[Etherboot-developers] Wireless [D-LINK 520] problems

[Boris R. <bo...@th...>]

I purchased the D-Link DWL-520 and a Linksys Wireless AP/Cable/dsl router and it somewhat works. I am having problems with the following.

1) I can't seem to put the Prism2 drivers into my award bios. I have done it with the realtek 8139 drivers and put it on the bios on the same computer and it works flawless. The prism drivers wont boot at all if I put it into the bios. Is their another way to have the DLink cards booting up without having an image into the bios?

2) It starts loading the image but it seems after about 20+mbs of loading, The following errors occur and it wont recover. I have to hit the ESCAPE key and then it trys reloading the image again but does the same thing over and over but at different spots. Here are the errors.

Hfa384x: Tx FID allocate command failed: Aborting Transmit.
Hfa384x: Tx FID allocate command failed: Aborting Transmit.
Copy_form_bap(0x0282,0x003c,86) failed. Result=0x403c
Copy_form_bap(0x0282,0x003c,86) failed. Result=0x403c
Copy_form_bap(0x0282,0x003c,226) failed. Result=0x403c

Any ideas?