Menu
▾
▴
firebird-devel
|
From: <no...@so...> - 2001-11-22 18:20:37
|
Bugs item #484627, was opened at 2001-11-22 10:20 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 Category: Core Engine Group: Initial Bug Status: Open Resolution: None Priority: 5 Submitted By: Michael Gast (mgast) Assigned to: Nobody/Anonymous (nobody) Summary: UDF are not longer accessible Initial Comment: When i try to use an existing UDF i get the error message: function <FUNCTION_NAME> is not defined. The UDF library and all UDF definitions are working fine with prior Firebird releases except RC1. My Firebird installation is running under Suse Linux 7.1. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 |
|
From: <no...@so...> - 2001-11-23 01:38:11
|
Bugs item #484627, was opened at 2001-11-22 10:20 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 Category: Core Engine Group: Initial Bug Status: Open Resolution: None Priority: 5 Submitted By: Michael Gast (mgast) Assigned to: Nobody/Anonymous (nobody) Summary: UDF are not longer accessible Initial Comment: When i try to use an existing UDF i get the error message: function <FUNCTION_NAME> is not defined. The UDF library and all UDF definitions are working fine with prior Firebird releases except RC1. My Firebird installation is running under Suse Linux 7.1. ---------------------------------------------------------------------- >Comment By: Mark ODonohue (skywalker) Date: 2001-11-22 17:38 Message: Logged In: YES user_id=57768 The way linux/unix firebird loads ib_util, it will not find the library if it has a lib prefix or a .so extension. (This is fixed in fb2). The next unix install for fb1 will leave it as ib_util. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 |
|
From: <no...@so...> - 2001-11-23 07:15:58
|
Bugs item #484627, was opened at 2001-11-22 10:20 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 Category: Core Engine Group: Initial Bug Status: Open Resolution: None Priority: 5 Submitted By: Michael Gast (mgast) Assigned to: Nobody/Anonymous (nobody) Summary: UDF are not longer accessible Initial Comment: When i try to use an existing UDF i get the error message: function <FUNCTION_NAME> is not defined. The UDF library and all UDF definitions are working fine with prior Firebird releases except RC1. My Firebird installation is running under Suse Linux 7.1. ---------------------------------------------------------------------- >Comment By: Michael Gast (mgast) Date: 2001-11-22 23:15 Message: Logged In: YES user_id=382978 I try to use the MERS UDF library. The file is named 'udflib'. There is no prefix and no extension. It is an ELF library compiled with GCC(egcs-2.91.66 from 03/14/1999). I used this library with all former versions of Interbase 6 and Firebird for the last two years. Only RC1 does not find the entry points within the module. The standard UDF library can be used. As both libraries are in the same directory, it cannot ne a problem of the UDF path. ---------------------------------------------------------------------- Comment By: Mark ODonohue (skywalker) Date: 2001-11-22 17:38 Message: Logged In: YES user_id=57768 The way linux/unix firebird loads ib_util, it will not find the library if it has a lib prefix or a .so extension. (This is fixed in fb2). The next unix install for fb1 will leave it as ib_util. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 |
|
From: <no...@so...> - 2001-11-23 12:02:38
|
Bugs item #484627, was opened at 2001-11-22 10:20 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 Category: Core Engine Group: Initial Bug Status: Open Resolution: None Priority: 5 Submitted By: Michael Gast (mgast) Assigned to: Nobody/Anonymous (nobody) Summary: UDF are not longer accessible Initial Comment: When i try to use an existing UDF i get the error message: function <FUNCTION_NAME> is not defined. The UDF library and all UDF definitions are working fine with prior Firebird releases except RC1. My Firebird installation is running under Suse Linux 7.1. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-23 04:02 Message: Logged In: YES user_id=346895 It's happening to me, too. My system is a RedHat 7.1 I was expecing to migrate all my clients to FB, but i coldn't do it now because of this. ---------------------------------------------------------------------- Comment By: Michael Gast (mgast) Date: 2001-11-22 23:15 Message: Logged In: YES user_id=382978 I try to use the MERS UDF library. The file is named 'udflib'. There is no prefix and no extension. It is an ELF library compiled with GCC(egcs-2.91.66 from 03/14/1999). I used this library with all former versions of Interbase 6 and Firebird for the last two years. Only RC1 does not find the entry points within the module. The standard UDF library can be used. As both libraries are in the same directory, it cannot ne a problem of the UDF path. ---------------------------------------------------------------------- Comment By: Mark ODonohue (skywalker) Date: 2001-11-22 17:38 Message: Logged In: YES user_id=57768 The way linux/unix firebird loads ib_util, it will not find the library if it has a lib prefix or a .so extension. (This is fixed in fb2). The next unix install for fb1 will leave it as ib_util. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 |
