Re: [Etherboot-users] Bios 32 error while booting

[Nico O. <ni...@an...>]

Sorry. Don't know. I just download the zrom image from
rom-o-matic and then use DOS tools to add it to my ROM BIOS
and then flash it to the computer BIOS. Have not written it
to an eeprom so can't help.

Nico

>  Hello,
>          I had seen this option but where do i have to
> change this option 
>  while compiling from linux box.
>  
>         Thanks for reply.
>  
>  Regards,
>  Vinu
> > 
> >> Under the www.rom-o-matic.net Configure section there
> is an
> >> option that mentions your problem.
> >>
> >> CONFIG_PCI_DIRECT
> >>  Define this for PCI BIOSes that do not implement
> BIOS32
> >>  or not correctly. Normally not needed. Only works for
> >> BIOSes of a certain era.
> >>
> >>>                 I am using etherboot 5.2.6 and bulit
> >>>  .zrom image from my
> >>> linux box and wrote it in 27C512 eeprom, i written 3
> >>> eeproms and 2 of them are running on my 32bit
> computers
> >>> such as celeron 1.1ghz, PIII-1.13 but when i try to
> run
> >>> lan card with bootrom my my 64bit computer which is
> >>> having Intel 915 Orignal motherboard and P4 3.0 ghz
> 64bit
> >>> processor it gives error on all of the cards error is
> as
> >>> follows
> >>>
> >>> Probing Pci nic...
> >>>   Pci_init: no BIOS32 detected
> >>>   Probing isa nic...
> >>>   Probing PC disk
> >>>   <Sleep>
> >>>
> >>>             sorry for bad english.
> >>>             please reply it as soon as possible