Re: [ES40-developers] tru64 boot probs

[Fausto S. <fa...@un...>]

Hello,
i did other test... it seems IDE cdrom doesn't work very well under Tru64.
My best configuration right now is IDE disk, and SCSI cdrom, but even in 
such case I have some timeout error, like that one I described in my 
previous email.

If I try with a full IDE configuration I'm not able to start the 
installation

With a full SCSI configuration the emulator crash when Tru64 try to 
format the disk.

regards,
fausto

Fausto Saporito ha scritto:
> Hello all,
>
> I'm trying again the Tru64 installation with the latest CVS.
> I remembered that floppy code now was ok, but I got some errors during 
> the boot of "installation cd".
> I'm using a real cdrom, not the ISO image.
>
> Here they are:
>
> (During boot of Tru64 5.1 - on the es40 console)
>
> DMA-I-RESET: DMA 0 reset.DMA-I-RESET: DMA 1 reset.dma: command register 
> 0 writte
> n with 10
> dma: command register 1 written with 10
> dma: mode register 1 for channel 7 written with 0
>     Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
> dma: extended mode register 13 written: 03
> dma: mode register 1 for channel 7 written with 0
>     Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
> dma: extended mode register 13 written: 03
> dma: mode register 1 for channel 7 written with 0
>     Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
> dma: extended mode register 13 written: 03
> dma: mode register 1 for channel 7 written with 0
>     Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
> dma: extended mode register 13 written: 03
> dma: mode register 0 for channel 3 written with 0
>     Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
> dma: extended mode register 12 written: 03
> dma: mode register 0 for channel 2 written with 0
>     Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
> dma: extended mode register 12 written: 02
>
> at floppy probe, instead these are the errors on alpha console:
>
> <FDI: FATAL ERROR #114  sra:00000000 dor:00000000 msr:00000000>
> <FDI: FATAL ERROR #125  sra:00000000 dor:00000000 msr:00000000>
>  fd internal driver error: FDI PROBE FAIL (A,11).
>
> fdi0 not probed
>
> then I have some errors (timeout) on hard-disks (on alpha console):
>
> ata0 at pci0 slot 15
> ata0: ACER M1543C
> scsi0 at ata0 slot 0 rad 0
> cam_logger: SCSI event packet
> cam_logger: bus 1 target 0 lun 0
> ss_perform_timeout
> timeout on request on the bus, scheduled bus reset
> Active CCB at time of error
> cam_logger: SCSI event packet
> cam_logger: bus 1 target 0 lun 0
> ss_perform_timeout
> timeout on request on the bus, scheduled bus reset
> Active CCB at time of error
>
> (while on es40 console I have):
>
> ide1.0 aborting on command 0xec
> ide1.0 aborting on command 0xc6
> ide1.0 aborting on command 0xc6
> ide1.0 aborting on command 0xc6
>
> regards,
> Fausto
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> Es40-developers mailing list
> Es4...@li...
> https://lists.sourceforge.net/lists/listinfo/es40-developers
>
>
>