|
From: <no...@so...> - 2001-11-24 09:51:28
|
Bugs item #484627, was opened at 2001-11-22 10:20 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 Category: Core Engine Group: Initial Bug Status: Open Resolution: None Priority: 5 Submitted By: Michael Gast (mgast) Assigned to: Nobody/Anonymous (nobody) Summary: UDF are not longer accessible Initial Comment: When i try to use an existing UDF i get the error message: function <FUNCTION_NAME> is not defined. The UDF library and all UDF definitions are working fine with prior Firebird releases except RC1. My Firebird installation is running under Suse Linux 7.1. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-24 01:51 Message: Logged In: YES user_id=346895 I renamed my udflib (from MERS) to ib_udf and recreate the functions and it still doesn't works. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-23 04:02 Message: Logged In: YES user_id=346895 It's happening to me, too. My system is a RedHat 7.1 I was expecing to migrate all my clients to FB, but i coldn't do it now because of this. ---------------------------------------------------------------------- Comment By: Michael Gast (mgast) Date: 2001-11-22 23:15 Message: Logged In: YES user_id=382978 I try to use the MERS UDF library. The file is named 'udflib'. There is no prefix and no extension. It is an ELF library compiled with GCC(egcs-2.91.66 from 03/14/1999). I used this library with all former versions of Interbase 6 and Firebird for the last two years. Only RC1 does not find the entry points within the module. The standard UDF library can be used. As both libraries are in the same directory, it cannot ne a problem of the UDF path. ---------------------------------------------------------------------- Comment By: Mark ODonohue (skywalker) Date: 2001-11-22 17:38 Message: Logged In: YES user_id=57768 The way linux/unix firebird loads ib_util, it will not find the library if it has a lib prefix or a .so extension. (This is fixed in fb2). The next unix install for fb1 will leave it as ib_util. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 |
|
From: <no...@so...> - 2001-11-25 18:11:49
|
Bugs item #484627, was opened at 2001-11-22 10:20 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 Category: Core Engine Group: Initial Bug Status: Open Resolution: None Priority: 5 Submitted By: Michael Gast (mgast) Assigned to: Nobody/Anonymous (nobody) Summary: UDF are not longer accessible Initial Comment: When i try to use an existing UDF i get the error message: function <FUNCTION_NAME> is not defined. The UDF library and all UDF definitions are working fine with prior Firebird releases except RC1. My Firebird installation is running under Suse Linux 7.1. ---------------------------------------------------------------------- >Comment By: Andrei Kireev (andreik) Date: 2001-11-25 10:11 Message: Logged In: YES user_id=62876 I also had similar problem with RC1 build 557. I had a table with calculated field which uses UDF and during restore the error message UDF is not defined appeared. I think this because FB first tries to restore table and only then restore UDFs from backup. Just yesterday had downloaded RC1 build 608 and will check this problem against it. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-24 01:51 Message: Logged In: YES user_id=346895 I renamed my udflib (from MERS) to ib_udf and recreate the functions and it still doesn't works. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-23 04:02 Message: Logged In: YES user_id=346895 It's happening to me, too. My system is a RedHat 7.1 I was expecing to migrate all my clients to FB, but i coldn't do it now because of this. ---------------------------------------------------------------------- Comment By: Michael Gast (mgast) Date: 2001-11-22 23:15 Message: Logged In: YES user_id=382978 I try to use the MERS UDF library. The file is named 'udflib'. There is no prefix and no extension. It is an ELF library compiled with GCC(egcs-2.91.66 from 03/14/1999). I used this library with all former versions of Interbase 6 and Firebird for the last two years. Only RC1 does not find the entry points within the module. The standard UDF library can be used. As both libraries are in the same directory, it cannot ne a problem of the UDF path. ---------------------------------------------------------------------- Comment By: Mark ODonohue (skywalker) Date: 2001-11-22 17:38 Message: Logged In: YES user_id=57768 The way linux/unix firebird loads ib_util, it will not find the library if it has a lib prefix or a .so extension. (This is fixed in fb2). The next unix install for fb1 will leave it as ib_util. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 |
