[Etherboot-developers] Error in elf make for website

[Gregg C L. <dr...@wo...>]

Hello from Gregg C Levine
Problems with making elf bootable images for two 3COM cards, the 3C509,
and 3C905. I am placing here a cut & paste of the 3C509, and the 3C905

3c509 Build Failed

------------------------------------------------------------------------
--------
Build failed. Status =3D 2.=20

Following is the output from make:=20


make: Entering directory `/tmp/ROMQkGW5W'
make: *** No rule to make target `bin32/3c509.elf'.  Stop.
make: Leaving directory `/tmp/ROMQkGW5W'
Please let us know that this happened.
(That was for the 3c509 type image, the 3c905 next)

3c905c-tpo Build Failed

------------------------------------------------------------------------
--------
Build failed. Status =3D 2.=20

Following is the output from make:=20


make: Entering directory `/tmp/ROMPNClfs'
make: *** No rule to make target `bin32/3c905c-tpo.elf'.  Stop.
make: Leaving directory `/tmp/ROMPNClfs'
Please let us know that this happened.

Marty this happened for these particular cards. I am also going to see
if I can create a similar image for the LinuxBIOS project, for the 3c509
That too failed with much the same error. Since the folks at the project
have not announced support for those cards, it is my guess that is why
we are getting those failures, but since there are more 3COM cards out
there, then nearly every single brand made, except for Intel, they
should be.
-------------------
Gregg C Levine dr...@wo...
------------------------------------------------------------
"The Force will be with you...Always." Obi-Wan Kenobi
"Use the Force, Luke."=A0 Obi-Wan Kenobi
(This company dedicates this E-Mail to General Obi-Wan Kenobi )
(This company dedicates this E-Mail to Master Yoda )