Menu
▾
▴
Re: [Fetchmail-users] The daemon runs (seen in top) but never tries to connect
|
From: Ian B. <an...@fa...> - 2014-11-02 15:29:32
|
Jerry, hi, see lower down On Sun, Nov 02, 2014 at 10:03:49AM -0500, Jerry wrote: > On Sun, 2 Nov 2014 15:40:39 +0200, Ian Balchin stated: > > > Hi, > > > > I have fetchmail running on other machines with no issues. > > > > On new FreeBSD server (my first ever) I have the fetchmail daemon running > > but although showing in the maillog it does not actually run. It never > > wakes up and fetches any mail. > > > > The output from it run as 'fetchmail -V -v --nodetach --nosyslog' is pasted > > below > > > > The last line in maillog is: > > > > Nov 2 14:21:00 myserver fetchmail[4581]: starting fetchmail 6.3.26 daemon > > > > and there we sit. > > > > If run as 'fetchmail -vvv --nodetach --nosyslog' it works fine. > > > > I copied fetchmailrc out from /usr/local/etc to my home directory and > > renamed it .fetchmailrc and then edited accordingly. User = me, group = > > fetchmail. I added me to the fetchmail group with no change in operation. > > > > Am using Postfix. > > > > ------------------------------ > > # i have edited out my domain, my isp, my passwd so hope that hasn't > > fouled it up below > > > > This is fetchmail release 6.3.26+GSS+RPA+SDPS+SSL+OPIE+NLS. > > > > Copyright (C) 2002, 2003 Eric S. Raymond > > Copyright (C) 2004 Matthias Andree, Eric S. Raymond, > > Robert M. Funk, Graham Wilson > > Copyright (C) 2005 - 2012 Sunil Shetye > > Copyright (C) 2005 - 2013 Matthias Andree > > Fetchmail comes with ABSOLUTELY NO WARRANTY. This is free software, and you > > are welcome to redistribute it under certain conditions. For details, > > please see the file COPYING in the source or documentation directory. > > This product includes software developed by the OpenSSL Project > > for use in the OpenSSL Toolkit. (http://www.openssl.org/) > > > > Fallback MDA: (none) > > FreeBSD hestia.mydomain 10.0-RELEASE FreeBSD 10.0-RELEASE #0 r260789: Fri > > Jan 17 01:46:25 UTC 2014 > > ro...@sn...:/usr/obj/usr/src/sys/GENERIC i386 Taking options > > from command line and /home/nignog/.fetchmailrc Poll interval is 600 > > seconds Idfile is /home/inksi/.fetchids Fetchmail will forward misaddressed > > multidrop messages to inksi. Fetchmail will direct error mail to the sender. > > Fetchmail will treat permanent errors as temporary (keep messages). > > Options for retrieving from nignog@myd...@po...: > > True name of server is pop3.gormless.com > > This host will be queried when no host is specified. > > Password = "uncrackable". > > Protocol is POP3 (using default port). > > All available authentication methods will be tried. > > SSL protocol: ssl23. > > Server nonresponse timeout is 300 seconds (default). > > Default mailbox selected. > > All messages will be retrieved (--all on). > > Fetched messages will not be kept on the server (--keep off). > > Old messages will not be flushed before message retrieval (--flush off). > > Oversized messages will not be flushed before message retrieval > > (--limitflush off). Rewrite of server-local addresses is enabled > > (--norewrite off). Carriage-return stripping is disabled (stripcr off). > > Carriage-return forcing is disabled (forcecr off). > > Interpretation of Content-Transfer-Encoding is enabled (pass8bits off). > > MIME decoding is disabled (mimedecode off). > > Idle after poll is disabled (idle off). > > Nonempty Status lines will be kept (dropstatus off) > > Delivered-To lines will be kept (dropdelivered off) > > No received-message limit (--fetchlimit 0). > > Fetch message size limit is 100 (--fetchsizelimit 100). > > Do binary search of UIDs during 3 out of 4 polls (--fastuidl 4). > > No SMTP message batch limit (--batchlimit 0). > > No forced expunges (--expunge 0). > > Messages will be SMTP-forwarded to: localhost (defaultt) > > Spam-blocking disabled > > No pre-connection command. > > No post-connection command. > > Single-drop mode: 1 local name recognized. > > nignog > > No interface requirement specified. > > No monitor interface specified. > > No plugin command specified. > > No plugout command specified. > > No UIDs saved from this host. > > No poll trace information will be added to the Received header. > > Messages with bad headers will be rejected. > > > > ------------------------ > > > > I am in violation of all multipdrop recommendations but haven't got that > > far yet. > > > > thanks for any pointers (any additional info supplied on request). > > Ian > > How was "fetchmail" installed; ie, from the FreeBSD ports system or did you > download and install it from source? I installed from the ports system, (twice, I deinstalled and tried to see if I could install as user but not possible). Ian > > -- > Jerry > > ------------------------------------------------------------------------------ > _______________________________________________ > Fetchmail-users mailing list > Fet...@li... > https://lists.sourceforge.net/lists/listinfo/fetchmail-users |