|
From: <no...@so...> - 2001-11-25 18:19:55
|
Bugs item #484627, was opened at 2001-11-22 10:20 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 Category: Core Engine Group: Initial Bug Status: Open Resolution: None Priority: 5 Submitted By: Michael Gast (mgast) Assigned to: Nobody/Anonymous (nobody) Summary: UDF are not longer accessible Initial Comment: When i try to use an existing UDF i get the error message: function <FUNCTION_NAME> is not defined. The UDF library and all UDF definitions are working fine with prior Firebird releases except RC1. My Firebird installation is running under Suse Linux 7.1. ---------------------------------------------------------------------- >Comment By: Andrei Kireev (andreik) Date: 2001-11-25 10:19 Message: Logged In: YES user_id=62876 I also had similar problem with RC1 build 557. I had a table with calculated field which uses UDF and during restore the error message UDF is not defined appeared. I think this because FB first tries to restore table and only then restore UDFs from backup. Just yesterday had downloaded RC1 build 608 and will check this problem against it. ---------------------------------------------------------------------- Comment By: Andrei Kireev (andreik) Date: 2001-11-25 10:11 Message: Logged In: YES user_id=62876 I also had similar problem with RC1 build 557. I had a table with calculated field which uses UDF and during restore the error message UDF is not defined appeared. I think this because FB first tries to restore table and only then restore UDFs from backup. Just yesterday had downloaded RC1 build 608 and will check this problem against it. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-24 01:51 Message: Logged In: YES user_id=346895 I renamed my udflib (from MERS) to ib_udf and recreate the functions and it still doesn't works. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-23 04:02 Message: Logged In: YES user_id=346895 It's happening to me, too. My system is a RedHat 7.1 I was expecing to migrate all my clients to FB, but i coldn't do it now because of this. ---------------------------------------------------------------------- Comment By: Michael Gast (mgast) Date: 2001-11-22 23:15 Message: Logged In: YES user_id=382978 I try to use the MERS UDF library. The file is named 'udflib'. There is no prefix and no extension. It is an ELF library compiled with GCC(egcs-2.91.66 from 03/14/1999). I used this library with all former versions of Interbase 6 and Firebird for the last two years. Only RC1 does not find the entry points within the module. The standard UDF library can be used. As both libraries are in the same directory, it cannot ne a problem of the UDF path. ---------------------------------------------------------------------- Comment By: Mark ODonohue (skywalker) Date: 2001-11-22 17:38 Message: Logged In: YES user_id=57768 The way linux/unix firebird loads ib_util, it will not find the library if it has a lib prefix or a .so extension. (This is fixed in fb2). The next unix install for fb1 will leave it as ib_util. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 |
|
From: <no...@so...> - 2001-11-25 19:48:13
|
Bugs item #484627, was opened at 2001-11-22 10:20 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 Category: Core Engine Group: Initial Bug Status: Open Resolution: None Priority: 5 Submitted By: Michael Gast (mgast) Assigned to: Nobody/Anonymous (nobody) Summary: UDF are not longer accessible Initial Comment: When i try to use an existing UDF i get the error message: function <FUNCTION_NAME> is not defined. The UDF library and all UDF definitions are working fine with prior Firebird releases except RC1. My Firebird installation is running under Suse Linux 7.1. ---------------------------------------------------------------------- >Comment By: Frank Schlottmann-Goedde (fsg) Date: 2001-11-25 11:48 Message: Logged In: YES user_id=70223 I have tested udflib (dated march 13 2000) returns 1.2 whith "select ver() from ..." and it works with LI-T1.0.0.608. Note that substr is an internal function now and you should replace the substr declaration with mer_substr (as has been done with the day, time etc. functions) try to run udfrem.sql on your db, and redeclare the functions you need. I don't thimk that this is a bug. fsg ---------------------------------------------------------------------- Comment By: Andrei Kireev (andreik) Date: 2001-11-25 10:19 Message: Logged In: YES user_id=62876 I also had similar problem with RC1 build 557. I had a table with calculated field which uses UDF and during restore the error message UDF is not defined appeared. I think this because FB first tries to restore table and only then restore UDFs from backup. Just yesterday had downloaded RC1 build 608 and will check this problem against it. ---------------------------------------------------------------------- Comment By: Andrei Kireev (andreik) Date: 2001-11-25 10:11 Message: Logged In: YES user_id=62876 I also had similar problem with RC1 build 557. I had a table with calculated field which uses UDF and during restore the error message UDF is not defined appeared. I think this because FB first tries to restore table and only then restore UDFs from backup. Just yesterday had downloaded RC1 build 608 and will check this problem against it. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-24 01:51 Message: Logged In: YES user_id=346895 I renamed my udflib (from MERS) to ib_udf and recreate the functions and it still doesn't works. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-23 04:02 Message: Logged In: YES user_id=346895 It's happening to me, too. My system is a RedHat 7.1 I was expecing to migrate all my clients to FB, but i coldn't do it now because of this. ---------------------------------------------------------------------- Comment By: Michael Gast (mgast) Date: 2001-11-22 23:15 Message: Logged In: YES user_id=382978 I try to use the MERS UDF library. The file is named 'udflib'. There is no prefix and no extension. It is an ELF library compiled with GCC(egcs-2.91.66 from 03/14/1999). I used this library with all former versions of Interbase 6 and Firebird for the last two years. Only RC1 does not find the entry points within the module. The standard UDF library can be used. As both libraries are in the same directory, it cannot ne a problem of the UDF path. ---------------------------------------------------------------------- Comment By: Mark ODonohue (skywalker) Date: 2001-11-22 17:38 Message: Logged In: YES user_id=57768 The way linux/unix firebird loads ib_util, it will not find the library if it has a lib prefix or a .so extension. (This is fixed in fb2). The next unix install for fb1 will leave it as ib_util. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 |
|
From: <no...@so...> - 2001-11-25 20:09:29
|
Bugs item #484627, was opened at 2001-11-22 10:20 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 Category: Core Engine Group: Initial Bug Status: Open Resolution: None Priority: 5 Submitted By: Michael Gast (mgast) Assigned to: Nobody/Anonymous (nobody) Summary: UDF are not longer accessible Initial Comment: When i try to use an existing UDF i get the error message: function <FUNCTION_NAME> is not defined. The UDF library and all UDF definitions are working fine with prior Firebird releases except RC1. My Firebird installation is running under Suse Linux 7.1. ---------------------------------------------------------------------- >Comment By: Neil McCalden (nmcc) Date: 2001-11-25 12:09 Message: Logged In: YES user_id=37966 Can those reporting a problem specify if they are using classic or super server. Also can they try a dev/debug build of classic as it will give the error message from the dlopen eg: SQL> select str_len(city) from cities; /opt/interbase/UDF/FUNCLIB: undefined symbol: __setjmp Statement failed, SQLCODE = -104 invalid request BLR at offset 60 -function STR_LEN is not defined -module name or entrypoint could not be found UDF libraries are working on Linux Redhat 6.2 (and Solaris) for me from queries. The backup/restore problem appears to be a duplicate of bug 429594 ---------------------------------------------------------------------- Comment By: Frank Schlottmann-Goedde (fsg) Date: 2001-11-25 11:48 Message: Logged In: YES user_id=70223 I have tested udflib (dated march 13 2000) returns 1.2 whith "select ver() from ..." and it works with LI-T1.0.0.608. Note that substr is an internal function now and you should replace the substr declaration with mer_substr (as has been done with the day, time etc. functions) try to run udfrem.sql on your db, and redeclare the functions you need. I don't thimk that this is a bug. fsg ---------------------------------------------------------------------- Comment By: Andrei Kireev (andreik) Date: 2001-11-25 10:19 Message: Logged In: YES user_id=62876 I also had similar problem with RC1 build 557. I had a table with calculated field which uses UDF and during restore the error message UDF is not defined appeared. I think this because FB first tries to restore table and only then restore UDFs from backup. Just yesterday had downloaded RC1 build 608 and will check this problem against it. ---------------------------------------------------------------------- Comment By: Andrei Kireev (andreik) Date: 2001-11-25 10:11 Message: Logged In: YES user_id=62876 I also had similar problem with RC1 build 557. I had a table with calculated field which uses UDF and during restore the error message UDF is not defined appeared. I think this because FB first tries to restore table and only then restore UDFs from backup. Just yesterday had downloaded RC1 build 608 and will check this problem against it. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-24 01:51 Message: Logged In: YES user_id=346895 I renamed my udflib (from MERS) to ib_udf and recreate the functions and it still doesn't works. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-23 04:02 Message: Logged In: YES user_id=346895 It's happening to me, too. My system is a RedHat 7.1 I was expecing to migrate all my clients to FB, but i coldn't do it now because of this. ---------------------------------------------------------------------- Comment By: Michael Gast (mgast) Date: 2001-11-22 23:15 Message: Logged In: YES user_id=382978 I try to use the MERS UDF library. The file is named 'udflib'. There is no prefix and no extension. It is an ELF library compiled with GCC(egcs-2.91.66 from 03/14/1999). I used this library with all former versions of Interbase 6 and Firebird for the last two years. Only RC1 does not find the entry points within the module. The standard UDF library can be used. As both libraries are in the same directory, it cannot ne a problem of the UDF path. ---------------------------------------------------------------------- Comment By: Mark ODonohue (skywalker) Date: 2001-11-22 17:38 Message: Logged In: YES user_id=57768 The way linux/unix firebird loads ib_util, it will not find the library if it has a lib prefix or a .so extension. (This is fixed in fb2). The next unix install for fb1 will leave it as ib_util. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 |
|
From: <no...@so...> - 2001-11-26 12:51:47
|
Bugs item #484627, was opened at 2001-11-22 10:20 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 Category: Core Engine Group: Initial Bug Status: Open Resolution: None Priority: 5 Submitted By: Michael Gast (mgast) Assigned to: Nobody/Anonymous (nobody) Summary: UDF are not longer accessible Initial Comment: When i try to use an existing UDF i get the error message: function <FUNCTION_NAME> is not defined. The UDF library and all UDF definitions are working fine with prior Firebird releases except RC1. My Firebird installation is running under Suse Linux 7.1. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-26 04:51 Message: Logged In: YES user_id=346895 My system: Linux Redhat 7.1 Firebird 1.0 RC1 (superserver) UDF library: udflib (from MERS) UDF path and name: /opt/interbase/UDF/udflib permissions: u=rwx,g=rx,o=rx I'm declaring just one function: DECLARE EXTERNAL FUNCTION vcharadd CSTRING(255), CSTRING(255) RETURNS CSTRING(255) ENTRY_POINT 'fn_strcat' MODULE_NAME 'udflib'; --- select vcharadd('a', 'a') from rdb$database; function <FUNCTION_NAME> is not defined. But i know this function is there, because it works fine with Interbase 6.0.1. I tried to rename the file 'udflib' to 'test' and it still doesn't works. ---------------------------------------------------------------------- Comment By: Neil McCalden (nmcc) Date: 2001-11-25 12:09 Message: Logged In: YES user_id=37966 Can those reporting a problem specify if they are using classic or super server. Also can they try a dev/debug build of classic as it will give the error message from the dlopen eg: SQL> select str_len(city) from cities; /opt/interbase/UDF/FUNCLIB: undefined symbol: __setjmp Statement failed, SQLCODE = -104 invalid request BLR at offset 60 -function STR_LEN is not defined -module name or entrypoint could not be found UDF libraries are working on Linux Redhat 6.2 (and Solaris) for me from queries. The backup/restore problem appears to be a duplicate of bug 429594 ---------------------------------------------------------------------- Comment By: Frank Schlottmann-Goedde (fsg) Date: 2001-11-25 11:48 Message: Logged In: YES user_id=70223 I have tested udflib (dated march 13 2000) returns 1.2 whith "select ver() from ..." and it works with LI-T1.0.0.608. Note that substr is an internal function now and you should replace the substr declaration with mer_substr (as has been done with the day, time etc. functions) try to run udfrem.sql on your db, and redeclare the functions you need. I don't thimk that this is a bug. fsg ---------------------------------------------------------------------- Comment By: Andrei Kireev (andreik) Date: 2001-11-25 10:19 Message: Logged In: YES user_id=62876 I also had similar problem with RC1 build 557. I had a table with calculated field which uses UDF and during restore the error message UDF is not defined appeared. I think this because FB first tries to restore table and only then restore UDFs from backup. Just yesterday had downloaded RC1 build 608 and will check this problem against it. ---------------------------------------------------------------------- Comment By: Andrei Kireev (andreik) Date: 2001-11-25 10:11 Message: Logged In: YES user_id=62876 I also had similar problem with RC1 build 557. I had a table with calculated field which uses UDF and during restore the error message UDF is not defined appeared. I think this because FB first tries to restore table and only then restore UDFs from backup. Just yesterday had downloaded RC1 build 608 and will check this problem against it. