feapi-discussion

[Feapi] 1.0 release

[alexander l. <le...@zp...>]

Hey,

I thought it was finally time to release the src and binaries as 1.0.
>From what I hear, Remy won't have the time to maintain the Mac-version
any more (am I correct, Remy?), so I just released the windows binaries.

I never understood this sf.net release system really, so perhaps this
could have been done better, I don't know.

Anyway, it had to be released some time, and I suddenly felt a short
wave of enthusiasm to do it :-D


Cheers,
(a)

-- 
dipl. ing.
alexander lerch

zplane.development
:www.zplane.de
katzbachstr.21
d-10965 berlin

fon: +49.30.854 09 15.0
fax: +49.30.854 09 15.5

Re: [Feapi] 1.0 release

[remy m. <Rem...@ir...>]

alexander lerch wrote:
> Hey,
> 
> I thought it was finally time to release the src and binaries as 1.0.
>>From what I hear, Remy won't have the time to maintain the Mac-version
> any more (am I correct, Remy?), so I just released the windows binaries.

Yes I don't have much time left, but I should manage to pack together a 
bunch of feapi plugin all together by the end of this month.

> I never understood this sf.net release system really, so perhaps this
> could have been done better, I don't know.

The weird thing is about version numbers:

we have
FEAPI        FEAPI.1.0.src.zip             September 11, 2007  	
FEAPI-1.0    FEAPI1.0-rc1_Win32.src.zip    June 20, 2005 	

maybe we should use rc4/rc5 or 1.1 or switch to 2.0, any suggestions?

> Anyway, it had to be released some time, and I suddenly felt a short
> wave of enthusiasm to do it :-D

Yes thanks for doing it.

Re: [Feapi] 1.0 release

[alexander l. <le...@zp...>]

Hi Remy,

remy muller wrote:
> The weird thing is about version numbers:
> 
> we have
> FEAPI        FEAPI.1.0.src.zip             September 11, 2007  	
> FEAPI-1.0    FEAPI1.0-rc1_Win32.src.zip    June 20, 2005 	

Ahh great so I screwed up totally. The initial state was
FEAPI	       FEAPI1.0-rc1_Win32.src.zip    June 20, 2005

then I wondered what a package and what a release is and created the
FEAPI-1.0 package. By then I realized that was stupid and tried to merge
these two packages by renaming both the FEAPI, without result of course,
and then renamed the wrong of them. Sigh. Probably shouldn't post how
stupid I am, should I?

Anyway I changed the package names now to FEAPI-1.0 and FEAPI-1.0rc1,
that should be ok.

Cheers,
(a)

-- 
dipl. ing.
alexander lerch

zplane.development
:www.zplane.de
katzbachstr.21
d-10965 berlin

fon: +49.30.854 09 15.0
fax: +49.30.854 09 15.5

Re: [Feapi] 1.0 release

[Koen T. <koe...@ug...>]

Hi all,
good to see some activity here :-)
I'm actually at DAFx at the moment, where the original paper was first =20
published by Alex.
I saw Gunnar has a paper here, but apperently he's not on the =20
registration list, so I won't be able to meet him.
Remy, there's also a guy from IRCAM here who claims to know you =20
(someone with Iranian roots, and coming from San Diego, Arshia I =20
believe?)
Nothing more to say though, just letting you guys know.
Best,
Koen

PS
As you may have noticed, that graphic designer I contacted didn't find =20
the time to make some logo/web design...

