ -0,0 +1,335 @@
+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+#
+# Makefile.am
+#
+# $Id$
+#
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+CC = @CC@
+CXX = @CXX@
+FLARE_CXXFLAGS = @FLARE_CXXFLAGS@
+FLARE_LDFLAGS = @FLARE_LDFLAGS@
+HAVE_LIB = @HAVE_LIB@
+LIB = @LIB@
+LTLIB = @LTLIB@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+
+SUBDIRS = src
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = ./src/config.h
+CONFIG_CLEAN_FILES =
+DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
+Makefile.in NEWS aclocal.m4 config.guess config.sub configure \
+configure.ac install-sh missing mkinstalldirs
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+ cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): configure.ac
+ cd $(srcdir) && $(ACLOCAL)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+$(srcdir)/configure: $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+ cd $(srcdir) && $(AUTOCONF)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+ rev="$$subdir $$rev"; \
+ test "$$subdir" != "." || dot_seen=yes; \
+ done; \
+ test "$$dot_seen" = "no" && rev=". $$rev"; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ here=`pwd` && cd $(srcdir) \
+ && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+ -rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ -rm -rf $(distdir)
+ GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+ mkdir $(distdir)/=build
+ mkdir $(distdir)/=inst
+ dc_install_base=`cd $(distdir)/=inst && pwd`; \
+ cd $(distdir)/=build \
+ && ../configure --srcdir=.. --prefix=$$dc_install_base \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) dist
+ -rm -rf $(distdir)
+ @banner="$(distdir).tar.gz is ready for distribution"; \
+ dashes=`echo "$$banner" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ echo "$$dashes"
+dist: distdir
+ -chmod -R a+r $(distdir)
+ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ -rm -rf $(distdir)
+dist-all: distdir
+ -chmod -R a+r $(distdir)
+ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ -rm -rf $(distdir)
+distdir: $(DISTFILES)
+ -rm -rf $(distdir)
+ mkdir $(distdir)
+ -chmod 777 $(distdir)
+ here=`cd $(top_builddir) && pwd`; \
+ top_distdir=`cd $(distdir) && pwd`; \
+ distdir=`cd $(distdir) && pwd`; \
+ cd $(top_srcdir) \
+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+ for subdir in $(SUBDIRS); do \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ chmod 777 $(distdir)/$$subdir; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+ || exit 1; \
+ fi; \
+ done
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+install-exec-am:
+install-exec: install-exec-recursive
+
+install-data-am:
+install-data: install-data-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am:
+uninstall: uninstall-recursive
+all-am: Makefile
+all-redirect: all-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am: mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am: clean-tags clean-generic mostlyclean-am
+
+clean: clean-recursive
+
+distclean-am: distclean-tags distclean-generic clean-am
+
+distclean: distclean-recursive
+ -rm -f config.status
+
+maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
+ distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f config.status
+
+.PHONY: install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs-am \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Added: aclocal.m4
===================================================================
--- aclocal.m4 (rev 0)
+++ aclocal.m4 2007-12-11 03:21:46 UTC (rev 3)
@@ -0,0 +1,976 @@
+dnl aclocal.m4t generated automatically by aclocal 1.4-p6
+
+dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+
+# lib-prefix.m4 serial 4 (gettext-0.14.2)
+dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
+dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
+dnl require excessive bracketing.
+ifdef([AC_HELP_STRING],
+[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
+[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
+
+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
+dnl to access previously installed libraries. The basic assumption is that
+dnl a user will want packages to use other packages he previously installed
+dnl with the same --prefix option.
+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
+dnl libraries, but is otherwise very convenient.
+AC_DEFUN([AC_LIB_PREFIX],
+[
+ AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
+ AC_REQUIRE([AC_PROG_CC])
+ AC_REQUIRE([AC_CANONICAL_HOST])
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_LIB_ARG_WITH([lib-prefix],
+[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
+ --without-lib-prefix don't search for libraries in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+])
+ if test $use_additional = yes; then
+ dnl Potentially add $additional_includedir to $CPPFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's already present in $CPPFLAGS,
+ dnl 3. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ for x in $CPPFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $CPPFLAGS.
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ dnl Potentially add $additional_libdir to $LDFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's already present in $LDFLAGS,
+ dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ for x in $LDFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LDFLAGS.
+ LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ fi
+])
+
+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
+dnl acl_final_exec_prefix, containing the values to which $prefix and
+dnl $exec_prefix will expand at the end of the configure script.
+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
+[
+ dnl Unfortunately, prefix and exec_prefix get only finally determined
+ dnl at the end of configure.
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
+dnl variables prefix and exec_prefix bound to the values they will have
+dnl at the end of the configure script.
+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
+[
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ $1
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+])
+
+# lib-link.m4 serial 6 (gettext-0.14.3)
+dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_PREREQ(2.50)
+
+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
+dnl augments the CPPFLAGS variable.