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-24 01:51 Message: Logged In: YES user_id=346895 I renamed my udflib (from MERS) to ib_udf and recreate the functions and it still doesn't works. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-23 04:02 Message: Logged In: YES user_id=346895 It's happening to me, too. My system is a RedHat 7.1 I was expecing to migrate all my clients to FB, but i coldn't do it now because of this. ---------------------------------------------------------------------- Comment By: Michael Gast (mgast) Date: 2001-11-22 23:15 Message: Logged In: YES user_id=382978 I try to use the MERS UDF library. The file is named 'udflib'. There is no prefix and no extension. It is an ELF library compiled with GCC(egcs-2.91.66 from 03/14/1999). I used this library with all former versions of Interbase 6 and Firebird for the last two years. Only RC1 does not find the entry points within the module. The standard UDF library can be used. As both libraries are in the same directory, it cannot ne a problem of the UDF path. ---------------------------------------------------------------------- Comment By: Mark ODonohue (skywalker) Date: 2001-11-22 17:38 Message: Logged In: YES user_id=57768 The way linux/unix firebird loads ib_util, it will not find the library if it has a lib prefix or a .so extension. (This is fixed in fb2). The next unix install for fb1 will leave it as ib_util. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 |
|
From: <no...@so...> - 2001-12-22 14:05:37
|
Bugs item #484627, was opened at 2001-11-22 10:20 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 Category: Core Engine Group: Initial Bug Status: Open Resolution: None Priority: 5 Submitted By: Michael Gast (mgast) Assigned to: Nobody/Anonymous (nobody) Summary: UDF are not longer accessible Initial Comment: When i try to use an existing UDF i get the error message: function <FUNCTION_NAME> is not defined. The UDF library and all UDF definitions are working fine with prior Firebird releases except RC1. My Firebird installation is running under Suse Linux 7.1. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-12-22 06:05 Message: Logged In: YES user_id=346895 udflib functions are now working with Firebird RC2 for me. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-26 04:51 Message: Logged In: YES user_id=346895 My system: Linux Redhat 7.1 Firebird 1.0 RC1 (superserver) UDF library: udflib (from MERS) UDF path and name: /opt/interbase/UDF/udflib permissions: u=rwx,g=rx,o=rx I'm declaring just one function: DECLARE EXTERNAL FUNCTION vcharadd CSTRING(255), CSTRING(255) RETURNS CSTRING(255) ENTRY_POINT 'fn_strcat' MODULE_NAME 'udflib'; --- select vcharadd('a', 'a') from rdb$database; function <FUNCTION_NAME> is not defined. But i know this function is there, because it works fine with Interbase 6.0.1. I tried to rename the file 'udflib' to 'test' and it still doesn't works. ---------------------------------------------------------------------- Comment By: Neil McCalden (nmcc) Date: 2001-11-25 12:09 Message: Logged In: YES user_id=37966 Can those reporting a problem specify if they are using classic or super server. Also can they try a dev/debug build of classic as it will give the error message from the dlopen eg: SQL> select str_len(city) from cities; /opt/interbase/UDF/FUNCLIB: undefined symbol: __setjmp Statement failed, SQLCODE = -104 invalid request BLR at offset 60 -function STR_LEN is not defined -module name or entrypoint could not be found UDF libraries are working on Linux Redhat 6.2 (and Solaris) for me from queries. The backup/restore problem appears to be a duplicate of bug 429594 ---------------------------------------------------------------------- Comment By: Frank Schlottmann-Goedde (fsg) Date: 2001-11-25 11:48 Message: Logged In: YES user_id=70223 I have tested udflib (dated march 13 2000) returns 1.2 whith "select ver() from ..." and it works with LI-T1.0.0.608. Note that substr is an internal function now and you should replace the substr declaration with mer_substr (as has been done with the day, time etc. functions) try to run udfrem.sql on your db, and redeclare the functions you need. I don't thimk that this is a bug. fsg ---------------------------------------------------------------------- Comment By: Andrei Kireev (andreik) Date: 2001-11-25 10:19 Message: Logged In: YES user_id=62876 I also had similar problem with RC1 build 557. I had a table with calculated field which uses UDF and during restore the error message UDF is not defined appeared. I think this because FB first tries to restore table and only then restore UDFs from backup. Just yesterday had downloaded RC1 build 608 and will check this problem against it. ---------------------------------------------------------------------- Comment By: Andrei Kireev (andreik) Date: 2001-11-25 10:11 Message: Logged In: YES user_id=62876 I also had similar problem with RC1 build 557. I had a table with calculated field which uses UDF and during restore the error message UDF is not defined appeared. I think this because FB first tries to restore table and only then restore UDFs from backup. Just yesterday had downloaded RC1 build 608 and will check this problem against it. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-24 01:51 Message: Logged In: YES user_id=346895 I renamed my udflib (from MERS) to ib_udf and recreate the functions and it still doesn't works. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-23 04:02 Message: Logged In: YES user_id=346895 It's happening to me, too. My system is a RedHat 7.1 I was expecing to migrate all my clients to FB, but i coldn't do it now because of this. ---------------------------------------------------------------------- Comment By: Michael Gast (mgast) Date: 2001-11-22 23:15 Message: Logged In: YES user_id=382978 I try to use the MERS UDF library. The file is named 'udflib'. There is no prefix and no extension. It is an ELF library compiled with GCC(egcs-2.91.66 from 03/14/1999). I used this library with all former versions of Interbase 6 and Firebird for the last two years. Only RC1 does not find the entry points within the module. The standard UDF library can be used. As both libraries are in the same directory, it cannot ne a problem of the UDF path. ---------------------------------------------------------------------- Comment By: Mark ODonohue (skywalker) Date: 2001-11-22 17:38 Message: Logged In: YES user_id=57768 The way linux/unix firebird loads ib_util, it will not find the library if it has a lib prefix or a .so extension. (This is fixed in fb2). The next unix install for fb1 will leave it as ib_util. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 |
|
From: <no...@so...> - 2001-12-27 15:23:43
|
Bugs item #484627, was opened at 2001-11-22 10:20 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 Category: Core Engine >Group: Fixed v1.0 >Status: Closed >Resolution: Fixed Priority: 5 Submitted By: Michael Gast (mgast) Assigned to: Nobody/Anonymous (nobody) Summary: UDF are not longer accessible Initial Comment: When i try to use an existing UDF i get the error message: function <FUNCTION_NAME> is not defined. The UDF library and all UDF definitions are working fine with prior Firebird releases except RC1. My Firebird installation is running under Suse Linux 7.1. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-12-22 06:05 Message: Logged In: YES user_id=346895 udflib functions are now working with Firebird RC2 for me. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-26 04:51 Message: Logged In: YES user_id=346895 My system: Linux Redhat 7.1 Firebird 1.0 RC1 (superserver) UDF library: udflib (from MERS) UDF path and name: /opt/interbase/UDF/udflib permissions: u=rwx,g=rx,o=rx I'm declaring just one function: DECLARE EXTERNAL FUNCTION vcharadd CSTRING(255), CSTRING(255) RETURNS CSTRING(255) ENTRY_POINT 'fn_strcat' MODULE_NAME 'udflib'; --- select vcharadd('a', 'a') from rdb$database; function <FUNCTION_NAME> is not defined. But i know this function is there, because it works fine with Interbase 6.0.1. I tried to rename the file 'udflib' to 'test' and it still doesn't works. ---------------------------------------------------------------------- Comment By: Neil McCalden (nmcc) Date: 2001-11-25 12:09 Message: Logged In: YES user_id=37966 Can those reporting a problem specify if they are using classic or super server. Also can they try a dev/debug build of classic as it will give the error message from the dlopen eg: SQL> select str_len(city) from cities; /opt/interbase/UDF/FUNCLIB: undefined symbol: __setjmp Statement failed, SQLCODE = -104 invalid request BLR at offset 60 -function STR_LEN is not defined -module name or entrypoint could not be found UDF libraries are working on Linux Redhat 6.2 (and Solaris) for me from queries. The backup/restore problem appears to be a duplicate of bug 429594 ---------------------------------------------------------------------- Comment By: Frank Schlottmann-Goedde (fsg) Date: 2001-11-25 11:48 Message: Logged In: YES user_id=70223 I have tested udflib (dated march 13 2000) returns 1.2 whith "select ver() from ..." and it works with LI-T1.0.0.608. Note that substr is an internal function now and you should replace the substr declaration with mer_substr (as has been done with the day, time etc. functions) try to run udfrem.sql on your db, and redeclare the functions you need. I don't thimk that this is a bug. fsg ---------------------------------------------------------------------- Comment By: Andrei Kireev (andreik) Date: 2001-11-25 10:19 Message: Logged In: YES user_id=62876 I also had similar problem