Quoting alexander lerch <le...@zp...>:

> Hi Remy,
>
> remy muller wrote:
>> The weird thing is about version numbers:
>>
>> we have
>> FEAPI        FEAPI.1.0.src.zip             September 11, 2007
>> FEAPI-1.0    FEAPI1.0-rc1_Win32.src.zip    June 20, 2005
>
> Ahh great so I screwed up totally. The initial state was
> FEAPI=09       FEAPI1.0-rc1_Win32.src.zip    June 20, 2005
>
> then I wondered what a package and what a release is and created the
> FEAPI-1.0 package. By then I realized that was stupid and tried to merge
> these two packages by renaming both the FEAPI, without result of course,
> and then renamed the wrong of them. Sigh. Probably shouldn't post how
> stupid I am, should I?
>
> Anyway I changed the package names now to FEAPI-1.0 and FEAPI-1.0rc1,
> that should be ok.
>
> Cheers,
> (a)
>
> --
> dipl. ing.
> alexander lerch
>
> zplane.development
> :www.zplane.de
> katzbachstr.21
> d-10965 berlin
>
> fon: +49.30.854 09 15.0
> fax: +49.30.854 09 15.5
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Feapi-discussion mailing list
> Fea...@li...
> https://lists.sourceforge.net/lists/listinfo/feapi-discussion
>

Re: [Feapi] 1.0 release

[Gualtiero V. <Gua...@un...>]

> good to see some activity here :-)

Yeah, very good news indeed :-)
Thanks to Alex and to all for the excellent work!

> I'm actually at DAFx at the moment, where the original paper was first
> published by Alex.

Good, you might try to do some dissemination activity there ;-)
Enjoy the conference!

All the best,
Gualtiero

Re: [Feapi] 1.0 release

[remy m. <Rem...@ir...>]

Koen Tanghe wrote:
> Remy, there's also a guy from IRCAM here who claims to know you  
> (someone with Iranian roots, and coming from San Diego, Arshia I  
> believe?)

Yes, he's a very good friend of mine.

Alexander:
I've seen how other sf projects works, and I think we should have only 
one package named FEAPI with several versions attached to it, and for 
each version several files (src, win32, mac...)

see for example:
http://sourceforge.net/project/showfiles.php?group_id=100127


later on we may want to have other packages like a FEAPI Host for example.

I can see If I succeed in making the changes if you want.

Re: [Feapi] 1.0 release

[alexander l. <le...@zp...>]

remy muller wrote:
> Koen Tanghe wrote:
>> Remy, there's also a guy from IRCAM here who claims to know you  
>> (someone with Iranian roots, and coming from San Diego, Arshia I  
>> believe?)
> 
> Yes, he's a very good friend of mine.

Right, I met him at last years ISMIR. He is into score following, isn't he?

> Alexander:
> I've seen how other sf projects works, and I think we should have only 
> one package named FEAPI with several versions attached to it, and for 
> each version several files (src, win32, mac...)
> 
> see for example:
> http://sourceforge.net/project/showfiles.php?group_id=100127
> 
> 
> later on we may want to have other packages like a FEAPI Host for example.
> 
> I can see If I succeed in making the changes if you want.

That would be perfectly fine with me. I think now I understand the
package/release/filename struture. Anyway, I am sure I will have
struggle again when I am going to publish something the next time :-/

Cheers,
(a)

-- 
dipl. ing.
alexander lerch

zplane.development
:www.zplane.de
katzbachstr.21
d-10965 berlin

fon: +49.30.854 09 15.0
fax: +49.30.854 09 15.5

Re: [Feapi] 1.0 release

[remy m. <Rem...@ir...>]

alexander lerch wrote:
>>Yes, he's a very good friend of mine.
> 
> Right, I met him at last years ISMIR. He is into score following, isn't he?

yes, but not only that.
http://cosmal.ucsd.edu/arshia/

> That would be perfectly fine with me. I think now I understand the
> package/release/filename struture. Anyway, I am sure I will have
> struggle again when I am going to publish something the next time :-/

ok then I'll have a look

Re: [Feapi] 1.0 release

[remy m. <Rem...@ir...>]

alexander lerch wrote:
> That would be perfectly fine with me. I think now I understand the
> package/release/filename struture. Anyway, I am sure I will have
> struggle again when I am going to publish something the next time :-/

Ok It's done:
http://sourceforge.net/project/showfiles.php?group_id=132274

The web interface was really tedious to use.