+AC_DEFUN([AC_LIB_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ define([Name],[translit([$1],[./-], [___])])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+ ac_cv_lib[]Name[]_libs="$LIB[]NAME"
+ ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
+ ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+ ])
+ LIB[]NAME="$ac_cv_lib[]Name[]_libs"
+ LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
+ INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
+ dnl results of this search when this library appears as a dependency.
+ HAVE_LIB[]NAME=yes
+ undefine([Name])
+ undefine([NAME])
+])
+
+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
+dnl searches for libname and the libraries corresponding to explicit and
+dnl implicit dependencies, together with the specified include files and
+dnl the ability to compile and link the specified testcode. If found, it
+dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
+dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ define([Name],[translit([$1],[./-], [___])])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+
+ dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+
+ dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed lib[]Name and not disabled its use
+ dnl via --without-lib[]Name-prefix, he wants to use it.
+ ac_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+
+ AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIB[]NAME"
+ AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
+ LIBS="$ac_save_LIBS"
+ ])
+ if test "$ac_cv_lib[]Name" = yes; then
+ HAVE_LIB[]NAME=yes
+ AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
+ AC_MSG_CHECKING([how to link with lib[]$1])
+ AC_MSG_RESULT([$LIB[]NAME])
+ else
+ HAVE_LIB[]NAME=no
+ dnl If $LIB[]NAME didn't lead to a usable library, we don't need
+ dnl $INC[]NAME either.
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIB[]NAME=
+ LTLIB[]NAME=
+ fi
+ AC_SUBST([HAVE_LIB]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ undefine([Name])
+ undefine([NAME])
+])
+
+dnl Determine the platform dependent parameters needed to use rpath:
+dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
+dnl hardcode_direct, hardcode_minus_L.
+AC_DEFUN([AC_LIB_RPATH],
+[
+ dnl Tell automake >= 1.10 to complain if config.rpath is missing.
+ m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
+ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
+ AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
+ AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
+ AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
+ AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+ ])
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ dnl Determine whether the user wants rpath handling at all.
+ AC_ARG_ENABLE(rpath,
+ [ --disable-rpath do not hardcode runtime library paths],
+ :, enable_rpath=yes)
+])
+
+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
+[
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_LIB_ARG_WITH([lib$1-prefix],
+[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
+ --without-lib$1-prefix don't search for lib$1 in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+])
+ dnl Search the library and its dependencies in $additional_libdir and
+ dnl $LDFLAGS. Using breadth-first-seach.
+ LIB[]NAME=
+ LTLIB[]NAME=
+ INC[]NAME=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='$1 $2'
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
+ dnl or AC_LIB_HAVE_LINKFLAGS call.
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
+ else
+ dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
+ dnl that this library doesn't exist. So just drop it.
+ :
+ fi
+ else
+ dnl Search the library lib$name in $additional_libdir and $LDFLAGS
+ dnl and the already constructed $LIBNAME/$LTLIBNAME.
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ dnl Found the library.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ dnl Linking with a shared library. We attempt to hardcode its
+ dnl directory into the executable's runpath, unless it's the
+ dnl standard /usr/lib.
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ dnl No hardcoding is needed.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ dnl The hardcoding into $LIBNAME is system dependent.
+ if test "$hardcode_direct" = yes; then
+ dnl Using DIR/libNAME.so during linking hardcodes DIR into the
+ dnl resulting binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ dnl Rely on "-L$found_dir".
+ dnl But don't add it if it's already contained in the LDFLAGS
+ dnl or the already constructed $LIBNAME
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
+ dnl here, because this doesn't fit in flags passed to the
+ dnl compiler. So give up. No hardcoding. This affects only
+ dnl very old systems.
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ dnl Linking with a static library.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
+ else
+ dnl We shouldn't come here, but anyway it's good to have a
+ dnl fallback.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
+ fi
+ fi
+ dnl Assume the include files are nearby.
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ dnl Potentially add $additional_includedir to $INCNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 3. if it's already present in $CPPFLAGS or the already
+ dnl constructed $INCNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INC[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $INCNAME.
+ INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ dnl Look for dependencies.
+ if test -n "$found_la"; then
+ dnl Read the .la file. It defines the variables
+ dnl dlname, library_names, old_library, dependency_libs, current,
+ dnl age, revision, installed, dlopen, dlpreopen, libdir.
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ dnl We use only dependency_libs.
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 3. if it's already present in $LDFLAGS or the already
+ dnl constructed $LIBNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LIBNAME.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LTLIBNAME.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ dnl Handle this in the next round.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ dnl Handle this in the next round. Throw away the .la's
+ dnl directory; it is already contained in a preceding -L
+ dnl option.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ dnl Most likely an immediate library name.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ dnl Didn't find the library; assume it is in the system directories
+ dnl known to the linker and runtime loader. (All the system
+ dnl directories known to the linker should also be known to the
+ dnl runtime loader, otherwise the system is severely misconfigured.)
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ dnl Weird platform: only the last -rpath option counts, the user must
+ dnl pass all path elements in one option. We can arrange that for a
+ dnl single library, but not when more than one $LIBNAMEs are used.