with RC1 build 557. I had a table with calculated field which uses UDF and during restore the error message UDF is not defined appeared. I think this because FB first tries to restore table and only then restore UDFs from backup. Just yesterday had downloaded RC1 build 608 and will check this problem against it. ---------------------------------------------------------------------- Comment By: Andrei Kireev (andreik) Date: 2001-11-25 10:11 Message: Logged In: YES user_id=62876 I also had similar problem with RC1 build 557. I had a table with calculated field which uses UDF and during restore the error message UDF is not defined appeared. I think this because FB first tries to restore table and only then restore UDFs from backup. Just yesterday had downloaded RC1 build 608 and will check this problem against it. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-24 01:51 Message: Logged In: YES user_id=346895 I renamed my udflib (from MERS) to ib_udf and recreate the functions and it still doesn't works. ---------------------------------------------------------------------- Comment By: Fabiano Bonin (fabianobonin) Date: 2001-11-23 04:02 Message: Logged In: YES user_id=346895 It's happening to me, too. My system is a RedHat 7.1 I was expecing to migrate all my clients to FB, but i coldn't do it now because of this. ---------------------------------------------------------------------- Comment By: Michael Gast (mgast) Date: 2001-11-22 23:15 Message: Logged In: YES user_id=382978 I try to use the MERS UDF library. The file is named 'udflib'. There is no prefix and no extension. It is an ELF library compiled with GCC(egcs-2.91.66 from 03/14/1999). I used this library with all former versions of Interbase 6 and Firebird for the last two years. Only RC1 does not find the entry points within the module. The standard UDF library can be used. As both libraries are in the same directory, it cannot ne a problem of the UDF path. ---------------------------------------------------------------------- Comment By: Mark ODonohue (skywalker) Date: 2001-11-22 17:38 Message: Logged In: YES user_id=57768 The way linux/unix firebird loads ib_util, it will not find the library if it has a lib prefix or a .so extension. (This is fixed in fb2). The next unix install for fb1 will leave it as ib_util. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028 |
|
From: Randal W. C. <wa...@xw...> - 2001-11-29 22:58:16
|
Hi,
I think this is not a real bug, its just a missing link.
If you do a ldd on udflib you will find this (I renamed mine udflib.mers,
but this is because I have another lib named same)...by the way you will
have the same issue with FreeUDFLib or another one that ldd finds problems
with.
root@www2:/opt/interbase/UDF# ldd udflib.mers
libm.so.6 => /lib/libm.so.6 (0x40038000)
libgds.so.0 => not found
libc.so.6 => /lib/libc.so.6 (0x4005a000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x80000000)
As you ca see libgds.so.0 is not found...
root@www2:/opt/interbase/UDF# ls -l /usr/lib/libgds*
lrwxrwxrwx 1 root root 35 Nov 20 17:12 /usr/lib/libgds.so
-> ..
/../opt/interbase/lib/libgds.so.0
r
Seems the link is not installed by the installer anymore...maybe it should
be
So make a link and do ldconfig
root@www2:/opt/interbase/UDF# ln -s /usr/lib/libgds.so /usr/lib/libgds.so.0
root@www2:/opt/interbase/UDF# ldconfig
At this point you should see a different story with ldd
root@www2:/opt/interbase/UDF# ldd udflib.mers
libm.so.6 => /lib/libm.so.6 (0x40038000)
libgds.so.0 => /usr/lib/libgds.so.0 (0x4005a000)
libc.so.6 => /lib/libc.so.6 (0x400ad000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x80000000)
root@www2:/opt/interbase/UDF#
No errors, your library should work now, but I have not verified that
particular one but it made others happy.
Randal Carpenter
wa...@xw...
On Thu, 22 Nov 2001 no...@so... wrote:
> Bugs item #484627, was opened at 2001-11-22 10:20
> You can respond by visiting:
> http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028
>
> Category: Core Engine
> Group: Initial Bug
> Status: Open
> Resolution: None
> Priority: 5
> Submitted By: Michael Gast (mgast)
> Assigned to: Nobody/Anonymous (nobody)
> Summary: UDF are not longer accessible
>
> Initial Comment:
> When i try to use an existing UDF i get the error message:
>
> function <FUNCTION_NAME> is not defined.
>
> The UDF library and all UDF definitions are working
> fine with prior Firebird releases except RC1.
>
> My Firebird installation is running under Suse Linux 7.1.
>
>
>
> ----------------------------------------------------------------------
>
> You can respond by visiting:
> http://sourceforge.net/tracker/?func=detail&atid=109028&aid=484627&group_id=9028
>
> _______________________________________________
> Firebird-devel mailing list
> Fir...@li...
> https://lists.sourceforge.net/lists/listinfo/firebird-devel
>
|
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X