Re: [ES40-developers] tru64 boot probs

[Fausto S. <fa...@un...>]

Hello all,

latest update... this is the big crash :-) with full SCSI config.

Creating the root file system on device dsk0a
panic (cpu 0): ialloc: dup alloc
syncing disks... done

DUMP: Warning: no disk available for dump.

DUMP: first crash dump failed: attempting memory dump...
DUMP: compressing 66704KB into 933911KB memory...
DUMP:  Starting Address      Ending Address   Size(MB)
DUMP: ------------------   ------------------ --------
DUMP: 0xfffffc003fb50000 - 0xfffffc003ff51fef 4.0 (indicator)
DUMP: Writing data

Fausto Saporito ha scritto:
> Hello,
>
> just a little update, with FULL SCSI config, I have this error during 
> the boot:
>
> Assigning a cluster device number to root
> prom_getenv: Unable to convert 'IDE 0 15 0 0 0 0 0'
> cdisk_ioctl: XPT_GET_LOG failed
>  device_translate: device cannot be translated 'IDE 0 15 0 0 0 0 0'
>
> regards,
> fausto
>
> Fausto Saporito ha scritto:
>   
>> Hello,
>> i did other test... it seems IDE cdrom doesn't work very well under Tru64.
>> My best configuration right now is IDE disk, and SCSI cdrom, but even in 
>> such case I have some timeout error, like that one I described in my 
>> previous email.
>>
>> If I try with a full IDE configuration I'm not able to start the 
>> installation
>>
>> With a full SCSI configuration the emulator crash when Tru64 try to 
>> format the disk.
>>
>> regards,
>> fausto
>>
>> Fausto Saporito ha scritto:
>>   
>>     
>>> Hello all,
>>>
>>> I'm trying again the Tru64 installation with the latest CVS.
>>> I remembered that floppy code now was ok, but I got some errors during 
>>> the boot of "installation cd".
>>> I'm using a real cdrom, not the ISO image.
>>>
>>> Here they are:
>>>
>>> (During boot of Tru64 5.1 - on the es40 console)
>>>
>>> DMA-I-RESET: DMA 0 reset.DMA-I-RESET: DMA 1 reset.dma: command register 
>>> 0 writte
>>> n with 10
>>> dma: command register 1 written with 10
>>> dma: mode register 1 for channel 7 written with 0
>>>     Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
>>> dma: extended mode register 13 written: 03
>>> dma: mode register 1 for channel 7 written with 0
>>>     Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
>>> dma: extended mode register 13 written: 03
>>> dma: mode register 1 for channel 7 written with 0
>>>     Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
>>> dma: extended mode register 13 written: 03
>>> dma: mode register 1 for channel 7 written with 0
>>>     Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
>>> dma: extended mode register 13 written: 03
>>> dma: mode register 0 for channel 3 written with 0
>>>     Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
>>> dma: extended mode register 12 written: 03
>>> dma: mode register 0 for channel 2 written with 0
>>>     Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
>>> dma: extended mode register 12 written: 02
>>>
>>> at floppy probe, instead these are the errors on alpha console:
>>>
>>> <FDI: FATAL ERROR #114  sra:00000000 dor:00000000 msr:00000000>
>>> <FDI: FATAL ERROR #125  sra:00000000 dor:00000000 msr:00000000>
>>>  fd internal driver error: FDI PROBE FAIL (A,11).
>>>
>>> fdi0 not probed
>>>
>>> then I have some errors (timeout) on hard-disks (on alpha console):
>>>
>>> ata0 at pci0 slot 15
>>> ata0: ACER M1543C
>>> scsi0 at ata0 slot 0 rad 0
>>> cam_logger: SCSI event packet
>>> cam_logger: bus 1 target 0 lun 0
>>> ss_perform_timeout
>>> timeout on request on the bus, scheduled bus reset
>>> Active CCB at time of error
>>> cam_logger: SCSI event packet
>>> cam_logger: bus 1 target 0 lun 0
>>> ss_perform_timeout
>>> timeout on request on the bus, scheduled bus reset
>>> Active CCB at time of error
>>>
>>> (while on es40 console I have):
>>>
>>> ide1.0 aborting on command 0xec
>>> ide1.0 aborting on command 0xc6
>>> ide1.0 aborting on command 0xc6
>>> ide1.0 aborting on command 0xc6
>>>
>>> regards,
>>> Fausto
>>>
>>> -------------------------------------------------------------------------
>>> Check out the new SourceForge.net Marketplace.
>>> It's the best place to buy or sell services for
>>> just about anything Open Source.
>>> http://sourceforge.net/services/buy/index.php
>>> _______________________________________________
>>> Es40-developers mailing list
>>> Es4...@li...
>>> https://lists.sourceforge.net/lists/listinfo/es40-developers
>>>
>>>
>>>   
>>>     
>>>       
>> -------------------------------------------------------------------------
>> Check out the new SourceForge.net Marketplace.
>> It's the best place to buy or sell services for
>> just about anything Open Source.
>> http://sourceforge.net/services/buy/index.php
>> _______________________________________________
>> Es40-developers mailing list
>> Es4...@li...
>> https://lists.sourceforge.net/lists/listinfo/es40-developers
>>
>>
>>   
>>     
>
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> Es40-developers mailing list
> Es4...@li...
> https://lists.sourceforge.net/lists/listinfo/es40-developers
>
>
>