|
From: Marty C. <md...@et...> - 2005-06-08 11:24:45
|
On Jun 8, 2005, at 6:17 AM, abhi wrote:
> hi
> =A0could some one tell me how to find pci id in windows or dos insted=20=
> of installing a full linux distro 'cause i do not have any disk space=20=
> to install it
> n then install lscpi
Check out the page:
http://www.idhw.com/textual/guide/inst_type_known_no.html
Look for the PCI program by Craig Hart. There is a DOS version and a=20
Windows version.
I use the DOS version, which I believe you can download at:
http://members.datafast.net.au/dft0802/downloads/pci.zip
It displays PCI IDs, subvendor information, and lots of other=20
information.
It also supports output redirection under DOS, so you can do:
C:\PCI> PCI > LOG.TXT
and get the output in LOG.TXT.
Here is some sample output:
--------------------
Craig Hart's PCI+AGP bus sniffer, version 0.41, freeware made in=20
1996-2000.
PCI BIOS Version 2.10 found!
Number of PCI Busses : 1
PCI Characteristics : Config Mechanism 1 Special Cycle Mechanism 1
Searching for PCI Devices using the System BIOS
Vendor 8086h Intel Corporation
Device 7100h 82439TX 430TX System Controller
Command 0006h (Memory Access, BusMaster)
Status 2200h (Received Master Abort, Medium Timing)
Revision 01h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST
Vendor 8086h Intel Corporation
Device 7110h 82371AB PIIX4 ISA Bridge
Command 000Fh (I/O Access, Memory Access, BusMaster, Special=20
Cycles)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 01h, Header Type 80h, Bus Latency 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to ISA
Vendor 8086h Intel Corporation
Device 7111h 82371AB/EB/MB PIIX4 EIDE Controller
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 01h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Storage, type IDE
PCI EIDE Controller Features :
BusMaster EIDE is supported
Primary Channel is at I/O Port 01F0h and IRQ 14
Secondary Channel is at I/O Port 0170h and IRQ 15
Address 4 is an I/O Port : 0000F000h
Vendor 8086h Intel Corporation
Device 7112h 82371AB/EB/MB PIIX4 USB Controller
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 01h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Address 4 is an I/O Port : 00006400h
System IRQ 11, INT# D
Vendor 8086h Intel Corporation
Device 7113h 82371AB PIIX4 Power Management Controller
Command 0003h (I/O Access, Memory Access)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 01h, Header Type 00h, Bus Latency 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to Other
Vendor 1002h ATI Technologies
Device 4752h Rage XL
Command 0087h (I/O Access, Memory Access, BusMaster, Wait Cycles)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,=20=
Medium Timing)
Revision 27h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Display, type VGA
Subsystem ID 80081002h Unknown
Subsystem Vendor 1002h ATI Technologies
Address 0 is a Memory Address (anywhere in 0-4Gb) : E0000000h
Address 1 is an I/O Port : 00006500h
Address 2 is a Memory Address (anywhere in 0-4Gb) : E1000000h
System IRQ 10, INT# A
Expansion ROM of 128Kb decoded by this card
New Capabilities List Information :
Power Management Capabilities
Supports Power state D2
Supports Power state D1
Supports reduced clock speed (when idle)
Current power state : D0
[ Here's what we're looking for ]
Vendor 10ECh Realtek Semiconductor
Device 8139h RT8139 (A/B/C/8130) Fast Ethernet Adapter
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,=20=
Medium Timing)
Revision 10h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Network, type Ethernet
Subsystem ID 813911F6h Unknown
Subsystem Vendor 11F6h Compex / Powermatic Data Systems Ltd
Address 0 is an I/O Port : 00006600h
Address 1 is a Memory Address (anywhere in 0-4Gb) : E1001000h
System IRQ 9, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports Power state D2
Supports Power state D1
Supports reduced clock speed (when idle)
Current power state : D0
ROM PCI IRQ routing table Windows 9x Compatibility Tests....
No ROM PCI IRQ routing table found!!!
IRQ Summary: IRQs 9,10,11,14,15 are used by PCI devices
Shared IRQs: There are no shared PCI IRQs
------------------
I hope this is helpful. Please let us know how things go.
Marty
P.S. Wiki material?
--=20
Try: http://rom-o-matic.net/ to make Etherboot images instantly.
Name: Marty Connor
US Mail: Entity Cyber, Inc.; P.O. Box 391827;
Cambridge, MA 02139; USA
Voice: (617) 491-6935; Fax: (617) 491-7046
Email: md...@et...
Web: http://www.etherboot.org/
|