I've disabled older packages/release (It seems it's not possible to 
delete them) and re uploaded everything from scratch under the FEAPI 
package with releases 1.0-RC1 (2005) and 1.0 (2007)

Re: [Feapi] 1.0 release

[alexander l. <le...@zp...>]

Great, thanks!

Best,
Alexander

remy muller wrote:
> alexander lerch wrote:
>> That would be perfectly fine with me. I think now I understand the
>> package/release/filename struture. Anyway, I am sure I will have
>> struggle again when I am going to publish something the next time :-/
> 
> Ok It's done:
> http://sourceforge.net/project/showfiles.php?group_id=132274
> 
> The web interface was really tedious to use.
> 
> I've disabled older packages/release (It seems it's not possible to 
> delete them) and re uploaded everything from scratch under the FEAPI 
> package with releases 1.0-RC1 (2005) and 1.0 (2007)

-- 
dipl. ing.
alexander lerch

zplane.development
:www.zplane.de
katzbachstr.21
d-10965 berlin

fon: +49.30.854 09 15.0
fax: +49.30.854 09 15.5

Re: [Feapi] 1.0 release

[Gunnar E. <eis...@nu...>]

Hi there,
thank you Alex, that you took the time to pack everything together for the
release.
Koen, unfortunately I couldn't attend this years DAFx and I am really sorry
that I have missed it. I belive you had a lot of fun in Bordeaux and the
sessions were really interesting.
At the moment and for the next couple of weeks I am in Italy near Verona and
it is quite hard to get internet access here. So I don't know when this mail
will be delivered - we'll see.
Best,
Gunnar

-----Ursprungliche Nachricht-----
Von: fea...@li...
[mailto:fea...@li...]Im Auftrag von
Koen Tanghe
Gesendet: Dienstag, 11. September 2007 16:09
An: audio feature extraction plugin API discussion; alexander lerch
Betreff: Re: [Feapi] 1.0 release


Hi all,
good to see some activity here :-)
I'm actually at DAFx at the moment, where the original paper was first
published by Alex.
I saw Gunnar has a paper here, but apperently he's not on the
registration list, so I won't be able to meet him.
Remy, there's also a guy from IRCAM here who claims to know you
(someone with Iranian roots, and coming from San Diego, Arshia I
believe?)
Nothing more to say though, just letting you guys know.
Best,
Koen

PS
As you may have noticed, that graphic designer I contacted didn't find
the time to make some logo/web design...

Quoting alexander lerch <le...@zp...>:

> Hi Remy,
>
> remy muller wrote:
>> The weird thing is about version numbers:
>>
>> we have
>> FEAPI        FEAPI.1.0.src.zip             September 11, 2007
>> FEAPI-1.0    FEAPI1.0-rc1_Win32.src.zip    June 20, 2005
>
> Ahh great so I screwed up totally. The initial state was
> FEAPI	       FEAPI1.0-rc1_Win32.src.zip    June 20, 2005
>
> then I wondered what a package and what a release is and created the
> FEAPI-1.0 package. By then I realized that was stupid and tried to merge
> these two packages by renaming both the FEAPI, without result of course,
> and then renamed the wrong of them. Sigh. Probably shouldn't post how
> stupid I am, should I?
>
> Anyway I changed the package names now to FEAPI-1.0 and FEAPI-1.0rc1,
> that should be ok.
>
> Cheers,
> (a)
>
> --
> dipl. ing.
> alexander lerch
>
> zplane.development
> :www.zplane.de
> katzbachstr.21
> d-10965 berlin
>
> fon: +49.30.854 09 15.0
> fax: +49.30.854 09 15.5
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Feapi-discussion mailing list
> Fea...@li...
> https://lists.sourceforge.net/lists/listinfo/feapi-discussion
>


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Feapi-discussion mailing list
Fea...@li...
https://lists.sourceforge.net/lists/listinfo/feapi-discussion