Re: [Etherboot-developers] Error in elf make for website

[Marty C. <md...@th...>]

On 4/13/2002 7:39 PM Gregg C Levine dr...@wo... wrote:
>Hello from Gregg C Levine
>Problems with making elf bootable images for two 3COM cards, the 3C509,
>and 3C905. I am placing here a cut & paste of the 3C509, and the 3C905
>make: *** No rule to make target `bin32/3c509.elf'.  Stop.
>make: Leaving directory `/tmp/ROMQkGW5W'

Gregg,  rom-o-matic.net supports what the underlying packages support.  
The .elf and .ebi formats are almost experimental right now.  Perhaps I 
should put an even stronger warning on those options.

>Marty this happened for these particular cards. I am also going to see
>if I can create a similar image for the LinuxBIOS project, for the 3c509
>That too failed with much the same error. Since the folks at the project
>have not announced support for those cards, it is my guess that is why
>we are getting those failures, but since there are more 3COM cards out
>there, then nearly every single brand made, except for Intel, they
>should be.

I don't think I can be of much help with this.  Perhaps you should 
correspond with the folks on the LinuxBIOS mailing list and see what they 
say.  

Marty

---
    Try: http://rom-o-matic.net/ to make Etherboot images instantly.

   Name: Marty Connor
US Mail: Entity Cyber, Inc.; P.O. Box 391827; Cambridge, MA 02139; USA
  Voice: (617) 491-6935, Fax: (617) 491-7046 
  Email: md...@th...
    Web: http://www.thinguin.org/