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ else
+ dnl The -rpath options are cumulative.
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ dnl When using libtool, the option that works for both libraries and
+ dnl executables is -R. The -R options are cumulative.
+ for found_dir in $ltrpathdirs; do
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
+ done
+ fi
+])
+
+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
+dnl unless already present in VAR.
+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
+dnl contains two or three consecutive elements that belong together.
+AC_DEFUN([AC_LIB_APPENDTOVAR],
+[
+ for element in [$2]; do
+ haveit=
+ for x in $[$1]; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ [$1]="${[$1]}${[$1]:+ }$element"
+ fi
+ done
+])
+
+# lib-ld.m4 serial 3 (gettext-0.13)
+dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Subroutines of libtool.m4,
+dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
+dnl with libtool.m4.
+
+dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
+AC_DEFUN([AC_LIB_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ acl_cv_prog_gnu_ld=yes ;;
+*)
+ acl_cv_prog_gnu_ld=no ;;
+esac])
+with_gnu_ld=$acl_cv_prog_gnu_ld
+])
+
+dnl From libtool-1.4. Sets the variable LD.
+AC_DEFUN([AC_LIB_PROG_LD],
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]* | [A-Za-z]:[\\/]*)]
+ [re_direlt='/[^/][^/]*/\.\./']
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(acl_cv_path_LD,
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break ;;
+ *)
+ test "$with_gnu_ld" != yes && break ;;
+ esac
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_LIB_PROG_LD_GNU
+])
+
+# Do all the work for Automake. This macro actually does too much --
+# some checks are only needed if your package does certain things.
+# But this isn't really a big deal.
+
+# serial 1
+
+dnl Usage:
+dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])
+PACKAGE=[$1]
+AC_SUBST(PACKAGE)
+VERSION=[$2]
+AC_SUBST(VERSION)
+dnl test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+ifelse([$3],,
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
+AC_REQUIRE([AM_SANITY_CHECK])
+AC_REQUIRE([AC_ARG_PROGRAM])
+dnl FIXME This is truly gross.
+missing_dir=`cd $ac_aux_dir && pwd`
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir)
+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir)
+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+AC_REQUIRE([AC_PROG_MAKE_SET])])
+
+# Copyright 2002 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+ [AM_AUTOMAKE_VERSION([1.4-p6])])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+ if test "[$]*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftestfile`
+ fi
+ if test "[$]*" != "X $srcdir/configure conftestfile" \
+ && test "[$]*" != "X conftestfile $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "[$]2" = conftestfile
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+rm -f conftest*
+AC_MSG_RESULT(yes)])
+
+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+dnl The program must properly implement --version.
+AC_DEFUN([AM_MISSING_PROG],
+[AC_MSG_CHECKING(for working $2)
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if ($2 --version) < /dev/null > /dev/null 2>&1; then
+ $1=$2
+ AC_MSG_RESULT(found)
+else
+ $1="$3/missing $2"
+ AC_MSG_RESULT(missing)
+fi
+AC_SUBST($1)])
+
+# Like AC_CONFIG_HEADER, but automatically create stamp file.
+
+AC_DEFUN([AM_CONFIG_HEADER],
+[AC_PREREQ([2.12])
+AC_CONFIG_HEADER([$1])
+dnl When config.status generates a header, we must update the stamp-h file.
+dnl This file resides in the same directory as the config header
+dnl that is generated. We must strip everything past the first ":",
+dnl and everything past the last "/".
+AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
+ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
+<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
+<<am_indx=1
+for am_file in <<$1>>; do
+ case " <<$>>CONFIG_HEADERS " in
+ *" <<$>>am_file "*<<)>>
+ echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
+ ;;
+ esac
+ am_indx=`expr "<<$>>am_indx" + 1`
+done<<>>dnl>>)
+changequote([,]))])
+
Added: configure
===================================================================
--- configure (rev 0)
+++ configure 2007-12-11 03:21:46 UTC (rev 3)
@@ -0,0 +1,5282 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.59 for flare 0.9.0.
+#
+# Copyright (C) 2003 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete. It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME='flare'
+PACKAGE_TARNAME='flare'
+PACKAGE_VERSION='0.9.0'
+PACKAGE_STRING='flare 0.9.0'
+PACKAGE_BUGREPORT=''
+
+ac_unique_file="src/flare.cc"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#if HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#if STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# if HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#if HAVE_STRING_H
+# if !STDC_HEADERS && HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#if HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#if HAVE_INTTYPES_H
+# include <inttypes.h>
+#else
+# if HAVE_STDINT_H
+# include <stdint.h>
+# endif
+#endif
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE build build_cpu build_vendor build_os host host_cpu host_vendor host_os CXX CXXFLAGS LDFLAGS CPPFLAGS ac_ct_CXX EXEEXT OBJEXT CC CFLAGS ac_ct_CC CPP EGREP FLARE_CXXFLAGS FLARE_LDFLAGS LIBOBJS LTLIBOBJS'
+ac_subst_files=''
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/et...
[truncated message content] |
