RE: [Etherboot-developers] Flashing EB in BIOS with CBROM
Brought to you by:
marty_connor,
stefanhajnoczi
|
From: Wolf, P. <Wo...@Ul...> - 2001-02-20 01:18:45
|
I was able to get EB working in the BIOS ROM, using CBROM124.exe I had = to load it at 4012:0000. That is were PXE was loaded in the BIOS. Thanks Ken and Christoph for your help. Paul -----Original Message----- From: Ken Yap [mailto:ke...@nl...] Sent: Thursday, February 15, 2001 9:44 PM To: eth...@li... Subject: Re: [Etherboot-developers] Flashing EB in BIOS with CBROM=20 |I am using 82559 EB, with Intel 810 chipset. I have everything working = on |Pro 100 Lan card with FLASH.=A0 I want to put EB in the BIOS flash so = I can |use the on board LAN controller but there is not enough room.=A0 Below = is |the original CBROM dump.=A0 I removed item 7. OEM0 CODE for 82559.026 = to |make space in the ROM.=A0 I flashed the new BIOS without the OEM0 and = it |works, then I put EB in 82559er.rom by following the Etherboot |suggestions on the web site, which are install as /PCI 82559er.rom |D000:0=A0 after flashing the BIOS is out-to-lunch no booting. Any = ideas? Try swapping the Device type IDs around in the ROM image using the swapdevids.pl script in 4.7.19 to see if it makes any difference. = (There is an ambiguity in the original spec.) Also dump the info in the OEM = and the Etherboot image using disrom.pl, also in 4.7.19, and compare the fields. _______________________________________________ Etherboot-developers mailing list Eth...@li... http://lists.sourceforge.net/lists/listinfo/etherboot-developers |