[ES40-developers] tru64 boot probs

[Fausto S. <fa...@un...>]

Hello all,

I'm trying again the Tru64 installation with the latest CVS.
I remembered that floppy code now was ok, but I got some errors during 
the boot of "installation cd".
I'm using a real cdrom, not the ISO image.

Here they are:

(During boot of Tru64 5.1 - on the es40 console)

DMA-I-RESET: DMA 0 reset.DMA-I-RESET: DMA 1 reset.dma: command register 
0 writte
n with 10
dma: command register 1 written with 10
dma: mode register 1 for channel 7 written with 0
    Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
dma: extended mode register 13 written: 03
dma: mode register 1 for channel 7 written with 0
    Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
dma: extended mode register 13 written: 03
dma: mode register 1 for channel 7 written with 0
    Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
dma: extended mode register 13 written: 03
dma: mode register 1 for channel 7 written with 0
    Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
dma: extended mode register 13 written: 03
dma: mode register 0 for channel 3 written with 0
    Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
dma: extended mode register 12 written: 03
dma: mode register 0 for channel 2 written with 0
    Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
dma: extended mode register 12 written: 02

at floppy probe, instead these are the errors on alpha console:

<FDI: FATAL ERROR #114  sra:00000000 dor:00000000 msr:00000000>
<FDI: FATAL ERROR #125  sra:00000000 dor:00000000 msr:00000000>
 fd internal driver error: FDI PROBE FAIL (A,11).

fdi0 not probed

then I have some errors (timeout) on hard-disks (on alpha console):

ata0 at pci0 slot 15
ata0: ACER M1543C
scsi0 at ata0 slot 0 rad 0
cam_logger: SCSI event packet
cam_logger: bus 1 target 0 lun 0
ss_perform_timeout
timeout on request on the bus, scheduled bus reset
Active CCB at time of error
cam_logger: SCSI event packet
cam_logger: bus 1 target 0 lun 0
ss_perform_timeout
timeout on request on the bus, scheduled bus reset
Active CCB at time of error

(while on es40 console I have):

ide1.0 aborting on command 0xec
ide1.0 aborting on command 0xc6
ide1.0 aborting on command 0xc6
ide1.0 aborting on command 0xc6

regards,
Fausto