AW: AW: [Etherboot-developers] etherboot Ver. 4.7.23

[Volker S. <Vol...@da...>]

-----Urspr=FCngliche Nachricht-----
Von: Ken Yap [mailto:ke...@nl...]
Gesendet: Freitag, 13. April 2001 13:19
An: eth...@li...
Betreff: Re: AW: [Etherboot-developers] etherboot Ver. 4.7.23=20


>I think for the eepro100, it's one of the following reasons:

>1. You have a PnP conformant BIOS but you did not select the network
>device as a bootable device.=20

the BIOS from the MachZ is special for embedded computers and there is
no option for netboot
because there are options for flashboot, romboot, ramdiskboot....

after flashing i set a window with a min size of 16kbyte on the begin of
the etherboot-image in the flash and
than i set the window to a harwareadresse were the BIOS can find the
BIOS-extensions ( D800 )

at last is set the bootsuccsession but i haven't a other device and
that's it

>2. You do not have a PnP conformant BIOS.
i don't know

>The 82559er bug is a different issue not yet understood. My guess is a
>media selection issue.

the software init. the hardware right but the hardware don't work and i
think etherboot can't see that (init is ok) and send for ever a request.

cu
volker
______________________________________________
Etherboot-developers mailing list
Eth...@li...
http://lists.sourceforge.net/lists/listinfo/etherboot-developers